Old 1930 Electric Motor (OLD TOOLS RESTORATION)

  Рет қаралды 3,389,132

My Relics

My Relics

3 жыл бұрын

In this video you will see the restoration of a very old electric motor, from what I could find out it is from the year 1930 approximately, below I will leave you a little history about the company that manufactured this emblematic motor.
EMF Dordt is the name by which Willem Smit & Co.'s Electromotorenfabriek Dordrecht became known. This company existed from 1910 to 1977 in Dordrecht, in the Dutch province of South Holland, and the company manufactured electric motors.
History
EMF Dordt originated from the Smit Slikkerveer company and was founded by Willem Benjamin Smit. As the demand for electric motors increased, Smit Slikkerveer began to focus on large, specialty motors and generators. Series production of the most common engines would have to take place in a separate factory and a site for this was found in Dordrecht. Therefore, the company used the name: Smit Dordt as its logo. It was agreed that the engines manufactured in Dordrecht should not exceed 15 hp (11 kW). The largest engines would be manufactured at Slikkerveer.
In 1914 the limit was increased to 18 CV and in 1915 to 30 CV. In 1918, however, the demand for engines over 30 hp was also met and now EMF Dordt became a competitor to Smit Slikkerveer. The company name has now been changed to EMF Dordt. The company grew well. The registered capital (NLG 200,000) already doubled after two years (in 1913) and even increased to NLG 1 million in 1918. At that time it employed 160 people, in 1920 to 180. In addition to the factory (three floors) at Korten Parallelweg, the company also owned a factory building in 's-Gravendeelsedijk (including dyers). The 1920s were reasonably prosperous and the company was not even relatively affected by the economic crisis of the 1930s. In 1933, the Vereenigde IJzerfabrieken electric motor construction department became De Vijf in Doetinchem taken. In mid-1932, the NV Electric Machine Company, abbreviated EMO, was founded as a subsidiary, into which the manufacture of household items such as vacuum cleaners was incorporated. After initial success, it was liquidated again in 1940.
Some links of historical interest:
• Bedrijfsfilm Electromo...
• EMF Dordt 1950

Пікірлер: 3 700
@TheColinChapman
@TheColinChapman 3 жыл бұрын
*manually* rewinding a stator isn‘t only labor work, it‘s an art! my deepest respect for this, including professionally folding the isolation paper. of course, the filling factor in the slots isn‘t professional anymore, and continuous perfomance will have go down without a resin impregnation. but the simple fact that someone manages to rewind a stator is really impressive.
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!
@user-lx1mz7zn4g
@user-lx1mz7zn4g 2 жыл бұрын
Круто
@CraigH999
@CraigH999 2 жыл бұрын
I was thinking the same - hand-winding is a lot of work. Glad to see those skills still exist and that people are willing to share that knowledge and experience.
@Mooncaller95
@Mooncaller95 2 жыл бұрын
When he started doing that my jaw dropped.
@Welphereweareagain
@Welphereweareagain 3 жыл бұрын
Damn son, rewinding a motor is freaking dedication, I watch a lot of restoration blogs. But never have seen that level of perseverance!
@ricstanNZ
@ricstanNZ 3 жыл бұрын
At 12:08 I’d be dead in the water. This is courage and knowledge.
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !!! Se agradece mucho el reconocimiento , saludos !!❤️❤️❤️
@no_more_free_nicks
@no_more_free_nicks 3 жыл бұрын
Rewind is not the easiest thing to do.
@aforman1951
@aforman1951 3 жыл бұрын
Restored more than a few industrial motors. Had a dip tank for degreasing, (#1 cause of motor failure) and an oven for baking the varnish. I let the motor shop do the rewinding....
@roborton1
@roborton1 3 жыл бұрын
totally agree 👍
@nubedigital
@nubedigital 2 жыл бұрын
Gran trabajo!!! Las herramientas antiguas merecen ser recordadas con dignidad, sin ellas no existirían las actuales
@myrelics1
@myrelics1 2 жыл бұрын
muchas gracias !! estoy de acuerdo !
@josephking6515
@josephking6515 2 жыл бұрын
I have enough trouble washing behind my ears. That sir is a work of art and very impressive. The worked who originally built that motor 90 years ago would think it just came from the factory. Very well done. 👏👏👏👏
@myrelics1
@myrelics1 2 жыл бұрын
thanks !!
