Old Craftsman Pressure Washer Pump Broke! Let's Replace It!

Рет қаралды 76,840

7 жыл бұрын

Response Video to this Video: Old Craftsman Pressure Washer Pump Repair! Will It Work?
kzfaq.info/get/bejne/ib19pNFqtrWbXWg.html
Today we replace the pump that was repaired somewhat successfully in the previous video. Unfortunately, not long after repairing it, The pump did in fact fail. So we are installing and testing a Universal I obtained online in the hopes if will bring this old pressure washer back to life. We also go over some of the accessories I picked out to help me around the house.
Please subscribe if you would like to see more repairs like this!
Like my content? Donate to the cause!
Paypal: paypal.me/JungleKing007
Coinbase: @JungleKing007
Project Materials:
- Craftsman Pressure Washer - Model# 580.768310
- Failed Pressure Washer Pump Assembly - P/N B3468A
Replacement Universal Water Pump: Ebay
- Annovi Reverberi SRMW2.2G26-EZ SX Replacement Pump
Upgrade 2600 PSI - Vertical S
Replacement Keyway/Keystock for AR pumps - EBay
- Search " Key Stock to Fit RMW2.2G24 RMW2G24 AR Pumps"
- Or check with local small engine shop, 3/16" key
Pressure Washer Hose:
- Power Care 1/4" x 25' Hose - Model # 40240 - Home Depot
- Flexzilla 5/16" x 50' Hose - Model# HFZPW3550M-3X - Menards
Pressure Washer Gun:
- Blue Hawk 4200 PSI Spray Gun - Model# SGY-PWA57 - Lowes
Misc Accessories:
- Karcher Pivot Nozzle - Model # 8.756-103.0 - Home Depot
- Briggs & Stratton Turbo Nozzle - Model# 6195 - Menards
- DUSICHIN Foam Cannon and Spray gun Combo Model # DUS-006 - Amazon www.amazon.com/DUSICHIN-DUS-006-Pressure-Washer-Thread/dp/B01M7QBP99/ref=sr_1_1?s=lawn-garden&ie=UTF8&qid=1497963006&sr=1-1&keywords=DUSICHIN+DUS-006
Music: Sthlm Sunset
Music by Ehrling
open.spotify.com/artist/5wo7dlNLNdFmaaU7NTtdoT
kzfaq.info/love/kXVou-i0Qm-L1DYVQE9BEwfeatured
soundcloud.com/ehrling
Music promoted by Audio Library kzfaq.info/get/bejne/a9aki6yXzbvWhHU.html
---------------------------------
Disclaimer:
I am not a certified mechanic. These videos are for entertainment and informational purposes only. should you decide to perform the tasks outlined in this video, you do so at your own risk.

Пікірлер: 55

@lonthrall5613 3 жыл бұрын

...And here we are after watching the first video about this machine. Thanks for all the part numbers and mods to mount the new pump!

@user-kh7on9nr6g Ай бұрын

Thank you! You saved me. I did what you did. I found at ACE automotive double thread studs threaded into the engine. My only concern is the new pump is not flush with the feet so there is a space between the deck bottom and input to the pump. My cost- Amazon pump $90. ACE hardware $35. (3x = 1 stud, 2 nuts, 1 lock washer, 2 washers, 1 rubber washer) new spark plug and oil $12.

@malcolmzoll7613 Жыл бұрын

Great information 👍

@gergemall 4 жыл бұрын

Nice job

@Fakeus 7 жыл бұрын

thanks

@adamanderson4703 3 жыл бұрын

Awesome

@abw121 2 жыл бұрын

For anyone trying this upgrade. Try removing the sleeves on the original mounting bolts. Grab them with pliers and start spinning them off. This way no need for new mounting bolts. Not to mention one of my bolts is a blind hole so dropping the bolt thru engine was impossible. My new pump mounted up without these sleeves and the original bolts worked fine. You will need the 3/16 key to match the crankshaft into the pump.

