Old Rusty SUJIHIKI knife restoration.

Рет қаралды 170,105

Жыл бұрын

Today there is a new addition to my knife collection. This is an old rusty sujihiki knife. If I am not mistaken, it is made in China from Japanese steel. If I'm wrong, I'd be happy to read your opinion in the comments.
In this video I will try to bring it back to life.
My Small Old Rusty Shop - bit.ly/3vtNWMX
The tools I used in the video
Corundum Whetstone Knife Sharpening Stone alii.pub/6h4uh4
Polishing Machine For DIY Woodworking alii.pub/6h4ule
Thank you for watching. I hope you enjoy it. Leave your comments!

Пікірлер: 92

@robertbrandywine 5 ай бұрын

One of the best Japanese knife restoration videos I've seen.

@johnrudy9404 8 ай бұрын

Really brought it back to life. Only really three tools needed in the kitchen, A sharp, good quality knife and your two hands.

@davidtatro7457 Жыл бұрын

Excellent job, especially on the handle.

@Nate65Dawg Жыл бұрын

Came out nicely!

@brenttaylor6395 Жыл бұрын

Very interesting Old Rusty. I was intrigued by several of your techniques but when you attached the handles to the blade I was amazed to see you keep the integrity of the knife by not slathering everything in epoxy and clamping like so many artisans do. I liked the quality and craftmanship of measuring and counter-sinking the Chicago rivets. They look like they will last a life-time. I also noted a very handsome dog in one of your shots found elsewhere on your site. A dog guy is okay in my books! Kudos

@simonboyden7868 Жыл бұрын

Outstanding work absolutely gorgeous and ready for a few more years

@mollyrazormillions Жыл бұрын

Great work. Probably tone down those sharp and loud knife sharpening sounds next time, because it really makes the hair stand up on my back 😶‍🌫

@hobbes2555 Жыл бұрын

when I saw the tiny anvil at 3:05, all I could think of is "who's a big boy? yes you are!"

@amitbhattachariya9357 Жыл бұрын

A beautiful knife is in the making. You are a Genius.

@leongiblin Жыл бұрын

Love these videos so much! Beautiful work.

@derrickcordick1315 Жыл бұрын

Beautiful job love the handle

@mitchmurrell753 Жыл бұрын

Frighteningly sharp. Fabulous turnaround on one that was unusable

@brucevodka Жыл бұрын

Fantastic!! Great work!!!

@duaneho555 Жыл бұрын

Outstanding video. Thanks.

@tctc8578 Жыл бұрын

Beautiful restoration, you paid homage to it my friend! That’s a stunning grain in the wood too. 👍👏🙏

@dougieranger Жыл бұрын

Absolutely beautiful work. Thanks for sharing this with us.

@damiennofx Жыл бұрын

that handle was fantastic

@HelloAdam_ Жыл бұрын

That turned out incredible, really good work! I love those Shinto rasps for handle profiling, so much better to work with. Need to get myself one of those mini anvils as well, they’re great! 👏

@sergiov9276 6 ай бұрын

Fabuloso

@oldnuts4123 Жыл бұрын

nice job!

@user-sv8fk3ff8u Жыл бұрын

Good very good 👏👏🌹🍀🌹

@diyresttube Жыл бұрын

Good job there buddy..nice restoration.

@kazuwilliams5222 Жыл бұрын

I just completed one of these for a friend's mom. It was wonderful to see how you work on the knife and scales. I learned a lot and hope to find another old rusty.

@OldRusty Жыл бұрын

I'm glad I was able to be useful.

@Danielson1818 Жыл бұрын

Jealous. I've been trying to find an older piece to work on, but I never come across this stuff. I just keep working on new stuff.

@user-px9xw2ot2i Жыл бұрын

Отличная работа! Подписка.

