Well done! Thank you for your support and feedback.

Did this install today by my self 6 hours including skid plates. 2020 F350. Thanks for the awesome video. I used the motorcycle straps and they worked great. 02/24/21

Nice job! I added the Titan 55 to my 17 after your older video. This S&B 60 is sweet as well. This is an absolute must have for mod these trucks. Thx Epic!

A straightforward no BS video. I liked it a lot. Thank you

Having one of these tanks installed on my truck as we speak! Can't wait to pick it up in the morning, recalculate with forscan and enjoy the extended range. My last truck i installed a 68 gallon in bed push button transfer tank. It was nice holding the button for 2 minutes and my truck would go from E to full. Fillups once every 3-4 weeks. Had that luxury for 5 years. Now with this truck and the 34 gallon tank, it drives me nuts I have to stop once a week for a fillup, and when pulling the camper alot more frequent. Last year pulling out to Mass. we had a issue with lack of fuel range. We passed the last major pulloff fuel station without stopping, like an idiot. I had such a issue finding a gas station that i would be able to get myself into and out of. I was down to 15 miles to E before i finally found a station. To say the girlfriend was freaking out was an understatement HAHA.

I have a 2017 Ford F-250 and I enjoy your videos very much.

Nice! I am going to do this to my ‘15. You showed the ease of doing this task. Thanks a lot!

This was the single best upgrade I did to my Super Duty for towing. Thanks for the video it helped with installing it by myself.

Well done brother You helped me a lot when I bought my 2013 F250 6 years ago. Installed the viair air tank with your video, learned the ins and its of the fuel filter changes and basic knowledge of my first diesel. Always enjoyed your how to instructional stuff, Very well put together and edited perfectly video. You inspired me to do a lot of my own maintenance and even recently started killing time trying to post videos and learn editing as a new weekend hobby on youtube. Thanks for posting!

Glad I found this video. Have been debating ordering it. Definitely going to now.

Finally I have been waiting for you to do this install

This guy is cool as hell !!

Thank you for this video. I felt much more comfortable raising and lowering my tank after seeing you use the strap. I lowered my tank with about 12 gal and it worked great.

So cool thanks for your time and sharing that with us I just learned about larger tanks to be had on trucks like this very interesting thank you so much for your time priceless

Well finally pulled the trigger and installed it today. My tank varied from yours a little the breather hoses are longer and actually get zip tied to the filler hose. Did it by myself and was harder than I thought. I had the factory skid plate to deal with. You made it look so easy! Thanks again

Great video. Great narration and how to. Ive been looking at the metal Transfer Flow tanks but $1,700 dollars is really expensive. Good job.

Great video. To the point, use of everyday tools, clear and concise message. Great job, and thank you.

Love watching your videos.excellent job.👍

Great video! Best I’ve seen so far about changing my tank.

Excellent video, you made it look fairly easy to switch out the tank! Thanks for sharing.

That looked WAY easier than the tank I swapped in my 2016 F350 that I watched your video to do. I don’t have this year of truck but I enjoyed watching you do it. Next will be Fox shocks.

That is the cleanest undercarriage I think I've ever seen! Great install!

Thanks for the video. I have the same truck and will doing this as well!

Holy crap! 2 videos in 1 week! You're back!

Outstanding install!

Super video good install video with the forscan codes to complete the project makes it look super easy. Now to get my CFO to administer funds for the project. Thanks for a job well done.

Wow that looks like a great quality item. I put a titan under my 2011 F250 with your help. When I upgraded to the 2017 f350 I got the long bed for the larger tank. Thanks for the video.

thanks for the video. i watched it twice before my install. this really helped out alot! Thanks

Nice work. I went with transfer flow for my 2017 F350 CC LB. Its a 50 gallon auxiliary tank in the bed with the storage area on top of the tank. The part that helped me was how to change my fuel capacity from 48 Gal to 98 Gal. Now miles to empty is doubled. Thanks!

Great video...thanks for doing the video! Installing my tank tomorrow!

