Ever since the widebody came out there's no looking back for me... the wide body and the wider tiers is I must!!

I just bought authentic demons 18x11 wheels for the rear of my 2007 Chrysler 300C. I got side swiped New Years and now I’m doing a custom widebody kit on the back. I’m glad to see this fit!

I added widebody wheels on my narrow T/A and they fit but rubbed a little under compression....personally I liked the way it looked

Thanks for this video! I have a 1320 Challenger that came with Nexen 275/40R20 Drag Radials mounted on 20x9.5 wheels, and just purchased a set of Demon 18x4.5 and 18x11 to use for drag racing. I installed Mickey Thompson Sportsman S/S 28/6.00R18LT's on the front runners and Nitto NT05 315/40R18 Drag Radials for the back. I went with this combo because they are both very close to 28" tall, the fronts are rated for 1,650 lbs. @ 95 psi (regular race skinnies though lighter are only rated for approx. 1,100 lbs.), and the rears should easily fit on the back without rubbing anything while giving me an extra 1" of width over the OEM tires. The rears do stick out quite a bit...

When I order my Demon wheels, I may get a small spacer, just to have a tiny bit more poke with the flare, never knew the R/T had knuckles like that, the more you know!

I’m glad I’m not the only one trying to put demon wheels on something that’s not a demon lol I wanted to run that Some set up It’s pretty hard to find fender flyers for a charger but charged MotorWorks are the only ones I know have them. Your challenger is pretty sick with that set up.

There was rubbing when I did my 275 nitto 555 G2s on the fronts, but with a hub centric spacer I was able to fix it. Compared to other 275s the nittos stick out a lot more which give it that aggressive look but it also makes it harder to gain clearance. I’m sure with a different brand tire or small spacer he’ll be able to make it work in the fronts just fine.

I’ve found some 20 demon rep weight is only 26 pounds it looks aggressive I just hate black wheels if I do I may have to ceramic coat the rim

Great video bro‼️ that car lookin good👍🏽

i wonder why it pokes more in the back than the front 18x11 up front looks NASTY🔥🔥

The 18s look way better then the 20” replicas just need the right offset

Well its official, I need the 18in demon wheels in the rear with 315s and the 20in demon replicas in the front with 275s 🤙

Here is my 2022 narrow body Challenger 1320 with actual Demon 18x11 and 18x4.5 wheels, Nitto NT05 315/40R18's on the back, and MT Sportsman 28/6.00R18's on the front: kzfaq.info/get/bejne/fK-aarGaqdepaYU.html

I love those Demon wheels....too bad they cant clear 6 piston Brembo's. Remember "some Scat Packs came with 6 piston Brembo's."

Seen u riding round the track last night🔥🔥🔥

Not a bad setup at all with the Narrow Body Challenger!

Found your channel last night! Awesome content! Have a question though..... I have a 14RT and I’m looking into the exact widebody kit you got on your chally. In regards to the wheels, I wanted to see if you know if I could possibly run the redeye 20 by 11 inch wheels on 305s on all 4 corners? I know the oem redeye wheels are a -2.5offset. Wanted to see if I would have rubbing issues at all? I am on full stock suspension btw. If you don’t know its okay. Thanks though! Looking forward to more chally vids!

Are those 18 inch demon rims ? That’s what I want on my 2022 rt … love the look ?

Thanks. I have been trying to find 18" wheels for my track day Challenger. I think I've found them.

Hey ? I have a 19 redeye widebody & I really want to get the demon wheels I have 6piston brembos if I down grade to 4 piston will that mess with any of the computers??? Abs n all that ???

The wide body cars would look better with a 2" spacer on the front when running skinny drag tire/wheel combos.

Dope 🤙🏻🤙🏻🤙🏻

Great video. I have an '09 SRT-8 and was considering putting 18x11 Demon wheels on the rear with Mickey Thompson ET Street Rs in 305/45R18. Have you had any differential, speedometer or other issues after your swap? Also did you modify the tune with HP or Diablo afterwards?

Really wanna see the smaller tire with the 18x11 demon reps because I might have that set up if it looks good

Do you think a 325/45/18 tires will fit in the rear without rubbing? My hellcat is not lowered.

