"On Board Glory" HITS THE TRACK - Camera Crane RC Drift BUILD

Рет қаралды 35,056

Күн бұрын

Want the best SERVOS? Visit
reefsrc.com/ We used the
reefsrc.com/products/179-smar...
Super strong, very precise, want the best? Get a REEFS!
We're here at STRICKLY SIDEWAYZ CLUB in the quest for the best on board low down, rc drift shots, to build out our 90s era Top Gear montages. From quick cockpit cam shots to wing shots, to on board the Hilux shots. This panning camera mount is bear bones, light weight, and keeps the camera facing the action. what more could we want? Well this osmo action 2 also rocks the house with stabilization. What a power horse! Check out our montages from multiple drift days!
Happy Holidays to you all! thanks for watching! and if you want one of these amazing cameras or anything else you've seen on this episode visit my affiliate links below
Visit stricktly sidewayz club
/ 154173291421943
/ stricklysidewayz
OSMO ACTION CAMERA
amzn.to/3NF2YIS
THREADED ROD
amzn.to/3NCAnUA
RC RADIO CONTROLLER - Open source Radiomaster
BUY IT HERE! Use my Affiliate link!
RADIO +: RECIEVER: EXPRESSLRS
www.radiomasterrc.com/collect...
RADIO+ RECIEVER: 4 IN 1
www.radiomasterrc.com/product...
RECIEVER EXPRESSLRS
www.radiomasterrc.com/product...
3D PRINTER
Suport kpopRC Buy your 3DPrinter here!
Bambu Lab P1P 3D Printer
bit.ly/3Ya3EtW
Bambu Lab P1S 3D Printer
bit.ly/3YvYatO
Bambu Lab X1-Carbon Combo 3D Printer
bit.ly/457Imz9
Superior BAMBULAB Filament
bit.ly/3QsqUBy
00:00 INTRO MONTAGE
01:02 CAM CAR VERSION 1.0 - INTERNAL CAGE
03:32 DRIFTING HERE! TEST AND TUNE
05:41 CAM CAR VERSION 2.0 - REEFS SERVOS
08:31 DRIFTING HERE! TEST AND TUNE
11:12 HAPPY HOLIDAYS! DRIFTING HERE
#RADIOMASTER #BAMBULAB
EXTRA TAGS
RC DRIFT CAMERA CAR, DIY BUILD, WE BUILD A COOL RC CAR, RC CAMERA CAR FOR RC DRIFTING, CRANE CAM CAR, YOKOMO, YD2, SAKURA 5D, REVD, SANWA, RADIOMASTER, COOLRC CARS, RC TRUCK, RC MINI TRUCK, RC TRUCK WITH CAMERA, CAMERA TRUCK, KPOPRC BUILDS A CAMERA CAR, STRICKTLY SIDWAYZ, DRIFT CLUB, TORONTO DRIFTING, TORONTO RC DRIFTING, The Quest For On Board Glory Camera Crane RC Drift BUILD HITS THE TRACK

Пікірлер: 80

@MyraHodgkiss 4 ай бұрын

This is the kind of creativity that keeps RC fun

@thoward816 4 ай бұрын

Unboxing videos are so over done

@DoubleClutchProductions 5 ай бұрын

Yah buddy, thumbs up for not just taking stuff out of a box and actually making RC content. 👍

@kpopRC 4 ай бұрын

It's people like you brother that keep me making videos! We should plan another organ trip while flights are cheap.

@saturnfivehynrgrc581 4 ай бұрын

Video watched in its entirety. Algorithms properly stirred.

@scalebuildersguild 5 ай бұрын

Amazing! Your ingenuity is awesome, and only beaten by your b-roll skills. ❤

@augustwhite7390 4 ай бұрын

I learned how to use onshape in my engineering class. Now I want an rc drift car even more so I can design 3d printed parts.

@kpopRC 4 ай бұрын

as you should! Soak all that on shape knowledge in man! Great for everything.

@mattbrcs 5 ай бұрын

Oh hell yeah

@rcgoodtimes6657 5 ай бұрын

Oh hell yeah

@Killa_b_rc 5 ай бұрын

This man’s love for cheese is crazy 😂

@kpopRC 5 ай бұрын

it's crazy.

@Sega-Mao Ай бұрын

love your crazy projects man!!!❤❤👌👌👌

@safety3rd_rc750 4 ай бұрын

Nice work, I have tried several times to build a camera car (trophy truck) and failed... multiple times. This design gives me a whole new look at it. Thanks so much for sharing your ingenuity.