@raymundmanuel7760 3 жыл бұрын

Great Video! Does this pump have a pressure unloader valve? I have the exact same pressure washer but the motor dies when I let off the trigger. Any suggestions?

@davidstrohm5918 4 жыл бұрын

i wish i had that for parts i need thar big black plug got a good pump but dont have that .love the info though.

@davidstrohm5918 4 жыл бұрын

i buy all those old pumps .things like that black plug are hard to find even the unloader.

@Fakeus 7 жыл бұрын

i got a craftman washer with 2500 psi can i upgrade with a higher psi pump like 2700

@jungleking007Channel 7 жыл бұрын

+Miguel Angel Alvarez I don't see why not. Be sure to check the new pump's motor horsepower range rating to make sure you're not going to overwork the motor. Thanks for watching! Good luck!

@davidbennett1451 5 жыл бұрын

HI THERE I GOT LUCKY WITH A ENGINE AND WASHER BUT ONE OF THE ALUM BRACKETS BROKE FROM THE BOLT UNIT.. I WAS ONLY WONDERING WHAT IT CAN BE...

@Gunman1628 6 жыл бұрын

did those nozzles that came with the foam gun the correct size to work with the pressure washer? mine seem to be way over sized

@jungleking007Channel 6 жыл бұрын

+Whyme123 Are you referring to the colored nozzles? Yes, those came in the kit with the foam gun. Was designed to accept either the spray nozzles or the foam cannon attachment.

@baggins1 4 жыл бұрын

Dang! Tryna get the right depth pump is a crapshoot!

@AdrianoEva 5 жыл бұрын

Did you have to refill the oil that goes inside the upper pump?

@jungleking007Channel 5 жыл бұрын

On the old one, yes. I had previously rebuilt it but the milky oil issue returned indicating seals were bad. The new pump unit was sealed so it did not require any oil.

@rodneyfoust9842 4 жыл бұрын

Prior to installing the new pump, did you have to reuse the old orange seal that sat atop the old pump or was it not required with the new universal pump? Great Video, thanks

@jungleking007Channel 4 жыл бұрын

Did not reuse the seal. new pump was fully self contained. Ready to install out of the box.

@kevinf4862 7 жыл бұрын

JungleKing007, I have the exact same pressure washer (craftsman 580.768310). An old coworker gave it to me last fall when he bought a new electric pressure washer, so I took his hand-me-down and stored it in the corner of my garage. This weekend I thought I'd bust it out and clean a few things up around the yard, but to my dismay I discovered my pump was bad too; all the seals and gaskets were dry rotted. After some research on the 'inter-webs' I too discovered that replacement parts for the stock pump were either astronomically priced or impossible to find. While doing my googling I stumbled upon your video, so I think I'm going to follow your lead and replace the pump with the exact pump as you did (at least I know it will work) and hopefully I'll be back in business. I do have one question though; what crankshaft adapter key did you use, and where did you buy it? You didn't mention where you got it in the video, nor do I see it listed in the description with the other project materials... If I get the pump, crankshaft key, and mounting hardware, I should be all set. Thanks in advance! Also, your videos were very helpful, thanks for sharing!

@jungleking007Channel 7 жыл бұрын

I apologize, will be updating the description shortly. bought the key off Ebay, search "Key Stock to Fit RMW2.2G24 RMW2G24 AR Pumps." Think it was $4 total. You may also check your local small engine repair shop. The keyway/keystock should be a standard size fit for most vertical shaft motors, 3/16" . Thanks for watching, and good luck!

@KingsDisasterGarage 6 жыл бұрын

Great video I have a newer craftsman I lent it to a family member and he cross threaded the outlet of the pump is there a way to change just that out or do I need to replace the whole pump

@jungleking007Channel 6 жыл бұрын

It may depend on the water pump assembly. If parts are available, I'm sure the outlet pipe would be out there. Check for part numbers on the pump itself and/or see if you can look up the manufacturer. Good Luck! Thank you for watching!