@MrSanmanbob
@MrSanmanbob 3 жыл бұрын
Rewiring the motor, few would have gone that far, and few would know how. EXCELLENT WORK . PERIOD !
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!
@magaliichazo4519
@magaliichazo4519 Жыл бұрын
Ese motor o bomba hoy tiene 92años ya de uso....y esta como de fabrica..exelente.best work... **********
@hhhhxxxxtt457
@hhhhxxxxtt457 2 жыл бұрын
Admirable mi hermano, con tan sólo escuchar: problemas en el embobinado, todos rechazarían el trabajo.
@myrelics1
@myrelics1 2 жыл бұрын
Muchas gracias !! Ese motor no fue tarea fácil !
@JustWasted3HoursHere
@JustWasted3HoursHere 2 жыл бұрын
Making new windings for an electric motor is not for the faint of heart. Much respect! It's amazing how little electric motors have changed in over 80 years.
@myrelics1
@myrelics1 2 жыл бұрын
thanks !!!
@antoniopinto8551
@antoniopinto8551 3 жыл бұрын
Madre mía que valor tienes, ya casi no quedan bobinadores profesionales, cuando te dio corto pensé que lo ibas a dejar como objeto decorativo. Es un trabajo increíble. Un saludo
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias! Antonio , merecia la pena repararlo , este motor tiene mucha historia !
@rojeliogonzales8771
@rojeliogonzales8771 3 жыл бұрын
Que buen trabajo solo un detalle que no pudiste arreglar .y es la velocidad el motor esta muy lento .
@noventa-doscientos-diez
@noventa-doscientos-diez 3 жыл бұрын
Es de 4 polos 😂... no de 2
@antonioparra4979
@antonioparra4979 3 жыл бұрын
estos fueron mis mejores 27 minutos.... que gran trabajo señor Dios lo bendiga por su inteligencia mil gracias por compartir sus momentos.
@myrelics1
@myrelics1 3 жыл бұрын
Hola Antonio mil gracias a ti por verlo y por tus comentarios, un abrazo !
@marcellomastrostefano5497
@marcellomastrostefano5497 2 жыл бұрын
¡Usted es un Dios! Gracias desde Suiza.
@myrelics1
@myrelics1 2 жыл бұрын
Muchas gracias Marcelo !! Todavía me queda mucho que aprender y ni mucho menos soy un dios 😂😂 pero se agradece mucho tu comentario ❤️
@Kakka666712
@Kakka666712 2 жыл бұрын
Not sure you will receive this, but... I believe the maker would wheep tears of joy, seeing how his motor was restored. But, for the stator [or any windings] heat the whole thing up in an oven to ~120° - dip in varnish & leave in for around 20-30sec - take out and place back in oven as the whole thing cools down. Alternate - place in vacuum flask with varnish - take out and bake in oven at ~120° You need the varnish to penetrate and hold the wires firmly in place as the motor starting torque is applied to them. Otherwise, as the wires move, they will rub off their own [intrinsic] varnish and short out. Awsome video. Thank you.
@myrelics1
@myrelics1 2 жыл бұрын
Gracias !!
@jl3390
@jl3390 3 жыл бұрын
10:30: OMG, is he gonna rewind the stator?? YES!!! YOU ABSO-FREAKING-LUTELY ROCK!!!
@myrelics1
@myrelics1 3 жыл бұрын
🤣😂 Thanks !!
@thitimainthong1252
@thitimainthong1252 3 жыл бұрын
จะใช่4:00
@tonychavez889
@tonychavez889 3 жыл бұрын
Alguien más piensa que debería tener premio Nobel de paciencia y sabiduría ?
@myrelics1
@myrelics1 3 жыл бұрын
Gracias Toni !! No me considero un erudito , solo un hombre más de la tierra que aprende todos los días algo nuevo y le gusta aprender , saludos
@Siporsteven
@Siporsteven 3 жыл бұрын
Paciencia y orden porque a mi se me hubiese perdido todos los tornillos 😂 y un par hubiesen sobrado.
