Oddly Satisfying Hacks for Tiny Spaces

No video

Oddly Satisfying Hacks for Tiny Spaces

Рет қаралды 28,334

Күн бұрын

The first 3 weeks living full-time in our unfinished camper van.
Gain exclusive access to behind the scenes content and my Discord community by becoming a patron: / morleykert
WATCH OUR FULL VAN BUILD HERE: • Van Build
THINGS I USED IN THIS VIDEO:
Bambu Lab X1 Carbon Combo 3D printer: shareasale.com...
Bissell Pet Vacuum: amzn.to/46XzjBL
Milwaukee M12 Cordless Drill/Driver and Impact Driver: amzn.to/3XHSYCd
Towel Bar: amzn.to/3T3OHZS
Ventilation fans: amzn.to/4a6SRGg
Milwaukee M18 FUEL Oscillating Multi-Tool: amzn.to/4a49AtN
RuuviTag wireless bluetooth temperature sensor: amzn.to/49Wfmh8
CA glue with activator: amzn.to/3QQ8jit
ELECTRICAL SYSTEM:
Blue Sea Systems Battery Switch: amzn.to/49wSXHg
Blue Sea Systems AC Main panel: amzn.to/47kGBAx
Blue Sea Systems 12 volt fuse block: amzn.to/3Qosrqs
Save $50 on Battle Born Batteries and 25% on merchandise with the below link and code "morley":
battlebornbatte...?afmc=ku&
Batteries - 270Ah 12V LiFePO4 Deep Cycle GC3 Battery: battlebornbatt...
Bus bars - Victron Lynx Distributor: battlebornbatt...
Battery monitor - Victron BMV-712 with bluetooth: battlebornbatt...
System monitoring - Victron Cerbo GX: battlebornbatt...
Touch screen - Victron GX Touch 50: battlebornbatt...
Solar panels - 2 x 200W 12v monocrystalline solar panels: battlebornbatt...
Solar charge controller - Victron SmartSolar MPPT 150/70: battlebornbatt...
Inverter charger - Victron Multiplus: battlebornbatt...
Alternator charger - Victron Orion-Tr Smart 12/12-30A non-isolated: battlebornbatt...
MY FAVORITE THINGS:
www.amazon.com...
Note: The above shopping links are affiliate links, meaning that, at no additional cost to you, I may earn a commission if you click through and make a purchase.
MUSIC (in order of appearance):
Antidote X - Van Sandano
Formations - Van Sandano
Organic Playground - Chill Cole
Kreuzberg Walk - Wendy Martini
Just Don't Talk - Giant's Nest
Sumerian Paradise - Dew of Light
A Whole Generation - Spring Gang
No Spark - White Bones
Voices - Magnofield
Sunrise Determination - Eden Avery
INSTAGRAM: / morleykert
TWITTER: / morleykert
TIKTOK: vm.tiktok.com/...
morleykert.com/
#DIY #vanlife #3dprinting

Пікірлер: 185

@kDub1129 8 ай бұрын

For the drawers you could use a magnetic toddler latch to keep them closed. A small magnet serves as a key to open the doors and the latch is hidden inside so there’s nothing visible on the outside. You can either leave them engaged all the time or switch the magnet on when you’re hitting the road.

@collie147 8 ай бұрын

Was thinking exactly the same!

@Golden-Nutmeg 8 ай бұрын

Was just about to comment the same thing! Great idea! :)

@JollyRogerHobbies 8 ай бұрын

I second this. The magnet locks are tried and true for this type of camper/trailer cabinetry. Good luck 🍀

@--Zeke-- 7 ай бұрын

Just came down here to say the same thing!

@user-zb9of5fy3t 26 күн бұрын

I fifth this I was gonna say the exact same thing

@FixitFingers 8 ай бұрын

You should do one of these every few months... and Bamboo Printers should be paying you more as every single Van-Lifer is going to want one now. Just an epic tool to have along for this sort of thing! :D

@daylen577 8 ай бұрын

Most RVs just use latches on drawers and cabinets, either ones you can leave open when you're parked for a period of time or ones that you can easily open when you need to access them. A latch per drawer/cabinet is more hardware, but also means that if you print them and one fails you can have a new one ready within a few minutes and it also reduces the severity of a failure to just one drawer/cabinet

