This is so expensive that if u actually buy it you won’t have any money left to put into it 😢

This was so helpful, thank you!! Not only helpful but enjoyable and relaxing for me...don't totally know why, haha. So, now I'm here (as a person who has never really put thought into wallets) and have spent an hour so far on your pages today with no end in sight haha

I love walletopia. These reviews are clear, informative and very specific.

I really like how the wallet looks with the ID holder attachment, a single card hold and the band attachment. Too bad the lever is a bit funky, if they had a better way to fan out the cards, I'd definitely get this one.

I am a big fan of Oh Snap. I can't say that this wallet option will be best for me, but I've been using their phone grips for years and love them. I love the ingenuity in their products and it really feels like they listen to their customers and make design updates based on that feedback. I hope this wallet succeeds and they come back even stronger next time. Another great review!

I’ve had the Oh Snap Wallet for about a week. My honest opinion. I like it as it works for me and my preferences. What I like is that I can customize it to how I want. I can attach it to the back of my phone or carry it at a slim stand alone wallet. Its well built but very thin. Definitely feels thinner than a Ridge Wallet. I can carry 5 flat cards, 4 flat cards and 1 with raised numbers or 3 cards with raised numbers. If I want to carry more than that, I can double stack the wallet and carry twice as much, but certainly would be too big and heavy to attach to the back of my phone. Room for improvement: for as thin as the actual wallet is, it’s a little heavy. I can really feel the weight when I have it attached to my iPhone 13 mini. The carbon fiber cover is nice out the box but I realize the gloss layer scratches easily and is a finger print magnet. I would prefer a matte finish instead of gloss on carbon fiber, but its not a deal breaker. I have the titanium cover as well it works just fine. I have the ID cover as well and attach it to my wallet when my wallet is not attached to my phone. I did not think I would like the ID cover as much as I do. I love how the wallet locks into the phone mount. Much more secure than other magsafe type wallets. What I think they could do better? The pricing. The ID card holder which holds one card is $35. One carbon fiber or titanium cover is $46. For just two titanium covers to cover the front and back of the wallet ($82) that’s almost the cost of a Ridge Titanium wallet. The Snapwallet Phone Mount ($9.99) stayed fastened to my cellphone case for about a week and came off. I used Gorilla Glue to re-attach it to the back of my cell phone case and its solid. Keeping it in perspective, the Oh Snap Wallet is cheaper than a Louis Vuitton cardholder wallet or other premium minimalist wallets. I love mine, but its not for everyone.

Love this wallet! My favorite by far!

Love the informative wallet vids thanks for taking the time to do them. I would like to know how durable the lever mechanism is since many reviews have mentioned it broke.

I also got this wallet and so far I love it. The only thing I wish was some key holder module. The best overall king in my opinion is still the Aviator Wallet.

I've been thinking about getting a new wallet and thanks to you this might be my next purchase, once the backorders are sorted lol. Let's see how much P&P will cost to the UK.

I am using an Ekster Carbon Fiber card wallet right now and really like it. I used a 35% off and ordered a Card Wallet (carbon fiber) with a bundled 4 modules (including the knife) and an extra cash band model so I can mimic the function of my Ekster as closely as possible. Can’t wait to get mine next month and put it against my Ekster.

Thank you for putting a video out! No one has had one yet, and I've been checking KZfaq every day

I was a little iffy about buying this wallet until I saw this very well layed out review , Now I really want one 😂

What’s weird is when you watch the ad they put out on it, @2:14, they show person opening from left top and the cards come out with the most forward card being the lowest.

I have the bellroy apex slim sleeve and the rossm. I'm considering this and the bellroy flip case second edition. Maybe carry 7 cards and no bills, maybe a few business cards. Recommend?

Great info. Thank-You. Q: doesn’t the whole magnet thing DE- MAGNETIZE the credit/debit cards? .

Great review as always! I was wondering if that Lost Dutchman Mini Franklin review was still coming at some point? I'm trying to decide which one to get between the mini Franklin and the Benjamin Bott Double Wren.

man after having my cards get messed up due to magnets. i will never have magnets in my wallet again

You guys should check out the Japanese leather Wallet from mill handmade, id love to hear your thoughts on that one

Totally agreed with the score! Keep these great videos going!

very expensive wallet, thank you for making this video, I can enjoy seeing the feature of this wallet without owning one.

hey love the videos, could you do a review on the new premium wallets from secrid with the new metal button and mechanism?

I am a backer waiting a second time for mine to arrive as the first card module was effectivly broke when it came to me.... first time around was a 6 month wait from original launch date.

First thanks 🙏 for the videos!!!

How does it compare to the ridge wallet (size wise) it looks similar in size but with two card stacks it looks thicker? Honestly ridge was slightly too thick for me. Also can you use the card module without cover plates?

I like the idea but instead of a side loader it should've been a top loader like the Ekster wallets, that would eliminate the issue with gripping the wallet will trying to get the cards out. Only other issue with the pricing.. they want $30 for a cash plate? No bueno.

That’s a pretty cool license where can I get one at?

Where can I find the Snapwallet Phone Mount mentioned in this video?

I've had the wallet since December 5th and today the plastic lever broke on me... My cards stuck out barely enough for me to pry them out, about 1/4 inch and it was pretty difficult to remove them. I wanted to like it but this did not even last me 2 weeks. Hoping Ohsnap will reimburse me as I bought a cover plate and an ID module...

One thing ive always been curious about for these types of wallets, that always make me worried to buy them. What happens if you just put one or two cards in them? Do they stay in? Do they raddle? Does the lever still fan out the cards?

How strong is the hold for MagSafe? Most MagSafe wallets just slide off.