@gokhanyesilkbrs4364
@gokhanyesilkbrs4364 2 жыл бұрын
what an excellent effort. most people after checking and seeing is a short circuit would have bought a new one. Congratulations
@myrelics1
@myrelics1 2 жыл бұрын
Thanks you sou much!!
@SERINTHETUBE
@SERINTHETUBE 2 жыл бұрын
La verdadera nunca había visto restauraciones a este nivel y tampoco nunca había visto como se hacía un bobinado. Cuando vi 27 minutos pensé en seguir de largo pero la verdad que valió cada segundo. Mis respetos hacía su inmensa sabiduría. Saludos desde Argentina.
@myrelics1
@myrelics1 2 жыл бұрын
Muchas gracias Sergio !!! Saludos !!
@knzmicmx
@knzmicmx 3 жыл бұрын
Hola, muchos de los canales que he visto dónde se maneja este mismo tipo de contenido tienden a ser en cualquier idioma menos en español, me da felicidad saber que existe un lugar donde una persona hispano parlante está generando este tipo de contenido y lo más importante, saber que el resultado final es bueno y visiblemente llamativo. Felicidades sigue así!
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Ricardo !! Estoy muy contento con la aceptación que está teniendo el canal , seguiré subien contenido !!
@Pedro.P.1962
@Pedro.P.1962 3 жыл бұрын
También me alegro que hablemos en español....se agradece.
@ARCANTO0416
@ARCANTO0416 3 жыл бұрын
y no solo eso, es mas pulcro que muchos canales que he visto, mas detallista.
@elladar2
@elladar2 3 жыл бұрын
O aprender inglés...¿No? XD
@veralux8613
@veralux8613 3 жыл бұрын
@@myrelics1 para qué se usaban estos motores? Estoy gratamente sorprendida de ver la excelente restauración!!
@alejandrom5347
@alejandrom5347 3 жыл бұрын
Mi compa usted ha dejado en pañales a un mago, qué trabajo tan pulcro y detallado. Usted raya la perfección. Gracias por su contenido. Tiene usted el conocimiento de punta. Mis respetos
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias a ti Alejandro !! por ver el video y este gran comentario , me anima mucho a seguir dando lo mejor de mi
@alejandrom5347
@alejandrom5347 3 жыл бұрын
@@myrelics1 No, no, un gusto poder disfrutar de tan valioso contenido. Quiero atreverme a hacerle una petición, tengo un motor trífasico, qué era de una bomba de agua marca pedrolo, el motor quedó sin la parte de realizar el sistema de agua, es posible que usted pudiera realizar un proyecto de instalación y puesta en marcha para un esmeril? Mi primer pensado era poder hacer un molino de café, pero al no tener tantas herramientas, creo quedarme en el esmeril. Quisiera poder recibir ese conocimiento de instalación de ese motor. Gracias de antemano
@myrelics1
@myrelics1 3 жыл бұрын
@@alejandrom5347 tienes que infórmate de las revoluciones a las que trabaja ese motor los de bombas de agua suelen tener mas fuerza que velocidad y para un esmeril necesitas bastante velocidad
@simonerenai4753
@simonerenai4753 3 жыл бұрын
Finalmente qualcuno che ricostruisce anche le spire del motore, e include anche la storia della società che lo ha prodotto. Bene un vero recupero storico. Bravo
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !!!❤️
@VladimirPankov
@VladimirPankov 3 жыл бұрын
Очень интересное занятие ! И полезное !!! Как в прошлом побывал...
@josephtudino508
@josephtudino508 3 жыл бұрын
I know nothing about motors.... But loved watching you restore it
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Josep !! Me alegro mucho que te guste !!
@Steven_Rowe
@Steven_Rowe 3 жыл бұрын
How nice to see something like this passionately restored . It looks brilliant and from a day and age before the throne away age . It exudes quality
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!!
@lukevader3234
@lukevader3234 3 жыл бұрын
To restore this motor from the 30's like new makes you the GOAT at what you do.... Bravo.
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much !!!!!
@begzodshoqulov6523
@begzodshoqulov6523 2 жыл бұрын
,👍👍👍👍👍👍👍👍👍👍👍👍👍 juda ajoyip ish sanat darajasida. Very goood
@edisonelias6797
@edisonelias6797 3 жыл бұрын
Espetacular!! Motor cm enrrolamento primário e secundário lig/ em série pelo tempo, progeto genial. Palmas para os gênios da Eletricidade!!!