@floridagirl9064 2 жыл бұрын

Probably need a new head unit

@jayswisher575 4 жыл бұрын

Check the knob on the foam cannon. It should be all the way negative

@abimariavargas7086 Жыл бұрын

How much oil did u put on old pump ..

@3rdzehe 2 жыл бұрын

How many Hp is your pressure washer's engine?

@ricardocruz27 6 жыл бұрын

Great video were can buy that pump you use on your the unit and how much you pay?

@jungleking007Channel 6 жыл бұрын

Check the description for pump information. Bought new pump off EBay. Think I paid about $120 for it.

@moecapitolnetwork2916 4 жыл бұрын

Where did you get that shaft key? Store, part number?

@jungleking007Channel 4 жыл бұрын

EBay, check the description for the search term I used

@moecapitolnetwork2916 4 жыл бұрын

@@jungleking007Channel Sounds good thanks much

@carolynrayborn3050 2 жыл бұрын

Pump won't come off after removing bolts...why?

@jungleking007Channel 2 жыл бұрын

Could be fused to the drive shaft? That is one possibility

@mastersergeant8672 4 жыл бұрын

Where did you get the replacement pump?

@jungleking007Channel 4 жыл бұрын

Ebay, video description has the info

@mastersergeant8672 4 жыл бұрын

@@jungleking007Channel got one ordered.

@mazman8343 5 жыл бұрын

Hi friend where can I get that pump

@jungleking007Channel 5 жыл бұрын

I bought mine on Ebay. Check the description for information on what to search.

@walterrojas1075 2 жыл бұрын

So my craftsman pressure washer comes with the newer pump you’re using. I watched your other video and used it as guide to pull apart the pump and check out the inside. It started working again but not 100% like before. I bought the pressure washer used for $120 three years ago, the pump cost $110 now. Question is, do I buy a new pump and hope it last, dish out a few more bucks ($140) to buy an electric pressure washer and not worry about carb gumming up or just dish out the $200 for a decent gasser? Decisions… decisions….

@jungleking007Channel 2 жыл бұрын

Depends on the pressures you need and how often you will use it. Mine still works to this day but I do find the gasser is a bit bulky some times to use. Electric units fit most home uses, and are pretty reliable as long as they are correctly maintained. Personal preference at this point. I have no intention to going to an electric one myself until my gas unit breaks completely.

@walterrojas1075 2 жыл бұрын

@@jungleking007Channel I ended up picking up a $100 Greenworks 1700 PSI pressure washer. Let my brother in law borrow the gasser. Just forgot to grab my good hose and quick connect attachments. Figure the electric for washing the cars and gasser for driveways and siding.

@johnjobber2219 2 жыл бұрын

Did you need to put oil in it?

@jungleking007Channel 2 жыл бұрын

Not the new one. It’s a sealed unit.

@jorgecaballero6898 3 жыл бұрын

Link for new pump have the same pressure washer. Just stop working

@jungleking007Channel 3 жыл бұрын

Check the description. I think the link or instructions are still valid

@janmeinecke8266 5 жыл бұрын

Cant believe to see washing a car on street without oil separator and soap water capture. Just lucky that we have so many planets spare after ruining this one...

@Matt-qh8lj 5 жыл бұрын

😂😂 idiot

@NeverEnoughPyro40 5 жыл бұрын

First of all he is in his driveway not the street, Second oil separator, for what does his driveway look stained to you!! And as for the soap most automotive soaps are environmentally friendly AKA NOT HARMFUL! I am sure he pays his taxes so therfore he can use the sewers for his run off! You sound like you are from California, so maybe you should not be on the internet watching videos because you just might get Cancer!

@M70ACARRY 5 жыл бұрын

Oh mer gaw....oil separator.

@DBChevy57 4 жыл бұрын

@@NeverEnoughPyro40 It's about the pollution from the gas engine. I use mine where it is cost effective,decks,fence,house,etc. To wash a car ?? It would be better to go to a car wash that recycles the water. (yes there are ones) Kudos for the video repair.

@dingdongmagee 2 ай бұрын

LOL