OFF GRID FOREVER ! 12V SOLAR PANEL INSTALL ON MY ROOF TOP TENT.

  Рет қаралды 19,715

Ty Fenwick

3 жыл бұрын

STAYING FOR GRID FOR AS LONG AS YOU WANT !
12V SOLAR PANEL INSTALL ON MY ROOF TOP TENT.
In the past my solar setup has been a bit hit and miss, however it was time to sort it once and for all using good quality glass panels.
I have used flexible panels, portable panels in the past but i just wanted to go back to good old glass panels on my new bush company tent.
I have found a very similar 120W panel on Amazon:
I have an affiliate link below.
amzn.to/3WoAcOV
The panels i used were Alvolta on eBay, quick search should bring them up.
Check out official F-TECH gear at:
f-tech.com.au/
Check out some outdoor gear I use on my Amazon store here:
www.amazon.com/shop/tyfenwick
Follow me at:
lucky9design
f.tech_overland
Olight Discount use code: FTECH10
olightstoreau.idevaffiliate.com/227.html
Please like & subscribe !
See you in the next one 🤙🏼
Music:
NCS
ARTIST:32 STITCHES
SONG:OLYMPUS

Пікірлер: 38
@alishabab3
@alishabab3 8 ай бұрын
Numbers will always get better in winter over summer if you got good sun
@CamperKev
@CamperKev 3 жыл бұрын
I agree that the black framed solar panels look much better. On the negative side, it means the panel frames get hotter, which may reduce efficiency. In practice, I'm not sure how much difference it really makes though. Your installation looks fantastic. Thanks for all the hard work you do in producing these videos.
@TyFenwick
@TyFenwick 3 жыл бұрын
Cheers Kevin 😎👍🏼
@offgrid4x481
@offgrid4x481 3 жыл бұрын
man couldn't agree more with the heat shrink, just finished wiring all my 12v panel for my canopy and the amount of times id finish soldering and think damn that's a nice connection I would then realize there is no heat shrink on it!!! haha I found the marine heat shrink is great its very think/firm and has a glue on the inside to keep moisture out.
@TyFenwick
@TyFenwick 3 жыл бұрын
Hahaha 🤣 it gets me every bloody time I’m like “ nooooo “ the heat shrink 😂
@iGoFeed
@iGoFeed 3 жыл бұрын
You have my dream rig jeez that thing is nice.
@TheAussiebloke87
@TheAussiebloke87 3 жыл бұрын
Turned out nice and neat mate, nice work
@TyFenwick
@TyFenwick 3 жыл бұрын
Thanks mate ! 😎👍🏼
@EFFICIENTSELF
@EFFICIENTSELF 3 жыл бұрын
Great job mate 👍🍻
@TyFenwick
@TyFenwick 3 жыл бұрын
😄👍🏼👍🏼👍🏼
@markspalding6092
@markspalding6092 3 жыл бұрын
Another great video Ty, mad rig you have there. That new RTT really looks the goods!
@TyFenwick
@TyFenwick 3 жыл бұрын
Thanks marks 😄👍🏼
@jumpspower-heavydutyminipo6350
@jumpspower-heavydutyminipo6350 3 жыл бұрын
Thumbs up mate
@AshleyHorne1
@AshleyHorne1 3 жыл бұрын
Great video bro! I just did a dual battery install and still kept forgetting about the heat shrink and had cutting connectors to make sure I had heat shrink on 🤣
@TyFenwick
@TyFenwick 3 жыл бұрын
Bloody heat shrink !!! 😂
@petethescalemodeller6130
@petethescalemodeller6130 3 жыл бұрын
Moosive vid mate , cheers haha :)
@iGoFeed
@iGoFeed 3 жыл бұрын
I’m favoriting this video, and bookmarking it, In hopes that one day I can make something like this happen. My own style of course, but with everything this rig has. Blown away. Here in America you never see rigs this clean. It’s always just huge lift kits and huge wheels
@TyFenwick
@TyFenwick 3 жыл бұрын
Awesome stuff Henro ! Glad this video gave you some good info mate, this is how is Aussies do big trucks 😎🤙🏼
@chrisharding795
@chrisharding795 9 ай бұрын
Very neat job mate 👍 How are the Alvolta panels going ? I’ve used heaps of them for a few years now and they are a awesome panel and the company that make/sell them Springers solar and there sister eBay company power products direct are awesome to deal with ! Any dramas with the panels take them back and they will replace them over the counter 👍
@conservativesniperhunter7439
@conservativesniperhunter7439 3 жыл бұрын
Great job big fella , now you can find an excuse to get away for a few weeks to some remote place far away from civilization 😀 .
@TyFenwick
@TyFenwick 3 жыл бұрын
Simpson desert trip all ready happening mate 👍🏼😎🏜
@conservativesniperhunter7439
@conservativesniperhunter7439 3 жыл бұрын
@@TyFenwick That’ll be a good trip I’m sure .
@Dave_Gurman
@Dave_Gurman 3 жыл бұрын
Hi Ty, If you use semi flexible solar panels in the future for mobile use may I suggest eArc by Sunman which come with a 5 year warranty and the normal 25 year performance warranty.
@TyFenwick
@TyFenwick 3 жыл бұрын
Il look into them mate cheers 🤙🏼
@SUPERTRUCKER166
@SUPERTRUCKER166 3 жыл бұрын
Looks great. Was there any reason why you went for twin 120w panels rather then a single larger panel such as a house panel?
@TyFenwick
@TyFenwick 3 жыл бұрын
I was looking at a single but wanted them to fit perfectly between the rails on the tent so these measured out perfect to fit.
@3rd_gen_j
@3rd_gen_j 3 жыл бұрын
Looks great. What roof rack is that please?
@TyFenwick
@TyFenwick 3 жыл бұрын
Yakima
@cameronscott4299
@cameronscott4299 Жыл бұрын
Just wondering how the square tube is holding up? Just mounted my bush company tent today now I need power 👌👌👌
@TyFenwick
@TyFenwick Жыл бұрын
Yeah holding up great 👍🏼
@cameronscott4299
@cameronscott4299 Жыл бұрын
@@TyFenwick cheers mate, love the videos and the rig
@chrisocallaghan9193
@chrisocallaghan9193 3 жыл бұрын
Can i ask you what RTT are you running im gunna add the 180 bush company awning to my dual cab 79 and interested to know about the RTT. Maybe you have done a video on the RTT if so let me know
@TyFenwick
@TyFenwick 3 жыл бұрын
Bush company tent mate, video before this one I show the tent
@scottdaniells8524
@scottdaniells8524 2 жыл бұрын
Hey mate what happened with the kings flexi panel? How did you mount it wrong?
@TyFenwick
@TyFenwick 2 жыл бұрын
Na that pannel was a older one, I never ended up mounting the kings one. I was using the roof of my tent and damaged it 😂🤷🏻‍♂️ going with glass panels now.
@nickd8402
@nickd8402 2 жыл бұрын
Hey curious question, I'm about to receive my Alpha RTT and I want to mount my solar panels to the roof with brackets similar to how you did yours. I was planning on pre drilling the holes and then getting the brackets painted black but I wanted to know if there was any reason you used RHS over angle or top hat? Just trying to figure out how I should do mine.
@TyFenwick
@TyFenwick 2 жыл бұрын
RHS more ridged and looks better then angle I think
@nickd8402
@nickd8402 2 жыл бұрын
@@TyFenwickoh okay cool, cheers mate