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Edison !!
@poorchava
@poorchava 3 жыл бұрын
Holy shit... I'm pretty sure this is the first restoration video on YT where the totally abused and destroyed tool doesn't magically have intact windings... Good job!
@myrelics1
@myrelics1 3 жыл бұрын
😂 Thanks !!
@webmastercaribou7570
@webmastercaribou7570 3 жыл бұрын
Beautiful restoration, i love when old classics are saved. They don't make them like they used to.
@myrelics1
@myrelics1 3 жыл бұрын
muchas gracias
@philipmcdonagh1094
@philipmcdonagh1094 2 жыл бұрын
Would I be right in guessing its an induction motor, never seen an armature/brushes like that, I thought I had patience. Man your in a different league. Patience of a saint springs to mind.
@NeonfOxa
@NeonfOxa 2 жыл бұрын
You are correct however this doesn't have an armature (windings on rotor) or brushes, it has stator instead (outside winding). the part that looks like brushes is a switch that turns off the capacitor (used to kind of kick start the motor) once its up to speed (weights go flying out at set speed, disconnecting from the rings and cutting the circuit).. hope that was the information you was looking for :)
@kelvintovar132
@kelvintovar132 3 жыл бұрын
Lo mejor es que no colocaron uns fastidiosa música de fondo, muchas gracias de verdad por eso.
@myrelics1
@myrelics1 3 жыл бұрын
De nada! gracias a ti por verlo !
@antoniodivino28
@antoniodivino28 3 жыл бұрын
Exato amigo é pessimo vidios com músicas de fundo principalmente musicas de malandros .
@meekbaker1572
@meekbaker1572 3 жыл бұрын
Йлмщхл
@JuanAntio-Oz
@JuanAntio-Oz 3 жыл бұрын
Un mexicano vio este video 🇲🇽✌😁
@myrelics1
@myrelics1 3 жыл бұрын
@@JuanAntio-Oz A un español le gusta eso !!😁
@leonardoflores9306
@leonardoflores9306 3 жыл бұрын
Un trabajo realizado por un experto... El embobinado es complejo y la restauración de todo el motor... 👍, Excelente trabajo de pintura. FELICITACIONES 🇲🇽
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Leonardo , no fue una restauración sencilla pero mereció la pena , me alegro de que te guste !
@patriciapascual1878
@patriciapascual1878 2 жыл бұрын
😱😱😱Me relajo esa concentración
@myrelics1
@myrelics1 2 жыл бұрын
me alegra que te relaje !!
@robertocatuara4496
@robertocatuara4496 2 жыл бұрын
Artista. Súper. Top 10.
@MistahMatzah
@MistahMatzah 3 жыл бұрын
When I saw what he was restoring i said to myself, "If he winds new coils I'm going to go insane." So I'm insane now, thanks.
@myrelics1
@myrelics1 3 жыл бұрын
😂🤣🤣 thank you very much !!❤️
@mustafahalukyilmaz102
@mustafahalukyilmaz102 3 жыл бұрын
When i saw re-winding im impressed. I have never imagine it from the beggining of the restoration. If i were u i was already done with the restoration when i get short from stator. Amazing job
@myrelics1
@myrelics1 3 жыл бұрын
Thanks you very much!!!
@crutecox3364
@crutecox3364 2 жыл бұрын
Goodness, gracious, Absolute Transformation 💯
@stanisawk1385
@stanisawk1385 2 жыл бұрын
Bravo, bravissimo !!!!!!! Maestro
@alejo4921
@alejo4921 3 жыл бұрын
el conocimiento es poder....!!! me viene a la cabeza esta frase, después de ver semejante restauración. Saludos desde Argentina.
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Alejandro ! un abrazo fuerte para Argentina !!
@waldorfvonmuppet7399
@waldorfvonmuppet7399 3 жыл бұрын
Perfect - a absolute Top Job There are very few on YT who get it managed, to rewire a magnet core - a real joy to watch, thank you 🙏
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much for watching the video and commenting, the truth is that it was not easy, but being such an old engine it was worth bringing it back to life
@daniellegault4758
@daniellegault4758 2 жыл бұрын
At first, it looked impossible indeed! Great work! Wow! for the finished product!
