BMX / Odyssey Clutch Freecoaster / Engagement Mechanism

Рет қаралды 72,473

8 жыл бұрын

A traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment (can be adjusted without removing the rear wheel), and a plastic hub guard. Patents pending. Shipping now worldwide.
FEATURES
Super-durable bearing arrangement throughout
Maximum strength axle design
Unique external slack adjustment feature
Super-durable drag mechanism design
Patents pending
$189.99 USD Retail (Hub and Guard)
SPECS
36-hole, 2014-T6 aluminum shell
Female inbound axle
9-T Driver
Left or right hand drive
Compatible Hub Guard (included, but optional to use)
22.5 oz / 640g
COMPLETE WHEEL OPTION
Laced to a Hazard Lite Rim
www.odysseybmx.com/catalog/com...
---
www.odysseybmx.com
htttp://store.odysseybmx.com
---
www.odsyvision.com
/ odsybmx
/ odysseybmx
/ odysseybmx
/ odysseybmx

Пікірлер: 29

@vl995 3 жыл бұрын

hey thanks for taking the time to explain it

@dksmith605 4 жыл бұрын

So whose British voice is this? George French? I've been running Odyssey parts for half my life and finally bought a Clutch today 😁

@itsreece2558 7 жыл бұрын

Will there be slag

@user-jn4hh5le5i 5 жыл бұрын

روووعه

@san_moroz 3 жыл бұрын

В1 долго живёт?

@jaredskybmx5016 4 жыл бұрын

can you help me to get rid off the wobbling on my v1?

@aidengregory9089 4 жыл бұрын

jaredbikes reyes replace the bearings, should sort it out

@extraBash 4 жыл бұрын

loctite 638 on main bearings + clutch to main pearing

@jaredskybmx5016 4 жыл бұрын

@@aidengregory9089 i already replace the bearing still wobbling

@JanoBanano1996 3 жыл бұрын

@@jaredskybmx5016 thats just how coasters are. they always gonna wobble

@likamuuk 2 жыл бұрын

@@jaredskybmx5016 probably the driver

@juansebastianrodelo6992 8 жыл бұрын

pressure can be used ??

@its_me_dave 5 жыл бұрын

There must be a third way..... 🤔

@Rose_Butterfly98 5 жыл бұрын

Sprag clutch . Onyx does it but it's heavy. Honestly, I'm contemplating either sprag clutch or free coaster , I just want a silent hub my Shimano is quite quiet but , it's not silent.

@beaterbikechannel2538 3 жыл бұрын

KHE tried this with the Rollex hub in the late 90s. It was based on the Sachs/Perry roller clutch currently used in Velosteel coaster brake hubs it was nowhere near strong enough. It took a long time to save up for that piece of crap back then.

@tough.minds1 6 жыл бұрын

I have this same hub and i have a problem where when i try pedaling it won’t engage until 3 or 4 rotations after, i’m not sure if this is fixable because i took it to a Bmx shop and they said that they can’t find the problem.

@traxxasrc10 6 жыл бұрын

Dominic did you grease it or do anything to it

@tough.minds1 6 жыл бұрын

tyler jones Nope it just started out of no where while i was ridding

@ilyketrainz 6 жыл бұрын

If you’ve already tried adjusting your slack to tighter and it’s still happening, the most likely culprit is your clutch itself, it’s beginning to wear out and not gripping as much, or your slack adjustment is wearing and it’s allowing play, the problem with going with soft parts to allow for heavier impacts is that they wear out, and if you don’t take it apart to regrease it and clean it out either you’re allowing more wear than normal

@extraBash 4 жыл бұрын

@@tough.minds1 you got to buy v2 plastic mechanism and replace old one, will work perfectly

@jamiebales8394 7 жыл бұрын

RIP Z Coaster.

@jamiebales8394 7 жыл бұрын

What do you mean, Odyssey? You've gone with a tried and tested engagement system. I see what you mean about the pawl based system. It reminds me of a pole vaulter that snaps his/her pole. The traditional clutch system is like a car's clutch, it works because it's not a sudden, catastrophic halt.

@twentytolife4401 6 жыл бұрын

That's a lie you cannot use pedal pressure with this khe style clutch. The ribs on the clutch wear down if you put pedal pressure on it when rolling backwards. That is why any coaster with khe style clutch start skipping and not engaging when you pedal. Learn to half cab, use a back brake, or get a cassette.

@manoy4335 6 жыл бұрын

nope. you can still use pedal pressure depending on how you adjust your slack. but if you continue using pressure on a freecoaster your hub wont last long i think.

@scrimanty2025 4 жыл бұрын

I used pressure on my hub, although it’s a Ceneca Freecoaster so I’m not sure if that’d change the result

@AmazingChinaToday Жыл бұрын

Start pedaling forward on any freecoaster hub and it will engage.