@BroncLander 5 ай бұрын

Sharing this to FB. It's just too cool not to show others

@scalermfg420 4 ай бұрын

So freaking cool man!

@MysticRiverRC 4 ай бұрын

Having at one time worked as a key grip in film, I do truly appreciate this rig! Fantastic work, and the 'camera car' rigging is awesome! I subbed.

@jerryvolpini7987 4 ай бұрын

Great camera mount, Canuck ingenuity at its finest! The addition of the servo, though, très magnifique!👍 Merry Christmas, have a great one with family and friends! ✌

@CiottiFPV 4 ай бұрын

Oh my god I love it, I’ve been chasing with tiny whoops for the last 6 months and walksnail 1080-60 is watchable but man is this next level!

@CrowBelowCustoms 5 ай бұрын

Solid work as always, dude!

@gainsrc 5 ай бұрын

Hell yeah!!!

@nathandowns369 5 ай бұрын

Wow that's cool

@unkeyron 4 ай бұрын

Awesome Video man! Merry Christmas

@2Geek2bChic 4 ай бұрын

That's a pretty trick setup, nice job! Merry Christmas everybody! 🎅

@The_Jet_Truggy 4 ай бұрын

This is incredibly cool!! Those chase shots were epic!

@BashTillBroken 5 ай бұрын

Sick build now all you need is an fpv build

@ninjonaah 4 ай бұрын

Nice! I've been thinking about doing something like this too to upgrade my chase car 😅

@djapothecary 5 ай бұрын

Awesome build and video! Cheers to beers 🍺🍺

@valinoVISUALS 5 ай бұрын

Awesome build KPOP!! Always coming up with the most original RC content on the interwebs!!! Truly inspirational! Merry Christmas brother!

@kpopRC 4 ай бұрын

thanks valino! hang outs soon!

@ericviger4984 5 ай бұрын

Awesome video as always man. Merry Christmas to you and yours 🍻

@Jonsonkonde 4 ай бұрын

Cool

@darealkosmo 3 ай бұрын

came to check out how you made your camera rig and realized I've got the same Integy wheels on the one I'm working on xD

@ThatDamnGuy14 4 ай бұрын

Cool shots and great content! What about adding a servo to the cam mount and using a gyro to keep it pointed at the action even when the truck is cornering?

@synrene 4 ай бұрын

I was thinking the same thing

@kpopRC 4 ай бұрын

totally we had it connected to the steering servo. the issue is that the gyro will snap the camera as fast as the steering would. it doesn't give a good image for sure. BUT. 3.0 is using large gimbal motors, with an dedicated gimble driver board. That way we can adjust the PID algorithm independently. The gyro doesn't really do much for us, because the stabilization takes care of most of the jitter. but being able to swing the camera back and forth with a large big power low rpm brushless gimble motor will probably be a game changer. we're also adding another operator, with fpv control of the gimble and shot. it's way over kill. the Swiffer does a better job. but it's not as coool.

@VS666 5 ай бұрын

Really digging the new setup! Are you doing an SCX6 video this year?

@Mckhus 4 ай бұрын

Thats sick! Have you though about using counterweight? Think many camera sticks/cranes similar to those have some kind of counter weight on opposite side of pivot, less wobble, less strain on servo. Also those guys with cameras on mops :D Maybe for some ultra low shots you should to that too? Or use one of those shopping cart style wheels to keep in on the ground but not obstruct the driving.

@kpopRC 4 ай бұрын

it's fun thinking up ways to improve it for sure. The next version is going for a much larger gimbal motor. the small shake im really not too worried about, the stabilization is great. now if we could improve the track lighting we'd be golden.

@TS34675 4 ай бұрын

After flying my DJI mini 4 pro today, I was thinking it would be super cool to have a similar "subject scanning" to keep the cars in frame. I'm sure this could be achieved otherwise, but the idea was fun. I've seen videos where they strapped a mini to a larger drone just to use the camera. The low angle shots are cool, but they also block the action behind the first car, so they're kinda a double-edged sword. Very awesome work, as always.

@Fhwgads11 4 ай бұрын

This is really awesome. I’d love to have a setup like this for the shop I run at. Do you think one could run a gyro on all the servos holding the camera up to get an active stabilizing effect like full size camera cars have?