@myrelics1
@myrelics1 2 жыл бұрын
Thanks !!!!
@leilamonteiroduartedias7244
@leilamonteiroduartedias7244 2 жыл бұрын
Esse Restaurador é um gênio. Parabéns pelo seu trabalho
@Brunomorales5497
@Brunomorales5497 3 жыл бұрын
Woooow, nunca pensé que todavía hubiera alguien que hiciera rebobinado. Me quedé impresionado.
@myrelics1
@myrelics1 3 жыл бұрын
Gracias ! yo es la primera vez que lo hago ...
@Alakarr
@Alakarr 3 жыл бұрын
That was impressive! I've watched alot of restoration videos, but this is the first time I've seen someone rewind an electric motor. Well done.
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much !!!
@marcusr0y
@marcusr0y 2 жыл бұрын
sí, muy bien, sin embargo, no empacaste esos rodamientos correctamente, por lo tanto, se quemarán rápidamente. debe desarmar y empacar la grasa correctamente. yes, very nice, however, you did not pack those bearings properly, therefore, they will burn up quickly. you need to take back apart and pack the grease properly.
@berserker1969
@berserker1969 3 жыл бұрын
Bobinar un motor .....la leche.El like no se te puede negar.Vaya trabajazo.Felicidades y un saludo envidioso.
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !!! Veo que has visto ya casi todos los vídeos del canal ! Me alegra mucho que te gusten !!Un saludo !!!
@mariateresasuarez4639
@mariateresasuarez4639 2 жыл бұрын
Soy un amante de las restauraciones y me gustó mucho revivir ese viejo pero inigualable motor un saludo desde Colombia
@myrelics1
@myrelics1 2 жыл бұрын
Saludos !!! Me alegro de que te gustase !!
@dfbess
@dfbess 3 жыл бұрын
The craftsmanship and dedication you put into rebuilding this motor is admirable.. kudos..
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!!
@enochpowel3030
@enochpowel3030 2 жыл бұрын
Best restoration I've seen in a long time.
@myrelics1
@myrelics1 2 жыл бұрын
Thanks !!!!
@john126265
@john126265 2 жыл бұрын
Thank you for clean and good job God bless you
@pedrolandron4035
@pedrolandron4035 3 жыл бұрын
Fantastico quedó de show,lo felicito
@myrelics1
@myrelics1 3 жыл бұрын
Gracias !!!
@xMrsmileyfacex
@xMrsmileyfacex 2 жыл бұрын
My hat is off to you man! Rewiring an electric stator is no small feat. Awesome just awesome. The entire resto was just beautiful. Congrats!
@raulsoria3083
@raulsoria3083 2 жыл бұрын
Grande colega yo tengo mucho trabajo que no tengo tiempo de pintarlos y todavía bobino motores de bombas marelli que tienen 60 años y siguen prestando servicio felicitaciones!
@myrelics1
@myrelics1 2 жыл бұрын
Gracias !!
@jorgevalenzuela6687
@jorgevalenzuela6687 2 жыл бұрын
Impecable restauración !!!
@cabman86
@cabman86 Жыл бұрын
What an amazing job rewinding the armature.
@myrelics1
@myrelics1 Жыл бұрын
thanks !!
@ethelryan257
@ethelryan257 3 жыл бұрын
Why do I have the feeling this guy can do just about anything? I'm impressed.
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!
@Johnconno
@Johnconno 3 жыл бұрын
Perhaps you are not so good with your hands? Maybe? 👌
@ivanzanin4526
@ivanzanin4526 2 жыл бұрын
Отличная работа!!! Глаз радуется
@blackisblack22
@blackisblack22 2 жыл бұрын
Espectacular!