@aussiemikeysaru 8 ай бұрын

For the shower hose, you've had it connected the wrong end. The end you connected to the faucet (the tapered connector) should be the side connecting to the shower head so it can fit in the holder correctly

@Napkiner 8 ай бұрын

This is legit one of your best videos yet. I’m about 4 mins in and you’ve done like 4 videos worth of projects and custom solutions

$@Refract3d$

@Refract3d 8 ай бұрын

For the smoke alarm, there are different types. (Ionization vs Photoelectric). The ionization type will pop off more frequently in a kitchen due to the aerosolized particles cooking creates even if it doesn't make smoke. Try getting a photoelectric type which will alarm you when there's smoke rather than particles in the air. Both will let you know if there's an actual fire. But try to avoid one that actually has both types, as it will pop off if either type is detected.

@mikededmon 8 ай бұрын

As for the cabinet drawers. It would be a more complicated build, but how about handles similar to some you see on filing cabinets. The handles have a side knob that disengages 2 latches on the inside of each drawer. So, it's always locked, but to open it you grab the handle, press the button and open the drawer. Then they latch every time you close them. Different handles, but maybe less ugly than external latches, etc.

@zklinski 8 ай бұрын

@Morly Kert in 7:20 the tube for the water faucet is backwards that's why it doesn't fit. In any case, keep up the great work, love watching your videos, and the way you approach things

@shneeblee180 8 ай бұрын

You could use child proof locks on the draws that will stop them from opening

@SimplySellers202 8 ай бұрын

It doesn't have to be perfect to start, but you have to start to make it perfect.

@thenextlayer 8 ай бұрын

LOVE these types of videos man, keep them up! I'm only half way through the video, but I'm REALLY curious how much filament you brought with you, and where/how you're storing it? My filament collection would probably fill the entire van... Also, I bet you could design something to put the printer on some sort of vibration compensation, such as some legs, or even shock absorbers, which would improve print quality while driving. It would be a cool video, actually.

@MorleyKert 8 ай бұрын

Thanks! I brought 3ish rolls of PETG and 2 rolls of PLA, just stored in the AMS or in plastic bags with desiccant. Easy to order more on the road and have it drop shipped to locations on the way!

@iAkashPaul 8 ай бұрын

For the drawers ,the way airlines lock stuff in lockers with the twisting knobs across two drawers should be painless & 3D printable

@aaronbrenkus9126 8 ай бұрын

use a lock bar for the drawers, inset a groove in the underside of the countertop and put a lock on the bottom, this is how things are built for ships and RVs

@rachmuffins7 8 ай бұрын

Maybe strong magnets for the ceiling with your overhead cabinets? Just a thought. I'm glad you're having fun with it! I love build problem solving as well. We have a nearly 100 year old house, and there have been many fun challenging solutions to figure out! I also absolutely LOVE your laptop holder! I would definitely use one of thise. 🙌

@CarolHewett-ug2cw 8 ай бұрын

Great solutions. However, don't despair; one doesn't need to design and print custom devices. Low tech simple carpentry with a vast array of hardware to choose from will solve the problems too. And you are so right about those underutilized clamps.

@williammaxwell1919 8 ай бұрын

I wasn't going to watch this video because I'm not into "van life", but glad I did. I like the short "problem /solution" vignettes ~ got some ideas to solve problems I didn't know I had

@Agreenlilly 8 ай бұрын

I used to have Ikea cabinets that opened from the bottom and I sat them on my head all the time too 😂 I had a roll of aluminum foil that I used to prop them open to put away dishes. What about a dowel along the bottom edge of the cabinet door, with a hinge on the right or left. When opening the cabinet you can fold out the dowel and place in a small recess in the cabinet body so it doesn’t slip.

@daddouuuu 8 ай бұрын

latches will be your best friend for the drawers...sometimes you gotta give up a tiny lil bit of looks for good utility in a Van. There are 1 dollar latches at Home Depot that actually work very well (the ones with the 2 little "wheels" that catch a little piece of metal)

@6442353 8 ай бұрын

For drawers you can use marine/rv Push Button Latch Lock

@artanisH847 8 ай бұрын

for the drawer you can use one of the children protection, i have these, and you put them inside. to open them, you can simply put the provided magnet on the place of the bracket and it opens

@adamdart6809 5 ай бұрын

you should get toggle latches for your upper cabinets with an extra hook you can even use it to hold them open

@netposerx 8 ай бұрын

You have the best idea about the van. Get it good enough for the road and use your experience on the road to figure out what works, what doesn't and what you need/want after being on the road.