@RestorationAustralia Жыл бұрын

Nicely done.😊

@louisinderchit5793 Жыл бұрын

Bravo, absolument magnifique 😊

@vinceianni4026 Жыл бұрын

Hello mister beautiful restoration good job well done

@LadyLeigh 7 ай бұрын

Beautiful knife restoration. I love the handle! What kind of wood is it? Is it from a Japanese tree?

@blackmamba3427 Жыл бұрын

Awesome video

@romeoalfa1414 Жыл бұрын

cute & sharp ...

@CrimeVid Жыл бұрын

Nice !

@markneo1 Жыл бұрын

BRAVO!!!!!! 👏👏👏👏🇧🇷🇧🇷

@ICU2B4UDO Жыл бұрын

Damn!! Well done lad!! Subbed!

@deko123 Жыл бұрын

登録商標　吉實　　日本鋼 This is a product of Yoshizane Ltd., a kitchen knife specialty store located in Kameido, Koto-ku, Tokyo.

@OldRusty Жыл бұрын

Thanks for the interesting information.

@MrLezhenin Жыл бұрын

Ты что сделал с моим пониманием о заточке? Как я теперь буду жить? Очень крутая работа! Я кайфанул! Спасибо

@apocalypseee4312 9 ай бұрын

superbe

@KrispyBizcut Жыл бұрын

I've watched 3 of your videos in a row and I must say... you're fuckin good brother!!! I know it's not much but you got yourself a new subscriber!!! Now we just need some new videos!!!

@Daniel-tg8wm Жыл бұрын

nice

@bobbagadonuts4365 Жыл бұрын

Nice restoration, but aren't Japanese knives of that shape/length only supposed to have one bevel? Looks like you but 2 on.

@RetroRecipesKitchen Жыл бұрын

Hey! I'm so sorry if this has been answered in other videos. Can you briefly explain the mason jar process? What is the liquid, perhaps how long is it resting in the jar? This is amazing and I'm going down a rabbit hole haha. I want to restore my family's 12" knife that looks like this one with the rust! Great work!

@OldRusty Жыл бұрын

try google cactus juice stabilizing resin

@sebastiaoprudencio6859 Жыл бұрын

👏👏👏

@taragorm0666 Жыл бұрын

Нож бомба. Но на клинке лучше бы смотрелся сатин. А на рукояти под накладками остались ржавые раковины и там быстро будет ржаветь

@Sewermonger 8 ай бұрын

Where did you get that sandpaper sanding block? I've been looking for something like this for a long time.

@bedallsmith190 5 ай бұрын

What was that green stuff you were polishing the blade with?

@estebanbellegarde5811 Жыл бұрын

(Google Translate) Excellent work. Your wisdom on the subject and your skill is wonderful. I would like to know what products you used, for the blade and for the handle. I mean liquids and products. Thank you so much!!!

@hallur7523 Жыл бұрын

Beautifully made! How much would you charge for a knife like that ?

@brettweide7572 3 ай бұрын

Can you share where you purchased the knife.

@vincentcocuzza8679 Жыл бұрын

Awesome videos you make man!! I have a question, where do you get all these old knives ect from? I would love to find a old Japanese blade and try to restore it

@ericfg806 Жыл бұрын

Nice job. Please identify in future vids the liquids used (vinegar and ?(for the scales) in this vid) and also the grit progression during polishing. Also, for anyone wondering the fasteners OP made are readily available and are know as 'corby bolts'.

@OldRusty Жыл бұрын

Thanks for the good advice. Special thanks for the "corby bolts" I was embarrassed to not know what they are called.

@eddys.3524 Жыл бұрын

Nice video and a beautiful result. To me it appeared you impregnated the wood for the handle by a vacuum process. With what substance did you impregnate the wood? Was it an oil or something else?

@OldRusty Жыл бұрын

Hi, thanks for the review. This is a special compound for curing wood and not only wood. It penetrates very deeply into the pores and becomes fall resistant when heated to 90 degrees Celsius.

@user-pu8ty9qq7q Жыл бұрын

俺も持ってる吉實の包丁だ！

@jongirolami4978 Жыл бұрын

Might want to have the blade pointing down in the vise next time.

