MY comments about the Corvair mechanical fuel pump.
Пікірлер: 24
@TheEDNC2 жыл бұрын
As a former Spyder owner and engine master mechanic, I would ditch the mechanical pump for an electrical after my first build seized from fuel leakage. Converting my Corvair engine builds to electric pumps was far superior as the failure rate of these OEM diaphragm units were notoriously too risky especially if tracking it.... BTW this little pump is modeled after a human heart...
@slickraft2 жыл бұрын
I've had two e-pump failures in 5 years so not much better than aftermarket mechanical versions in my experience. It's the owner's choice what to choose. I currently have two Vairs with e-pumps and 5 with mechanical. As they say, your mileage vary. :)
@TheEDNC2 жыл бұрын
@@slickraft The ONE big difference is that when an E-pump fails, it doesn’t flood the case with gasoline.
@slickraft2 жыл бұрын
@@TheEDNC In my experience, few pumps fail that way. I've owned and driven Corvairs since 1977. I've never had a pump leak into the crankcase so that is not something I worry about much. I do show how to modify the factory drain path for those who live in fear of rare failures like that.
@TheEDNC2 жыл бұрын
@@slickraft ‘72 myself 👍 .... any that are turbocharged?
@MyEyesBled2 жыл бұрын
EDNC
@chopperides3 жыл бұрын
I just found your channel. That is a really cool way to handle a couple of common problems!
@whototeru3 жыл бұрын
Wish I had known about these before I decided to convert to and electric pump.
@MrGiosixaАй бұрын
Hello, my pump stop working after some time when it get hot, can you tell me why? which part problem inside?
@villixeb Жыл бұрын
Clarks doesn't even sell the mechanical fuel pumps anymore...they don't want to deal with the unpredictability
@slickraft Жыл бұрын
Yes, but Clarks has announced they are having them remanufactured for them so they don't have to warranty the junk coming out of China.
@villixeb Жыл бұрын
@@slickraft wow! Good news
@scottmagyar3 жыл бұрын
Great video, Sir was wondering is 2020 stock fuel covair pumps at local auto parts store better or do they still have issues, thanks
@slickraft3 жыл бұрын
They are better than a few years back but it's still a gamble some days. I would be sure to order from a place that will honor the warranty like a national chain store Clark's Corvair.
@haroldreyes75492 жыл бұрын
But DON'T order thermostats at the local auto parts store, ALL of them!! There is A CONSPIRACY AMONG ALL of TODAY'S AUTO PARTS STORES, concerning CORVAIRS. THEY HAVE ALL MAGICALLY DECIDED THAT CORVAIRS ARE WATER COOLED and USE ANTIFREEZE!!!!!!!! ALL STORES ARE SELLING WATER COOLED ENGINE TYPES THERMOSTATS, SPECIFICALLY for CORVAIRS!! "This will fit your Corvair", THEY ALL SAY!!!!!!! EVEN IN 1970, Corvairs DID NOT use 180°/192° water thermostats!!! WHAT THE HECK HAPPENED??????
@MrWaalkman Жыл бұрын
Just here out of curiosity, I'm done with mechanical pumps on my Corvair.
@slickraft Жыл бұрын
I've had three name-brand e-pumps fail since July. They aren't so great either.
@MrWaalkman Жыл бұрын
@@slickraft I saw that was a problem as well, so I bought multiples from various sources. We'll see how it goes. The big plus for me is not having to worry about gas diluting my oil and ruining my engine.
@villixeb3 жыл бұрын
Hey...just asking (also) about the spacer and adjusting screw set you may have for sale....and what size drill should i use to make the extra drain hole? Thanks
@robertsimmons17162 жыл бұрын
Could you use the spring from an old A/C pump to insure proper pressure?
@slickraft2 жыл бұрын
In theory that would work if the rubber diaphragm material was also identical to the original material. If the rubber is harder or softer than the original then the pressure will be higher or lower than intended.
@MrNapaCorvair3 жыл бұрын
Do you make a kit with the spacer and adjusting screw?
@slickraft3 жыл бұрын
I should have a batch available to sell around mid-December. More info on Corvair Center. corvaircenter.com/phorum/read.php?1,1072514,page=1