@MorleyKert 8 ай бұрын

💯

@SexyEarHair 6 ай бұрын

11:28 make a slot in the laptop holder for the charging cord. Charge it while on the road or not using so its always ready for you.

@tylers4645 8 ай бұрын

Magnet for the drawers comon a ratchet strap 😂. And you need dowel pins to stop the fridge and washer from coming off the wall on their bearing slides as well, could even use a gate latch for a fence. You can 3D print one even. Don’t use stuff you need to take down all the time. You said it yourself you don’t need to take one tool or one item off just to use another. Ratchet strap is a tool you’re using to hold another tool. Make a custom holder that’s permanent spend some time designing. Make more iterations and versions of your designs don’t settle in the first one always you’ll get stuck designing stuff that might not work or might not be the best solution sometimes

@wbeel 8 ай бұрын

Have a look at drawer locks for sailboats maybe? I believe there are locks that open the cabinet with a push.

@HappyLooter 8 ай бұрын

I've been waiting for this video! Cool 3d printed solutions to unique van-life problems

@netposerx 8 ай бұрын

I have that exact fridge. It's about 6 years old now and it started rusting on the inside. It's coated metal and the moisture created rust and the coating peeled off in places. I cleaned it up and painted the problem areas. Fridge works like a champ.

@MorleyKert 8 ай бұрын

Good to know, thanks!

@coolduder1001 8 ай бұрын

I would have made some sort of lock that goes in a cut out in the top left of the drawers. A little toggle switch that sits flush to the surface and goes inside the framing in the locked position.

@aaronbrenkus9126 8 ай бұрын

and, one BIG thing, BOLT DOWN your Printer and other stuff that is big, use shock mounts where needed, but that is SUPER unsafe for you guys. If you don't wanna fabricate you can buy the stuff needed from an RV center. I love your videos, and maybe someday when I'm retired I will do the van thing around America/Canada to see it better. Good on you guys for going for it.

@griefman6550 8 ай бұрын

Not sure they're strong enough to hold closed, but what about push to open drawer slides? the kind that click closed and release when you push them in. Gets rid of the handles too, which adds 2 inches of space to the corridor.

@ReallyGhey 8 ай бұрын

Loved this video! Real time solving of problems on the road. Keep them coming 🎉🎉

@Dekotale 8 ай бұрын

Maybe you could use multiple strong magnets for the doors? That would reduce the vibration and let you open and close them easily.

@Nick-qz8do 8 ай бұрын

I think electromagnets would be better. Enable while driving and disable to open easier when stationary

@massivekoala4878 8 ай бұрын

came to this guy's channel to learn about building. Finds out he's a fucking genius. Subscribed

@AlessandroTischer 8 ай бұрын

The bambulab printer has a very advanced vibration compensation system which is intended to eliminate the vibration that the printer creates itself. I can bet the print quality is mainly impacted by the vibration compensation going crazy. I don't have a bambulab printer so I don't know, but if it's possible to disable the compensation system you may get better prints while driving!

@rosserobertolli 8 ай бұрын

That sounds like the worst printer to take on the road. My printer has a solid enough frame in order to reduce vibration, I've had it printing in a car mutltiple times and even on the back of a bike (the last one did suffer a bit from vibration though, but still, on a bike)

@jeremyspecce 8 ай бұрын

@@rosserobertolliisn’t he talking about the same printer you have??

@ThePrintHouse 8 ай бұрын

This is so great. I love this video. Back to the old style of video but still incorporating your new lifestyle. So good!!! :D

@NicoSmets 8 ай бұрын

I love your little work corner.

@TheExploringBiker 8 ай бұрын

If you do end up keeping the truck strap idea, then you need to print some corner protectors or the strap is going to wreck the edges of the worktop and bottom drawer.

@chriswtburke 8 ай бұрын

baby drawer latches for the drawers.. should work perfect. they'll pop out 1" on the hard turn, but won't open unless you latch them yourself.

@GregTheJunior 6 ай бұрын

3d print and redesign Vertical toggle clamps for your drawers.