@LalinGP
@LalinGP 3 жыл бұрын
Hermoso !!! Bello !!! Me hizo acordar a mi infancia con un padre industrial maderero. De niño me crié entre motores y aserrín, por unos céntimos, motor quemado, debía limpiarlo y dejarlo libre de toda suciedad. Ya más grande me encargaba de armar las bobinas, renovar el papel prespan (aislante) y dejarlo en condiciones de armarlo. Hice el secundario dentro del área de la madera. Al momento de elegir una carrera universitaria opté por la informática, lo que me alejó de todo ese mundo. A veces siento nostalgia ya sea por sentir el aroma del aserrín o ver un motor eléctrico que no funciona. Handsome !!! Beautiful !!! It reminded me of my childhood with a lumber industrial father. As a child I grew up between engines and sawdust, for a few pennies, every burned engine I had to clean it and leave it free of all dirt. When I was older, I was in charge of assembling the coils, renewing the prespan (insulating) paper and leaving it ready to assemble. I did the secondary within the wood area. When choosing a university degree, I opted for computer science, which took me away from all that world. Sometimes I feel nostalgic either for the smell of sawdust or to see an electric motor not working.
@myrelics1
@myrelics1 3 жыл бұрын
Estoy muy contento de que te gustase el vídeo , y muchas gracias por compartir esta historia de tu vida , saludos !!!
@iron0722
@iron0722 3 жыл бұрын
Шикарно! Как можно поставить 1000 лайков сразу за такую работу?))))
@myrelics1
@myrelics1 3 жыл бұрын
благодаря
@pupi149
@pupi149 3 жыл бұрын
Felicitaciones por tu dedicación y por el resultado final!!! Te quedó hermoso y eso del bobinado fue una belleza.
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !!
@usuarioandroid2898
@usuarioandroid2898 Жыл бұрын
Excelente vídeo, el que sabe sabe.
@juanmanuelnogueira5297
@juanmanuelnogueira5297 3 жыл бұрын
alucinante!!
@user-uw5ry5wm1i
@user-uw5ry5wm1i 3 жыл бұрын
I admire you so much, because you even reprocessed the winding! Looking forward to more of your works!
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias ! Seguiré subiendo videos para ti
@edwinandrewartha3351
@edwinandrewartha3351 2 жыл бұрын
(30/10/21) Sin palabras. señor, usted es un genio. He quedado sin palabras al ver a este eximio mecanico, al desarmar ese motor en estado fosilizado y después armarlo con tanta prolijidad. Desde Chile 🇨🇱, le envío mis felicitaciones, asombrado por la prolijidad exhibida. Un fuerte abrazo.
@myrelics1
@myrelics1 2 жыл бұрын
Muchas gracias Edwin !!!
@nancyveron3241
@nancyveron3241 3 жыл бұрын
Una maravilla!! 👏🏻👏🏻👏🏻
@albertocubilla6242
@albertocubilla6242 2 жыл бұрын
Ese hombre no tiene límite es un Hagel como sabes dios mío exitos en tu vida gracias mi reperto
@myrelics1
@myrelics1 2 жыл бұрын
Gracias !!
@albertocubilla6242
@albertocubilla6242 2 жыл бұрын
@@myrelics1 personas como usted son poco sacar las piezas del hovido y trajeras a la vida eseo tiene un nombre reperto gracias exitos en tu vida mil gracias
@MultiNForce
@MultiNForce 2 жыл бұрын
Sin lugar a duda lo artesanal convertido en restauración, te quedó perfecto
@rtube111
@rtube111 3 жыл бұрын
Uma restauração de engenharia que eu sem dúvida considero uma obra de arte. Maravilhoso o trabalho.
@myrelics1
@myrelics1 3 жыл бұрын
Muito obrigado !!!
@joseboaventura4968
@joseboaventura4968 2 жыл бұрын
Parabéns, que espetáculo.
@carlosnavarro532
@carlosnavarro532 2 жыл бұрын
eres un máquina....recablear el motor, pintar, desmontar, volver a montar....que crack!!
@myrelics1
@myrelics1 2 жыл бұрын
Gracias Carlos !!
@JungleYT
@JungleYT 3 жыл бұрын
Amazing, the amount of craftsmanship and engineering for such an old motor... Thanks for the detailed and well written history. So RARE these daze!
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much !!!
@ljkkj2511
@ljkkj2511 3 жыл бұрын
No me esperaba el rebobinado, increíble trabajo!
@myrelics1
@myrelics1 3 жыл бұрын
Gracias Ref Jim !!
@arturovasquez9720
@arturovasquez9720 3 жыл бұрын
Arte puro. Sin palabras.
