No video
How to wire your RTD (Get proper RTD readings)
Рет қаралды 26,149
Күн бұрынHere are tips how to wire your RTD to a meter by OMEGA engineer, Chet. We'll be using 1 platinum series meter, PR11 Probe + a D20 meter with an Omega calibrator to see if our RTDs are reading appropriately. Hope you find these tips helpful! Our expert engineers are here to assist you.
The following Omega products are used in this video:
RTD Sensors: www.omega.com/en-us/sensors-a...
Platinum Series Panel Meter: www.omega.com/en-us/control-a...
DP20 Process Meter: www.omega.com/en-us/control-a...
CL1000 Miniature Dry Block Calibrator: www.omega.com/en-us/sensors-a...
@girthmccoy 4 жыл бұрын
I am trying to build a temp control device using an Inkbird PID and an XS12 4-pin, 3-wire RTD. Do you have a video that shows how to wire this properly?
@tablatronix 4 жыл бұрын
Why is the green so dim on these meters, I just got my hands on mdssdi8 and the green digits are dim just like that one on the bench. I was hoping to be able to use this across the room. Guess Ill tear it open and check the rails and current, or pwm duty, I wonder if its because the bi color green and red are sharing the same current limit resistors on common.
@homarlopez449 3 жыл бұрын
Hola. Por favor. Tengo un omega cl 1000, pero esta bloqueado para modificar los parámetros, ayuda por favor
@DwyerOmega 3 жыл бұрын
Gracias por preguntar. Póngase en contacto con nuestro equipo de soporte técnico para obtener ayuda. Contacte con nuestro departamento de temperatura en temp@omega.com
@invisible468 2 жыл бұрын
Video title: how does RTD work, in the video: read your manufacturer instructions.... great video.... NOT!!!