Office Chair Assembly Instructions | Cheap Office Chair with MASSAGE

Рет қаралды 11,128

Күн бұрын

Office Chair Assembly Instruction | Cheap Office Chair Review
00:00 - Intro
00:09 - Unboxing
00:45 - Office Chair Assembly Instructions
02:35 - Finished Assembly
02:40 - Operation of Two Levers
02:50 - Massage Function
03:23 - Seat Test
03:38 - Last Thoughts and Conclusions
Inside the main box are the following items:
the backrest, the seat, the base, the leg support, the armrest and a box of accessories
Inside the accessories box we will find :
the seat adjuster, some screws, the backrest bracket, the hydraulic seat post and the caster wheels
Now let's follow the Instructions to assemble the Chair!
Step One, turn the seat cushion upside down. Align the seat adjuster mechanism to the holes at the bottom and then screw them down tightly
Step Two, Secure the backrest bracket to the backrest. Align the bracket to the holes and then screw down tightly
Step Three, Insert the caster wheels to the metal chair base.
Step Four, Insert the hydraulic seat post into the middle of the metal chair base
Step Five, Place the Seat cushion on the hydraulic post.
Step Six, Insert the backrest bracket into the hole located at the seat adjuster mechanism. Then tighten the screw.
Step Seven, Install the arm rests by screwing them to the holes located at the sides of the backrest, and seat cushion.
Step Eight, Insert the leg support into the bracket located under the seat cushion.
And finally the assembly is finished!
There are two adjusting levers at the bottom of the seat. the first one will adjust the height of the seat, and the other one will adjust the angle of the backrest.
This Gaming office chair also has a very special massage function. On the left side of the backrest, there are two buttons with a usb cable attached.
The usb cable can be plugged into any usb power source. For this example I'll be plugging it into my portable battery pack.
When powered, the red button will turn on the back massager and the green one will change the massagers different modes.
Now let's test this chair out!
Not bad at all, I can definitely relax and enjoy this chair because of it's comfortable support and cushion. Time to work and play some games!
What do you think? Comment your thoughts down below, I would love to hear from you.
Anyway, thank you for watching. If you enjoyed this video, feel free to like comment and subscribe to my channel!
See you on the next build restore repair episode!
to buy the chair - www.lazada.com.ph/products/ik...
#OfficeChairAssemblyInstructions
#HowToAssembleOfficeChair
#CheapOfficeChairReview

Пікірлер: 28

@BuildRestoreRepair 3 жыл бұрын

Hi Awesome people! I hope you liked watching this video! I would love to hear what you have to say! Don't hesitate to comment!

@MissMagicMayhem 2 ай бұрын

This was one of the easiest how to videos I have ever watched. I had never assembled an office chair before, so you can teach an old duck new tricks lol. The best part of the video was the instructions weren’t rushed, so not too many rewinds. I am so pleased I didn’t have to ring my son to assemble the chair for me. Thank you 😊

@BuildRestoreRepair Ай бұрын

I’m so glad I was of help to you!! :) enjoy your new chair!

@oreogoblin4104 4 ай бұрын

Really good and a big help. This was a similar design to the chair I ordered

@christinebraganza3050 Ай бұрын

Thank you! This was super helpful! 😊

@sharagadil6593 3 жыл бұрын

the best tutorial i've seen so far. thank you 🙂

@josephasuncion207 3 жыл бұрын

nice review!

@BuildRestoreRepair 3 жыл бұрын

Thank You Joseph Asuncion! You are a very awesome person!!

@Kwendawapi 3 ай бұрын

Very similar chair to mine, and loads of chairs use the same parts and mechanism

@dianecraven8803 3 ай бұрын

What lever did you use to tilt the back of the chair at the end, mine tilts back but it will not come up again and lock back into the upright position!!!! Why is that?

@johnp8131 5 ай бұрын

Backrest bracket. Just discovered it's not a lug that fits into what looks like a slot for a lug? it goes the oposite way round so the backrest bracket bends backwards and the captive machine screw is a "stop" so the backrest doesn't drop down too far. Sorry, I only know English engineering terminology if this is confusing to some?.

@MrArloav 19 күн бұрын

Inordered online this exactly this type of chair, but the screws are missing,... just incase the seller will not reply withis issue,.. may I confirm what are the sizez of all the screws,.. they are 2 sizes set of screws but I need the sizes so I can check if they are avaible is some of hardwares..

@krisler7614 9 ай бұрын

I would like to ask if what is the size of the female usb cord in mm?

@thebaltsology246 3 жыл бұрын

This is the most presentable review I've seen so far. If I may ask how's the chair after months of usage? If I may also add it will be great if you could give the pros and cons of the things that you review.

@BuildRestoreRepair 3 жыл бұрын

The chair is holding up well. The users are small to medium built so that is a big factor. The chair is comfy and worth the price. :)

@dianecraven8803 3 ай бұрын

Four months of use and the back wont stay upright and the chair wont go up either

@marcosbaines 5 ай бұрын

not sure if you will reply to this comment but... my chair is like this one but it bend super easily, I`m not sure if its because I used the small screws (the medium ones wasnt working properly)

@Jacanna93 2 жыл бұрын

The bracket for the back rest which way does it face as there is a curve.

@johnp8131 5 ай бұрын

Same problem, this doesn't show you and the instructions show the oposite way from the slot! Just discovered it's not a lug that fits into what looks like a slot for a lug? it goes the oposite way round so the backrest bracket bends backwards and the captive machine screw is a "stop" so the backrest doesn't drop down too far.

@Mzkandy94 3 жыл бұрын

Do those metal t bar things you used to screw everything in come with the chair ?

@BuildRestoreRepair 3 жыл бұрын

Hi! Yes - they are called allen keys or Hex keys. They came with the chair. Thanks for watching!! :)

@Mzkandy94 3 жыл бұрын

@@BuildRestoreRepair ahh thank you 😀!

@joycecagaoan3997 3 жыл бұрын

That chair used to also office or computer

@ieqapyqa5742 Жыл бұрын

Help me assemble my office massage chair

@BuildRestoreRepair Жыл бұрын

Please watch the video for instructions. :)

@davidwillams5773 2 жыл бұрын

The chair company could do a better job with quality assurance. Ordered two bot with missing parts and instructions. But your video was good except you did not show where you put the little black screw.

@BuildRestoreRepair 2 жыл бұрын

Yes.. made in china items are a pain the butt most of the time..