OH32M02 build, the newest Orlandoo hunter release

Рет қаралды 10,418

2 жыл бұрын

So here it is…….. the Orlandoo Hunter OH32M02!!!!.
This is a first for me to build a Orlandoo and drive it before painting, but I was very eager to see how it drives. The build is pretty much the same as the M01 but a few extra steps. MMC is officially the first driving video on KZfaq 😊. I’d recommend upgrading the driveshafts and stronger servo. But other than that I’m very impressed with the continuing quality that you get from Orlandoo Hunter!. Massive thanks to drone junkie for the early hook up 🤟😎. These will be available to buy from him very soon. www.dronejunkie.co.uk/
Thanks for watching
Music:www.bensound.com

Пікірлер: 25

@rcplaytime 2 жыл бұрын

very very nice 😀 👍 👍 👍 😎

@madsrcbuggy 2 жыл бұрын

Nice one, Mike! It's a cool looking truck (or lorry), I'll be looking forward to seeing your special MMC additions to it. I think the yellow/black theme will be great, also on this one. I have completely given up building Orlandoos by now, but I do enjoy watching them being built on video, ha ha!

@mikesmancave5505 2 жыл бұрын

Cheers buddy 🤟😎. Glad you enjoy the videos 😉. Hopefully I’ll keep them coming for you😜

@Pezzapoo 2 жыл бұрын

Had a look at them at the Funduro this weekend, and a good chat with the guys selling them, they are amazing for the size! I like these trucks more than the buggies but obvs they are not as capable as the buggies. Scale is great tho

@stevewatts3502 2 жыл бұрын

Col Nathan Jessep was wrong... you CAN handle the 30 tooth 💪👍

@DrawingBase Жыл бұрын

nice!!

@akura2 3 ай бұрын

What RPM motor did you use? I didn't hear it in the video

@chewyplains8774 13 күн бұрын

I know, old video, but do you remember what rpm motor you used? trying to figure out what I should use in mine

@mikesmancave5505 13 күн бұрын

I think I used a 150rpm. I’d recommend upgrading the driveshafts too. Good luck with your build buddy

@heroldriley9017 Жыл бұрын

Great video 😊 Did you wire the SMD's in parallel?

@mikesmancave5505 Жыл бұрын

Thanks buddy 😉. Each led has been wired individually positive and negative. Loads of cables 🤯

@evanwillard2811 Жыл бұрын

Hello sir I just received this amazing truck I’m on the suspension assembly just wondering my u bolts came in 2 different sizes does it matter where I place them also do I need to bend the bar I have the x01 and didn’t bother bending it cause it’s not causing me any problems

@mikesmancave5505 Жыл бұрын

Hmmm I’d say put the longer U bolts on the rear. I can’t remember if mine were different sizes but I’ll have a look. And with regards to the bar, I think it’s a yeah bend it. I don’t think it’ll fit if you don’t bend it. It’ll probably be to long otherwise. Good luck with the build buddy 😉

@evanwillard2811 Жыл бұрын

@@mikesmancave5505 I had to put the u bolts in the front and I will definitely bend the bar as I don’t want any problems thanks

@raffycapati 6 ай бұрын

could you share the link where to buy the appropriate battery for this? Thank you!

@mikesmancave5505 6 ай бұрын

There’s loads of room inside the cab, so I’d say anything 2s and around 400mAh would work fine.

@SANTAMILGammy 4 ай бұрын

Brother.. Which Controller and receiver are perfect for this?

@mikesmancave5505 4 ай бұрын

To be fair, there’s enough room in the cab for any receiver. My go to was the flysky gt5 with 6 channels. But I’ve just got this amazing controller [£121.80]RadioMaster MT12 Surface Radio Controller 2.4GHz ELRS/4-in-1 Multi-protocol 16CH Open Source EDGETX System Transmitter With ER3C-I/R85C Receiver RC Parts from Toys Hobbies and Robot on banggood ban.ggood.vip/14GSu

@evanwillard2811 Жыл бұрын

Hello again is there anywhere to get new axles i have gotten some sand in my m02 axle front one and it grinds something fierce lol or should i take it apart and clean the sand out

@mikesmancave5505 Жыл бұрын

Hey buddy, I’d try an clean them. I’ll look into upgrades, not 100% sure if the metal axles fit a mo2. I’ll look into it fella 😉. Chances are the bearings may be seized, either way good luck with the fix.

@evanwillard2811 Жыл бұрын

@@mikesmancave5505 ok thanks man i’ll clean it up first then i’ll do some upgrades to it

@carlbModels 2 жыл бұрын

lovely build video, but I don't think the finished product is worth it. Seriously good video though 👍🍺🇬🇧

@aimef3502 Жыл бұрын

Hello, i have a defender, can I take all electronics parts to put in a OH32M02 kit ? (With same motor, receiver, d4L, ...) ? Thanks

@mikesmancave5505 Жыл бұрын

Yes you can. It uses the same electrics. Good luck with the build buddy. Also I’d suggest metal driveshafts. The plastic ones will break. And I did end up putting a bigger steering servo as the 2.2g Orlandoo one hasn’t quite got enough power for me lol.