@Weekend-Driver 4 ай бұрын

Awesome work dude! Are you using the mixing from steering input for the camera yaw or was that mostly for demonstration? Shame the servos had to be removed, maybe revert to some manual adjustment instead? maybe try to spring load it in some way? 😀

@bobsrc9075 4 ай бұрын

awesome video as always, i finally entered the scale world and picked up a fcx18. you know of any indoor crawler courses in the neighborhood

@mattyofpv 5 ай бұрын

i jus got that body myself sweet

@mattyofpv 5 ай бұрын

@kpoprc pandora is the maker of it right

@BlueSmokeRC 4 ай бұрын

Holy shit those are some amazing shots! Are the tunes in this episode copyright free? I would love to use them in my projects!

@85hhhh 5 ай бұрын

MerryChristmas !!kpop

@BXTR_Werks_ 4 ай бұрын

🎄🎄🎄🎄

@MauzyrockRC 5 ай бұрын

Awesome amazing contraption to get wicked footage there. Do you design all your parts? I am trying to learn 3d design a little for RC parts. I made a few simple parts but there is a big learning curve. Cheers

@kpopRC 5 ай бұрын

yeah i design them all. just jump in and do youtube tutorials. fusion 360 is the most popular. im using a web based program called on shape. both free for creators.

@MauzyrockRC 5 ай бұрын

Thank you!@@kpopRC

@princefpv1 4 ай бұрын

I'm going to come rent a car this Saturday

@andrewheist5391 4 ай бұрын

Awesome build. And even better that controller isn't 250 its only 130

@kpopRC 4 ай бұрын

yeah ha. oops. that's canadian.

@williamschultz298 4 ай бұрын

The camera seems to swing from side to side quite quickly/a lot. if you shortened the rods it's mounted on it should give it a much stabler view of the action.

@kpopRC 4 ай бұрын

yeah we're changing the setup for 3.0.

@PachezZ 4 ай бұрын

adding some triangulation could solve that :)

@xrouge7x890 4 ай бұрын

Do you sell the 3D parts/ files of the things you design/ create

@kpopRC 4 ай бұрын

not yet. im going to start posting them next year

@stephenpheonix6549 4 ай бұрын

Love your shows just turn the music down while you're talking bro. Music is cool to set the scene but just drop the volume when you're talking. Cheers.

@kpopRC 4 ай бұрын

subscribe and ill think about it.

@stephenpheonix6549 4 ай бұрын

@@kpopRC I am subscribed 🤦‍♂️

@mickd8188 4 ай бұрын

Mmmm Cheese...

@BruceVanderro 4 ай бұрын

hello do you share the 3D files for print the crane ? tank you

@kpopRC 4 ай бұрын

nope sorry.

@BruceVanderro 4 ай бұрын

What’s the point of making a video then? just to show off your skills?

@anthonyparisi511 4 ай бұрын

Kpop, I don't have IG or anything or I would message you there. I'd like to pass on a design to you for an RC "air ride" design I created a while back on one of my drift cars...I figured you could take it to the next level and I'd love to see it. I just don't want to post the pics and vids on here where the idea can easily be stolen. Thanks man!

@kpopRC 4 ай бұрын

Hey dude! thanks so much for the thought. but i've got so many projects on the go. a new one just can't happen right now.

@BigBills1986 4 ай бұрын

Bro take my money, how much for one

@kpopRC 4 ай бұрын

built not bought. ha. build it.

@BigBills1986 4 ай бұрын

@@kpopRC I can’t that’s why I need you!

@princefpv1 4 ай бұрын

U still fly drones

@kpopRC 4 ай бұрын

just my mini whoop and a dji air 3 pro. i really need to get something better 5 incher fpv action. i have the avatar hd goggles. it'll be time to dive in soon. right now velocodroning.

@KentRoads 4 ай бұрын

improve the lighting :)

@KentRoads 4 ай бұрын

I realise you commented on this

@kpopRC 4 ай бұрын

I dont own the track friend.

@timcampbell287 4 ай бұрын

How can I buy one I don't have a 3D printer so I'm looking to buy a couple of those If possible @kpoprc

@kpopRC 4 ай бұрын

buy what? none of this is for sale. get a 3d printer.

@princefpv1 4 ай бұрын

Hey bro I'm in Hamilton and been fly rc for over 20 years we talked back in the day. So I bought a drifter but want to put head tracker and gamble in it. And come out to strictly sideways you know my buddy Bruce wee by chance are you on Facebook

@kpopRC 4 ай бұрын

hey. we played around with head tracking at the drift track. You loose all depth when turning your head. every one that tried the rig, locked their heads. no need for head tracking at all. you won't use it.