@TheNewBloodDan 8 ай бұрын

9:50 just get rotating paddle thingies screwed to each side of the panels the drawers are between and when you don't want them to move , have the paddles rotated to be on top of the drawers. The draws would be stopped by those paddles. Would be super easy and quick to print!

@jimrosson6702 8 ай бұрын

Great video you just need to get cabinet draw locks and overhead cabinet cabinets locks for campers and RV will solve them problems

@jamesmckillican652 8 ай бұрын

For a cheap quick fix you can use a steel bar like ppl use for a rolling toolbox

@lorenworthington8739 8 ай бұрын

Nice video. We have 20+ things I’ve designed and printed for our van and counting.

@shanomac 8 ай бұрын

Great going Morley. Really love the iterative approach to the problem solving and your optimism through it all.

@PicklesVTYT 8 ай бұрын

This video feel like its inspired by Van Neistat. Truly a spirited man

@LordTheft 8 ай бұрын

Fun video! Can't wait for the next one.

@seanharris8328 8 ай бұрын

Check out Ambitious Strike's truck camper solutions. They rigged up electro magnetic drawer locks that would energize on a switch or whenever the truck was in drive.

@tricky0001979 8 ай бұрын

Sometimes you have to live with things to experience their flaws, glad you are somewhere warmer than Canada for winter, I agree with Eden a heater is a must. There are locks that caravans and boats use to lock drawers so maybe look online to see if you can use them to lock it whilst in transit. Short of shoving a metal bar down the handles and screw it to the floor and countertop. Stay safe and have fun.

@katebattersby4691 7 ай бұрын

I want that custom mini-vac holster!!!

@simplyx8906 7 ай бұрын

You should get those magnetic window frames to cover them so people don’t see you have a couple thousand dollar laptop on the wall and so they don’t think your living in there, when you travel try not to let to many people see you live in it cuz the moment you leave your van for an hour or two desperate people will rob you, I’ve seen it too many times to van lifers and I just don’t want it to happen to you guys :) oh and the drawers in the kitchen you could always switch them to the magnetic latch system or the button lock system where you press a button and it slides out slightly.

@MrSkoobii666 8 ай бұрын

for the drawers, look at boat and r/v drawer hardware

@TheRealEstate 8 ай бұрын

So glad to see you guys!! Great solutions so far!!

@m.waleed.h 8 ай бұрын

For the 3d printer to work during travelling, you could go to an over engineered solution of gimbling the whole printer with some shock absorbing like the way they do with cameras in film production, or a simple solution of using springs/neumatic actuators that absorb shocks and keep it level during driving.

@robertalvarez5741 8 ай бұрын

Small struts for upper cabinets

@cheesesilk 8 ай бұрын

Awesome guys ! Loved this update. Inspiring fixes

@user-tj9yk6gw9i 8 ай бұрын

That's cool y'all went to St. George Island. I live and work out that way.

@MorleyKert 8 ай бұрын

It’s beautiful!

@thicccmama 7 ай бұрын

Have you ever considered using baby proofing materials for your drawers?! I think it would work well!

@KenR3D 8 ай бұрын

Latches on the cupboards. Or could do sunken magnets

@ElderSilverFox 8 ай бұрын

I'm only an hour from Asheville. Would totally be awesome to catch up and show you some cool local spots.

@TheRealClutch1010 8 ай бұрын

Magnetic child locks for the drawers? Even non-magnetic ones, just the hooks you can push down to release. Both are hidden and easily opened.

@EliasJohansson-cc3td 8 ай бұрын

put strong magnets in the drours to stop them from sliding open

@MrReza656s 8 ай бұрын

Small CAbinet locks!!

@lolmandood 8 ай бұрын

Button locks for the drawers.

@mathegenie13 8 ай бұрын

thing for the shower doesn‘t fit because you put hose the wrong way round. love ur stuff

@diginomad6016 8 ай бұрын

Next feature to add is "Do a barrel roll" mode 😂. Great video guys ...

@ryandury 8 ай бұрын

A dowel / pole that fits into one 3D printed part that's attached to the toe-kick (and somehow swivels out when you need it) and the other end of the pole slips into a circular recess under the counter

@davesconfused12 8 ай бұрын

It's inspiring to see your progress. Do you plan to have release more detailed videos about your 3d modelling and product development?