@myrelics1
@myrelics1 3 жыл бұрын
Gracias Arturo ! Todo un alago que lo consideres arte !! Saludos !!
@forhumanity1691
@forhumanity1691 2 жыл бұрын
Ready for again till..year2130.. wow..bro you have golden hands.. Big fan of your... Luv from india...
@myrelics1
@myrelics1 2 жыл бұрын
Thanks !!
@RodrigoVolta
@RodrigoVolta 3 жыл бұрын
This engine was wonderful. A beautiful piece. To put on top of the living room bookcase. Congratulations!!
@myrelics1
@myrelics1 3 жыл бұрын
THANKS !
@cicerobezerra7982
@cicerobezerra7982 3 жыл бұрын
Tô surpreso, impressionado com tanta inteligência,, parabéns ficou perfeito..
@myrelics1
@myrelics1 3 жыл бұрын
Muito obrigado !!
@user-ib8jb2dh9n
@user-ib8jb2dh9n 2 жыл бұрын
عمل في غاية الروعة والاتقان .
@stalkson
@stalkson 3 жыл бұрын
Excellent job, perfect restoration,
@enriquecobos2925
@enriquecobos2925 3 жыл бұрын
Mis respetos señor electrico el que sabe lo demuestra Arte en las manos Saludos desde Guayaquil Ecuador
@myrelics1
@myrelics1 3 жыл бұрын
Gracias Enrique , saludos !!
@marcelovaldesd
@marcelovaldesd 2 жыл бұрын
Excelente trabajo, quede impresionado con el cambio y a su vez que funcionó de maravillas. Felicitaciones 👏🏻👏🏻👏🏻👏🏻👏🏻
@myrelics1
@myrelics1 2 жыл бұрын
muchas gracias !!
@dudy8736
@dudy8736 2 жыл бұрын
Digno de admiración !!
@riquelmesorbete6019
@riquelmesorbete6019 3 жыл бұрын
*PRECIOSO TRABAJO!*
@billmorris2613
@billmorris2613 3 жыл бұрын
Great restoration.
@kelvintovar132
@kelvintovar132 3 жыл бұрын
The best thing about the reconstruction video, it's the music, there's not back music, thank you so much guys 🙏🙏🙏
@myrelics1
@myrelics1 3 жыл бұрын
Thanks!
@kanagarajaboblancer4731
@kanagarajaboblancer4731 2 жыл бұрын
Wow great invention 1930
@robotempire
@robotempire 2 жыл бұрын
Buen trabajo! Disfruté tu vídeo, gracias. Tu paciencia con los wires es más que pude haber hecho.
@CarlosC271
@CarlosC271 2 жыл бұрын
jaja que bárbaro; la carcasa del motor es ¡una placa" de 1/2" de grosor aproximadamente;nada que ver con la simple lámina de 3/16" de las carcasas de la actualidad. Conocimiento y capacidad del experto para reparar un "dinosaurio" de los motores eléctricos;construyendo un nuevo devanado; lo increíble que pudo encontrar los rodamientos ¡91 años despues!;no cabe duda que antes las cosas se fabricaban para durar. Felicitaciones al experto,es un maestro de maestros. Saludos.
@myrelics1
@myrelics1 2 жыл бұрын
muchas gracias !! la verdad es que esas carcasas pesaban una barbaridad !!
@andresfga87
@andresfga87 3 жыл бұрын
Impresionante, se merecía dos partes el video, muchisimo trabajo, y además trabajo fino
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias Andrés !
@JoseManuel-vm7zd
@JoseManuel-vm7zd 3 жыл бұрын
Bien en la,rebobinada y el color verde hoja quedó perfecto!!👍
@myrelics1
@myrelics1 3 жыл бұрын
Gracias !!!
@mariom7949
@mariom7949 2 жыл бұрын
Beautiful. You have inspired me to change a lightbulb in the basement.
@myrelics1
@myrelics1 2 жыл бұрын
😂
@hectorlao8604
@hectorlao8604 3 жыл бұрын
Nice that you know the history of the things you're restoring. EXCELLENT BRO!
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !! Me gusta mucho investigar un poco de lo que estoy restaurando ..
