On the road ‘tuning’ with ACDodd - S3, Ep7 Cooper’s & Mapping…….

Рет қаралды 3,196

AC Dodd

2 ай бұрын

A couple of very nice Cooper’s, and original
‘S’ and a later RSP, then a 1275GT & ignition mapping……

Пікірлер: 23

@stevestone4346 Ай бұрын

I didn’t realise you had your own channel. Subscribed.

@ACDodd Ай бұрын

Yes, and Thankyou!

@Rlee571 2 ай бұрын

Lovely Mk 3 and gorgeous Clubman!

@mk1leg 2 ай бұрын

wow great job on the GT that was a stunning mini

@billywhizz98 2 ай бұрын

3 great video’s especially the clubman

@MrMkindy 2 ай бұрын

With regards the Cooper S, I've found the twin paper filters in that airbox very restrictive. Slight non cutting mod and K+N filters works wonders for airflow.

@ACDodd 2 ай бұрын

You are correct they are terribly restrictive

@kathysarmcandy1992 2 ай бұрын

Cooper S first; If I understand the set up, and your needle change, it was rich at idle, even with the jet height(s) set correctly. Hence the needle change initially?

@ACDodd 2 ай бұрын

No, the fueling was to rich across the rev range at part throttle, even when set correctly at idle.

@nickhousden1996 2 ай бұрын

Another great video. Do you ever do any works to MPI engines?

@ACDodd 2 ай бұрын

No as they don’t have carbs on. However I still machine parts for the engines and gearboxes/clutches etc

@nickhousden1996 2 ай бұрын

@@ACDodd Do you have your own web shop? Or do you just sell through third parties

@ACDodd 2 ай бұрын

@@nickhousden1996hehehe far to busy for a webshop I have to turn work away already. Contact me through Facebook messenger.

@StefanMiniCooper 2 ай бұрын

Again 3 good running Mini's 👍. AC what are YOUR thoughts to put 1.5 forged rockers in my Mini, it's a 1293 with Kent 266 cam and modified head. I read different stories on The Mini Forum.

@ACDodd 2 ай бұрын

1.5 rockers, not on a road car, the cam life expectancy is too short.

@StefanMiniCooper 2 ай бұрын

@@ACDodd thanks!

@deancook2377 2 ай бұрын

Am I correct in that with a CSI electronic unit and a 3.0 Ohm coil that the plug gaps should be 0.025"?

@ACDodd 2 ай бұрын

That is correct

@vijayananda9973 2 ай бұрын

@@ACDodd is that the same for a 123 distributor and 3 Ohm coil?

@MrMkindy 2 ай бұрын

@@vijayananda9973 My Alfa has a 123 and again 3 ohm coil specified, probably can run higher power but more risk of burning it out. Worth checking their website for details.

@ACDodd 2 ай бұрын

@@vijayananda9973 yes