Great review Mark. Cool wallet. But expensive.

Wait how is it 36/50? (Great review btw! Enjoyed it!)

Will it attach to an iPhone 13 and are there reports of the Ohsnap wallet demagnetizing cards?

Does the magnet miss up the strip on the back of the credit card?

I wanna buy but sadly it’s not available in my country

Fans out the cards very well

Is the outside of the wallet magnetic?

The id mod needs to be able to hold 2-3 cards and it wouldn't be that much thicker..

Diggin’ your Omega Speedy! Nice wallet; unfortunately just way too expensive and seems a bit tedious to use. I assume if I drop that at pocket height it’ll all come apart once it hits the concrete?

Wont the magnets kill the cards?

I’ve been been using a simple one pocket leather card wallet and carbon fiber money clip for years. Neither is showing any wear yet. Both together take minimal pocket space. I can carry over 20 bills, folded in half, in the money clip, or as few as two securely. Very easy to find the card I want in the card case without removing any other cards too. My point being, K.I.S.S. Simple and inexpensive is sometimes the best.

I had this wallet for one week and brought 2 card mods One broke today and the other is defective. Currently awaiting for replacements

NICE speedy!

Does the wallet stick to metal surfaces?

If they ever make an AirTag module, I’m in.

Great video. How do I order this wallet? Are they still in business?

I'm surprised you didn't mention the COUNTLESS number of people on their Kickstarter who say their levers snapped off and their bands have torn in half. OhSnap has been accused of shoddy quality control and terrible customer service on all of their products and the MagSnap Wallet is no exception.

It looks like a very expensive gimmick, Mark! You gave it 3 for usability, yet you have to hold it in a very particular way so as not to squeeze the very thin sides against the cards! The fact you have to get used to holding it in a special way means it's not that easy to use. The cost is absolutely prohibitive, I believe. Oh dear, the first wallet I actually dislike in the entire history of Walletopia! But hey, the review was spot on as always, perhaps a little too kind.

They need an adhesive version for phones

Does it de-magnetize your cards, like Pitaka?

You should of used the other card module and put two card modules together...

It does not have an apple airtag attachment… I’ll stick with my current setup…

I keep things like screw gun tips in my pocket while I'm working, all the metal things in my pocket stick to this wallet? Also what about keys in my pocket?

How do the magnets work? I thought aluminum isn’t magnetic.

OHSNAP!!! Look at those prices!!!

Is it hard to take out the middle cards??

what about RFID?

Wow and I was only able to get a ridge bcuz of 50% discount… hope this gets the same

Id like to see what happens when you drop it on the ground… wallets all over the place

U can't compare this with tapikka for thinness, the unit u got holds 10 cards but the topikka holds 6

Doez it magnetize other cards....like the pitaka does?

Interesting. You had the Indian 500 Rs. Note there. 😊

Overpriced and middle cards seem very hard to get

The best place for wallets there all ranked too

Does it work with MagSafe ? :o

Do these work with magsafe? Can I attach to my phone?

Nice speedy.

You should do drop test on these... especially for the magnetized ones. See if cards fall out and or if they would seperate.

Not for me still using my popov 5 card leather wallet still smells great

Hey. You have used Indian 500 rupees note 🎉

I’ll stick to my Gil-Tek RAW V2 thanks. Titanium and no magnets!

Hmmm not comparing it to Mod Wallet 2.0 is disenguous?

Expensive, and the mechanism for extracting the cards is inconvenient...

So if you have 8-10 cards this thing will be a brick to carry in your pocket.

Not a fan of aluminum, I love Ss feel and durability and weight

No MagSafe feature killed this option for me

Is your wallet no longer there?

Should of been a top loader and rather not have my ID exposed. I guess you can turn it around but still should have a cover plate.

Got one for sale

Spitfire Cash Light Wallet

Nice to indian cash

To bad a slim tile won't fit

Black Friday Sale!

I like this, too expensive though

Are you india?

better awaiting china version 😁😁😁

Becoming a minimalist fanatic has reduced me to watching wallet reviews but you’re an entertaining soul nonetheless, sir. Flattery aside, this wallet seems very, very, VERY gimmicky for what it’s trying to be an do. Magnets in the wallet itself will damage cards as modern card technologies use magnets themselves. The segments sound like they may be made of a cheap material, the lever mechanism looks like it could break easy, and something tells me that this “Lego wallet” would break into pieces if I, a six foot guy, dropped it on the hard tile ground of my workplace. Another concern is that each “segment” has it’s own lever mechanism, meaning they will all fan the 3-5 cards at same length repeatedly. One two three, one two three, rather than 1 through 6, if that makes any sense? It’s hard to phrase what I mean in text form, but I hope the point gets across. Not to mention these prices… this thing looked like it was around the $200 ballpark. I think I’ll stick to Rossm.

😮

So bad they stopped selling it!😢

Too pricy for me, great design but not worth it. Great Review as always! 👍🏻

Only 3-5 cards? Lol nah. I'll stick to leather wallets.

There is no way to buy the wallet in Germany, no international shipping possible in ohsnap shop, only Canada or USA. Something like that is not promoted if you want to make a sentence

Can you put an ID into the card holder?

The lever is really trash. When I finally got mine in the mail, it broke instantly

How did you got that 500 rs bill ☝️ indian

Was that a ₹500 bill?

Is that Morgan freeman I just heard 😂

Too expensive and magnets should be kept as far away from cards (and watches) as possible. The stacking system is limiting and possibly by design, so you buy additional modules. Not one for me.

Ugh my hard earned money deserve way more than a plastic enclosure that has magnets on it