@OverbuiltByHenry
@OverbuiltByHenry 3 жыл бұрын
He trabajado en un taller de reparación y mantenimiento de motores eléctricos y lo que sólo te ha faltado ha sido equilibrar el rotor 😂, es coña; cuando he visto cortocircuito no me esperaba que lo fueses a rebobinar! Muy buena restauración, ha quedado de 10 y además va muy fino. PD. Los motores de hoy en día no son como los que se fabricaban antiguamente, esos eran casi a prueba de bombas y con un buen mantenimiento lo que llegan a durar...
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !! te puedo decir sobre el que pesa por lo menos 30 k hasta las tapas son piezas macizas de acero , los hacían para durar toda la vida .
@HansOvervoorde
@HansOvervoorde 3 жыл бұрын
That rewiring is so very, very impressive! When all old wiring was removed, I was like so now what... Well, you rewired, wow!
@myrelics1
@myrelics1 3 жыл бұрын
Thank you very much!!!
@MiguelGonzalez-sj4ty
@MiguelGonzalez-sj4ty 3 жыл бұрын
Simplemente un maestro gracias por compartir sus conocimientos
@myrelics1
@myrelics1 3 жыл бұрын
Gracias a ti Miguel !!!
@tylerpetry5567
@tylerpetry5567 3 жыл бұрын
Holy smokes for the skill and maybe more impressively the patience! 👍
@347573
@347573 3 жыл бұрын
Wow, this is a masterpiece restoration!
@myrelics1
@myrelics1 3 жыл бұрын
Thanks !!!!
@michaellapointe6727
@michaellapointe6727 2 жыл бұрын
Outstanding and awsome restoration
@freddymartinez6469
@freddymartinez6469 2 жыл бұрын
Mis respetos, sea de 1930 o del 2000, es un trabajo extraordinario. Sos "UN MOUSTRO"..Espero ver un proximo trabajo..👍👍👍💯
@myrelics1
@myrelics1 2 жыл бұрын
Gracias !!
@estevaofelix83
@estevaofelix83 3 жыл бұрын
Trabalho perfeito! Um mestre da restauração.
@myrelics1
@myrelics1 3 жыл бұрын
Muito obrigado !!
@Vamos_a_Hacerlo
@Vamos_a_Hacerlo 3 жыл бұрын
Increíble la transformación. Muy buen trabajo
@myrelics1
@myrelics1 3 жыл бұрын
Muchas gracias !!
@johnjacobs8568
@johnjacobs8568 Жыл бұрын
Wow! Off the chain stunning work!
@myrelics1
@myrelics1 Жыл бұрын
Thank you so much !!!
@user-io2rm7bb6d
@user-io2rm7bb6d 2 жыл бұрын
wonderful job! it was nice to watch this restoration!
@myrelics1
@myrelics1 2 жыл бұрын
Thanks !!
Restoration of Old Blacksmith Anvil
29:04
My Relics
Рет қаралды 1 МЛН
3 wheeler new bike fitting
00:19
Ruhul Shorts
Рет қаралды 48 МЛН
OMG😳 #tiktok #shorts #potapova_blog
00:58
Potapova_blog
Рет қаралды 3,5 МЛН
The day of the sea 🌊 🤣❤️ #demariki
00:22
Demariki
Рет қаралды 79 МЛН
1920s Maytag Washing Machine Engine [Restoration]
45:10
Hand Tool Rescue
Рет қаралды 8 МЛН
Restoration RUSTY Motorcycle - Half Year in 38 Mins
37:32
Crazy Restoration
Рет қаралды 8 МЛН
CITROEN 2CV  | RESTAURACIÓN COMPLETA
19:00
Tempa clásicos
Рет қаралды 263 М.
Restoration of an Old Rusty Typewriter (Remington)
29:07
MY RESTORATIONS
Рет қаралды 467 М.
Full Restoration - Victor Victrola Record Player from 1917
23:28
BOM Reviews
Рет қаралды 58 М.
Restoration the Miter Saw I bought for $10
34:53
Restoration VS
Рет қаралды 2 МЛН
Restoration calendar
22:19
PSV Restoration
Рет қаралды 519 М.
Amazing restoration of a very old coffee grinder FROM 1855 !!
35:36
3 wheeler new bike fitting
00:19
Ruhul Shorts
Рет қаралды 48 МЛН