@petenikolic5244 Жыл бұрын

What is the wood you use on the handles .

@user-sr7pk6dk7t Жыл бұрын

Привет! Где ты такую ржавчину покупаешь? Я тоже хочу! Раскрой секрет, плиз!

@castibegediniz4493 Жыл бұрын

👍🇧🇷

@biscuitkitchentreviews 3 ай бұрын

What kind of sand paper holder is that?

@OldRusty 3 ай бұрын

Printed on a 3d printer. The model can be found here- www.thingiverse.com/thing:2846241

@Mangsaab1954 Жыл бұрын

Erotically sharp! When steel quality and honing angle join at the sweet spot to make a superb blade.

@helgeo.sommer584 9 ай бұрын

@helgehansen3746 Жыл бұрын

Where do you get the knifes?

@OldRusty Жыл бұрын

I usually look at auctions or flea markets. This knife and about 15 other knives were successfully won in a wholesale auction.

@hanikaram3351 Жыл бұрын

where do you find all these knives

@OldRusty Жыл бұрын

Auctions and flea markets :)

@juannoguera1881 Жыл бұрын

that's not a sujihiki that's a gyuto😊

@AT-fi9dj Жыл бұрын

What kind of wood is that?

@OldRusty Жыл бұрын

Betula pendula var. carelica

@user-lastoutlaw Жыл бұрын

у меня был похожий нож СССР с отломанным кончиком, я сделал из него японский, могу выслать фото.

@OldRusty Жыл бұрын

Спасибо за то что поделился фото, Выглядит неплохо, осталось отполировать режущую часть, - будет еще красивее.👍

@user-lastoutlaw Жыл бұрын

@@OldRusty я не очень люблю полированные клинки, предпочитаю под кузницу) лезвие 1.9мм, убрать раковины, получится фольга) да и углеродка все равно потемнеет. удачи !

@OldRusty Жыл бұрын

@@user-lastoutlaw Я не говорю о полировке всего клинка (он выглядит отлично), а только заточенного края, просто на фото он выглядит необработанным... Может это просто фото конечно. А так да, углеродка склонна к потемнению при любой возможности.

@user-lastoutlaw Жыл бұрын

@@OldRusty я понял, я намеренно не убираю следы обработки, мне ближе брутальная эстетика в ножах... зеркальная полировка это не мое, для чего? к тому же, из инструментов у меня наждак, болгарка и прочие мелочи) все делаю на балконе) но РК довожу тщательно, советской алмазной пастой.

@user-spices Жыл бұрын

🙆‍♂️👋🙂🙂👍👍👍👍👍

@budgreenjeans2001 Жыл бұрын

vinegar ?

@OldRusty Жыл бұрын

Yes

@JohnDoe-zw8vx Жыл бұрын

@@OldRusty why? I've seen it done before but no explanation.

@OldRusty Жыл бұрын

@@JohnDoe-zw8vx Vinegar is good for softening rust. I tried to remove the rust immediately by mechanical means, but it's much easier with vinegar.

@budgreenjeans2001 Жыл бұрын

@Old Rusty thank you @ John Doe soak overnight the rust just fell off of a high carbon blade

@JohnDoe-zw8vx Жыл бұрын

@@budgreenjeans2001 my mistake. I thought it was vinegar the wood was vacuum sealed with and then baked. That process (and liquid) are my confusion.

@ishtopor Жыл бұрын

Мужик, ну ты ж видео снимаешь на вроде как большую аудиторию. Ну замени ты этот лоскут из семейных трусов на кусок фибры из ближайшего супермаркета, дел на три копейки, а впечатление вот на таких мелочах кардинально же другое =)

@OldRusty Жыл бұрын

Ты прав, трусы сменил на кожанные... дальше в видео видно..

@jmbstudio6873 Жыл бұрын

Should have used the original wood. Just saying. This looks identical to Japanese knife vid. Yawn. It looks like you are more interested in making handles than restoring knives.