120 inch pounds = 10 foot pounds

Where can I buy this

@@twostroke4life125 I bought it off ebay mate. You can buy it directly from the DK customs website.

@@TheGingybeardMan how do I do the mirror flip can you attach link to the part you need to flip the mirrors I belive it's small bracket but I can't find it qny where

@@twostroke4life125 if you have a look on my channel I did a vid on the mirror flip. All the part numbers are in the description of the vid

Cheers mate 🍺

Absolutely cleans it up.

Thanks mate 🍺

Thanks mate, the little one loves his bikes just like his old man 👍

The Gingybeard Man my oldest girl she is 5 and she is starting to come around to liking bikes too .

@@ceec6923 how good is it when your little ones pick up the same interests you have 👍

The Gingybeard Man it’s the best brother !

Thanks mate 👍

Cheers Nath 🤙

All good man 🤙, didn't seem negative you were just telling me the quality you saw on your phone 👍

It is pretty bloody loud mate but not unbearable. It's not as loud as the Vance and Hines short shots.

Mate I'd love to but there's only one small dealership out my way and they dnt do demo rides unfortunately. Maybe sometime in the future I'll go to Sydney and do one, once this coronavirus buggers off 👍

No mate I havnt touched my leg on the guage get, I'm 5 foot 9 so not particularly tall my leg sits about an inch above the gauge

Unfortunately there's no update on new wheels yet, I just bought a road/trail bike so I'll have to start saving my pennies for the rims

You're dead right mate, I didn't even realize I said foot pounds until you pointed it out to me.

All good man, I cocked up. If you look at the 1st comment I pinned you will see I listed the correct torque setting.

Nope I've since sold the bike. I'd only wrap my exhaust if it was covered in scratches and I wanted to hide them. I prefer the look of exhausts unwrapped

It's does come pretty close to the leg but doesn't touch it 👍 it's a safety measure to remind me to wear pants when riding as it gets quite warm 🤣🤣🤣

I bought it off ebay mate. I haven't seen the same ebay seller advertise anymore but I know its the A1 cycles oil pressure guage. A1 cycles is an American company and I believe they don't post internationally. Here's a link to the fuage I bought. www.a1cycles.net/oil-pressure-gauges/m8-black-on-black-oil-pressure-gauge

The pushrod covers were installed by the mechanic when I had the toque cam installed 👍

Mate I bought it off ebay. But if you google A1 cycles website they will have loads of oil pressure guages.

Hey mate i bought mine off ebay, here's the link rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F333496593445

Mate I bought mine off eBay and it definantly is the A1 cycles oil pressure gauge despite me getting ahold of A1 cycles through their website and asking them if it would fit my softail which they said no. The seller I purchased the gauge from no longer advertises them for sale on eBay.

@@TheGingybeardMan yes, I say that when I looked on eBay. sent an email to A1 cycles but most likely will say no to Australia.

I've sat on the bike with the gauge and my legs don't touch it but it does come fairly close. If you're shorter than me 5 foot 9 I'd say your leg would touch which is a pain cause the gauge gets pretty warm.

The Gingybeard Man Cool, good to know man I’m 5’10 I should be fine..👍🏻 Another thing I didn’t think about, but thanks for mentioning it.I can see it getting HOT especially with my 110se lol...

This oil pressure gauge is the A1 cycles kit

@@TheGingybeardMan Thanks! appreciate your respons! Like your vids man, waiting for winter to go away here, only thing I can do is mods to my new bike :)

@@Freezzrsvintagegarage great time of year for you to do some mods. it's nearly too bloody hot to ride here haha.

@@TheGingybeardMan it's about zero degrees overhere, salt on the roads and slippery...

Nope my leg doesn't touch it. For my height of 5,9 I do have pretty long legs.

Sorry mate, I'd love to help you out but I don't have this bike anyone. Best thing to do would be get a piece of string and roughly route it the same way I have on my bike. Then measure the string.

Hey thanks for the reply , wow ok . What have you got now ? Thanks mate I will take your advice

@@dagsharding3825 I've got a sportster 72 which I've been doing loads of vids on trying to achieve a chopper style.

@@TheGingybeardMan , yes mate I have seen that but I thought it was a 2nd bike 😁. Keep up the good work buddy

Hello, I would like to know where you order your custom pieces?

@@bmtv809 I bought the gauge on eBaywww.ebay.com/itm/333496593445 And the blue liquid I used is blue locktite which is medium strength 👍

@@TheGingybeardMan Thanks

@@bmtv809 no worries mate, happy to help

It does come pretty close but doesn't touch 👍

I've got no pointers there mate, as you saw mine wasnt crazy tight, I also used a 3/8 drive. Maybe take the bike for a spin and get the head nice and warm and try again.

I bought it off eBay. But it's the A1 cycles oil pressure gauge

Permatex High Performance Thread Sealant 👍 www.ebay.com.au/p/19012042923?iid=152600677419&chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=152600677419&targetid=920064925573&device=m&mktype=pla&googleloc=9047628&poi=&campaignid=10758176796&mkgroupid=104422828445&rlsatarget=aud-786643580846:pla-920064925573&abcId=9800383&merchantid=107329482&gclid=Cj0KCQjwhvf6BRCkARIsAGl1GGgWSPu6Kw-u-fB1HcXeuedhlu-bLs1PN2ptyDiN-R2iw08SV0XkeP8aApyTEALw_wcB

I no longer have the bike and don't know the dimensions sorry.

@@TheGingybeardMan Thanks for response. I’ll call A1 cycles and ask them. Hopefully they will tell me.

I'd go with the loctite 567 high temp sealant.

@@TheGingybeardMan Thanks

Its not required to drain the oil beforehand

Does it ever go past 60? I installed mine and it maxes out past 3500

Check the 5.48 sec mark it's detailed in the vid mate

@@TheGingybeardMan I meant what is your psi when completely heated up. Not what the service manual says it should be.

@@1962egl mine was the same as service manual.

@@TheGingybeardMan mine is too at 2000 rpms. At idle it is zero. After the motor is completely warmed up. Just hard to look at a mechanical oil pressure gauge reading zero at any point with the engine running.

@@1962egl I wouldn't be too worried about that, as long as your showing the required pressure at 2500 revs when warm it shows its getting oil pressure.

No mate it's a 2019

Have you updated the oil pump ?

@@allan9584able no I havnt updated the oil pump. I do believe the 2019 model had a revised oil pump over the 2018. However I've heard they have updated the oil pump again with the 2020 models but not 100% sure on that

Hello . do you remember the code of this accessory? I can not find A thousand thanks

I sold the bike a year ago and it was going great guns then.

@@TheGingybeardMan sweet ! What you ride now brother

@@michaelmaningding now ride a sportsyer 72. I've done loads of vids on the channel turning it into an old school chopper style bike.

🤣🤣🤣🤣 that was pre apocalypse mate

Correct, was a slip of the tounge. Definantly not ft/lbs. As you can see im using an inch/lb torque wrench.

If you have long legs there won't be an issues with it touching your leg. I'm only 5 foot 9 and my leg missed the guage by two inches. I never felt any heat from it.

@@TheGingybeardMan 5’8 but I grip that area pretty hard with my knees

@@jif4639 yeah man, the placement would definitely be an issue for you then

120 inch pounds for the head bolts

The screaming eagle torque cam

Correct, I've already amended that in the first comment you will see on this vid.