Nice I like it & glad u shared this. Going to try putting the demon wheels on 17 rt . Curious where can u buy oem demon wheels (and oem demon tires would be sick but probably hard to get ?)

do you think the oem demon front runners can fit a srt8 with the stock front brakes?

I got a 2010 Srt8 challenger. Did you have to run spacers or anything on the front to get them working on your srt8? I have the chance to lock in a factory set with 305/40/18 fronts and nervous I’m going to run like no one’s business 😂

Hello, rear tires didn't rub against the fender with demon wheels?

If they didn’t touch I liked the look, liked the poke

What offset is those wheels at from stock? I’m wanting to run the wide body wheels on the rear for a staggered look and a bit more grip

So question, you may have said it and I missed it but you mention those tires will fit '15 and above SRT's. Can the same be said for '15 and up RT's in regards to the knuckle spacing or is it the same for all year model RT's? Or does this only really apply to these specific rim/tire combo. Excuse my ignorance as I myself have been considering doing the something similar to what you have and buying fenders and wider wheels. However the mechanical/technical know how is a bit over my head. As much as possible I want to avoid any cutting or rolling of fenders.

What about the plastic sidewalks on a scat pack 392 Will at 315 clear in the back

I have a 2012 srt8 you think I can fit the demon wheel on there

How much room is there on the rear inside for possible deeper rear offset wheels?

I will go with stock hellcat rims 9.5 inch and i will put 295/35/20 , no risks

Oh Mate, write me Back PLEASE, because i'm working on my 2006 Dodge Charger R/T DAYTONA, what i've imported fresh by myself from NC to Bavaria Germany....and i'm doing a Not so common custom Project in it...with the will to get a little look like the Dodge Demon. Because i didn't got those original 18 Inch Demon wheels i was looking for something else like that. So i would not Go with the common 20" rim Sitzes; i've bought VORS TR4 rims with the Offset of 22 in 19×10.5" for front and rearend. I've also BC coilovers, what looks like yours. And i'll use 255/45 R19 at the frontend (a little stretched tire Look) and 285/40 R19 at the rearend for a meaty look like the Demon wheels... But at the Moment im still waiting for the rims. And now YOUR Video ist the 1st were i could see a little more about that Demon wheels in a RT. Yes, my one is a Charger ob the 2006 LX Platform. But i can't beleave that there is a big different about the knuckles/spindles or something else like that to your Challenger RT. And about my rims; they're using the Offset of 22 mm with the rim wide of 10.5". So i know i have to use spacers at the frontend. But i don't know how big they must be that the rim doesn't scratching insides/on the spindles/knuckles. I think i should have to use 10mm spacers to get a Offset of 12mm with those 22mm Offset rims... Or if 7mm spacers could Help against the hit in the knuckles/spindles, i would use 7mm spacers. Then i have an Offset of 15mm with that 22mm Offset rims. BUT WHAT SIZE ARE THOSE DEMON RIMS??? the wide and offset of the Demon rims is so interesting for me. So you could tell me that, PLEASE??? Have a great day 🍀👋🙂 best regards from Bavaria, Germany Till

How big are the demon rims and where do you order them ?

It would seem that the as of yet answered question is, does a specific size tire exist that will allow the OEM Demon wheel fit on the front without rubbing? Has anyone been able to test and verify this yet?

Will they fit a 2016 hellcat but only the rear wheels and tires ?

Where’d you order yours from?

Now get the Lil Devil Fender Flares

Did you tried the smaller tires?

But do they fit on a 68 Charger? 🤣

So can we see the vid with the smaller tires ;P

Whats size is your tires

Can u turn with no rub.

Its too low! That and the tire is the problem. There is no difference in the knuckles really.

really close to that Fender 🤔

Thats an adaptor not a spacer

Tight fit? Let's be real, that's not even drivable... I imagine the minute you sit in it, it's going to destroy your quarter-panel lip, tire, etc.

Just wanted to say thanks. This video was beyond helpful. I just picked up a set of oem 18 demon wheels and mounted them up on my 2010 srt8 challenger today! kzfaq.info/get/bejne/abthfJV60rWpiqc.html

Those 2” spacer and wheels are trash! Buy a wheel that fits!

Spend the money and get the right offset wheels.. The difference in wanting a setup that actually works verses trying to look like a baller...