@MorleyKert 8 ай бұрын

Yes!

@spinyuk 8 ай бұрын

The laptop holder is inspired, something like that would be useful in my office, just as much as in my own van :)

@ineedtowin 7 ай бұрын

For the drawers can't you simply put locks on them. U can get office drawers where one key locks all drawers

@gaffyh1745 8 ай бұрын

What about rotating cams to lock the drawers? Or check out child safety locks and replicate something similar

@kwatee 8 ай бұрын

I didn't read all the previous comments so, this might be redundant. Maybe look at some of the solutions that some of the service companies use to keep all their drawers and cabinets secured. One of the ideas that comes to mind is the way rolling tool chest drawers are secured. Just a bit of spit balling from a grateful viewer :)

@WoLpH 8 ай бұрын

That fan shroud is blocking most of the air, I would suggest a more open variant.

@iris7332 7 ай бұрын

Draws can use baby protection latches brand safety first.

@elliott3142 8 ай бұрын

I would suggest that you use some invisible latch’s. Once’s that are activated by magnets or press to open. Love your videos !

@ragingroosevelt 8 ай бұрын

On boats, drawers usually have a little lip / rebate so to open them, you lift up above the lip and then pull out. Other options include a finger latch that you reach through a small hole in the front of the drawer to activate. I think there are push-button versions that do the same thing without the reacharound. Anyhow, it's a solved problem on boats.

@mauricegd 7 ай бұрын

I personally have that design in a camper that I stay in

@mauricegd 7 ай бұрын

Where you have to lift the drawer slightly to open them

@fortvendel4223 8 ай бұрын

Hi! 1. Cool video! 2. This is an idea for the drawer problem: magnets that holds it there?

@danielandres3465 8 ай бұрын

Child proof magnetic inner door locks are worth looking into.

@MyManRaptor 3 ай бұрын

Not sure if you’ll ever see this, but where in South Georgia were you? Peachtree City would be an interesting adventure for you guys.

@jonass3252 8 ай бұрын

great video, love the editing style!

@ChadimKarel 8 ай бұрын

flip the shower hose and the other side will fit the holder just fine

@deadly_dave 8 ай бұрын

Problem: Drawers opening on a hard right turn: Solution: Get the lock and locking mechanism from an old office pedestal or filing cabinet. Then you can lock the drawers when you drive.

@jurgenimbrechts6941 8 ай бұрын

I think you are using the shower-hose in the wrong direction. The side that you connected to the faucet has a specific shape to fit in the mount that you showed. It even has a rubber gasket to make it fit & hold. But you've connected the other part to the shower-head. I think if you switch it around you can mount it.

@daddouuuu 8 ай бұрын

also good job for doing all these fixes in just 10 days! I had a very hard time getting to these little fixes in my van while I was living in it. But I had a full time remote job...so that didn't help

@iris7332 7 ай бұрын

Safety 1st Press 'n Pivot Latches

@Wendy-zl8kv 8 ай бұрын

Awesome solutions! 😊

@jeremyspecce 8 ай бұрын

You’ve got plenty of good solutions for the drawers but another option is to take a look at a large tool chest, their locking systems have a common rail that lowers and raises to engage all the drawers internally, it could be on the back or the side. It could also be a common vertical rod that rotates some kind of catch into a receiver of each drawer. Just spitballing.

@thepinky9876 8 ай бұрын

use RV drawer slides.. they kinda lock when closed

@artofarock 8 ай бұрын

Great work keep it up!

@lomagibson664 6 ай бұрын

So awesome! ❤

@suszi1982 8 ай бұрын

Wouldn't be a solution for the cabinet doors magnets? You can attach magnets to your doors and use it to hold in place whichever position you want (open or colsed).

@DennAgain 4 ай бұрын

at 9:52 i feel like a way better solution would be like a child lock basically like a fridge lock with a buckle that buckles into the sides

@namanjain5581 8 ай бұрын

Drawers: get the push-click rails. 💯

@olgablonski7139 8 ай бұрын

Abby!! Miss you ❤. You guys are having so much fun. So for the drawers why can’t you do the same thing you did so the fridge wouldn’t slide out. Little glitches along the way, but fun for you Morley to figure it out.