Going through my wish list for my truck and l came across ur video again. Its been a long time since l seen any new videos from u hope u are ok with all this covid going around. Thanks l really enjoy ur videos

I’ve wanted to do the same project on my Duramax. The 26 gal. tank is just not enough, but I do have weight concerns as I tow a 5th wheel. Excellent project

Thanks for the video. Did mine today on my 2019 F350 with the B&W GooseBall. What a job. I had a little to much fuel in it. Should of driven some more before starting. It took me way longer to accomplish and I feel I’m pretty competent. The filler hose took awhile to disconnect and also the fuel line with the yellow connector. That thing was almost impossible to separate. Took a little finessing on the front U bolts to slide over the right side 90* bend to the inside. I should of studied the directions a little more on the rectangular spacers on where they went. I didn’t feel like it was up far enough for the skid plate to fit at first so I lowered it back down thinking the vent tube was wedged up in there somehow. Realized it couldn’t go up anymore I rerouted the vent hose along the top of the crossmember. Seems to be fine like that. I used the strap method like you along with an adjustable motorcycle stand which was the perfect height. Can’t wait to fill it up at $5.00 a gallon. LGB 🤣

Excellent tips for doing the install alone! Glad to see the extra range you can get especially with fuel prices going back up! Have you seen that Banks released their cold air intake for the 2017 and up Super Duties, another awesome addition for your rig.

Thanks! Can’t wait to do this to my truck! You made this look easy.

enjoyed the fox shocks video subbed after this video. I enjoy all the numbers talk good content.

Thanks for awesome video. It was very helpful to watch what you did. I installed the 60 gallon S&B in my 2017 F350 yesterday. Now looking for someone that wants to buy my 36 gallon tank. I’m in the SLC area.

That’s pretty freaking cool man I’m definitely gonna have to look into that for my F350 2018 platinum truck. And a very good video

I always seem to come to an upgrade to my truck, that you fortunately have already done, filmed, and I can hopefully follow along with- I don't know why I didn't look at your feed earlier....

Thanks for this. Installing mine this weekend.

Great video. Subscribed !!!

Wish the fuel lines were that easy on my Longbed, I can't see, let alone reach the connectors. Makes changing the fuel filter interesting. lol

Great Video , Thanks For Sharing !

Getting ready to do this on mine. Hope it goes as smoothly as yours.

Great video! Thanks for sharing

Great video now I want one for my 2021 250 tremor powerstroke!

Awesome dude! I didn’t even know S&B made tanks. I had a titan on my last truck. I now have a 2017 long bed dually and just might get one of these in October

great video

Hahahha... thanks for making a potentially long and slow subject fun to watch :)

I’m happy my 19 f350 came with a 52 gallon tank

NICE VIDEO!!!!

awesome job.

Looks pretty straightforward. At that rate i would have to fill my F250 once a month lol

Sweet, now I need to do this for my 3500 ram.

My question applies to many of your videos, how do you clean the bottom of your truck before working on it? You don't even have to wear safety glasses to keep dirt out, amazing. The video and commentary are excellent as always.

Good job

One of these will nearly triple my range. Lucky if I get 250 MTE with the 27 gallon tank, should get near 600 with a 60. I get 10.5 towing my 5th wheel @ 70MPH. Install is a bit more difficult on the 2012 due to the fuel fittings being on top of the tank, but looks doable without a lift. Thanks for posting this.

Harbor Freight Jack putting in some work

Well Done

After 5 trips Northern Michigan to Alaska, this summer was first with my new 17 6.7 with truck camper....many times and n the 4200 miles each way I so wanted a much larger fuel capacity....this is as always an awesome video...

you must be doing superbeets.. lots of work. hahaha. great job.

Has you had any issues with fuel leaking from the vent valves after filling the tank to the top? I have one right now that leaks from the vents when it is filled all the way up and I'm looking for a solution.

We order the Titan tank and unfortunately found out it will not work in line with my aftermarket traction bars that run just below the frame to the rear axle. Dose the SnB protrude under the frame at all or flow straight inline with the frame. Great video by the way. Hoping the SnB will work plus an extra 5gals over the Titan.

Safety first, always use chalk blocks when the vehicle is off the ground, hard rubber will grab the ground better.

Epic Cowlick, we picked up a 2017 F350 Platinum in Feb and this video was the first thing I watched. Love the jumbo tank! Haven’t pulled the trigger on one yet but I have watched many more of your videos. Always a great job. What level do you have on your truck 2” or 2.5”?

What about the fuel guage, will it read empty while you still have fuel in there? Jamie from Australia 👍

Outstanding video and great coverage of the entire process. I had three questions and you answers all of them. I did not hear you post up the epiccowlick discount code for the s&b tank???

@EpicCowlick I've had 3 different Ford dealers try to change the codes to accommodate my 60-gallon tank with no success. So if I purchase the OBDLink MX+ OBD2 Bluetooth Scanner and download the ForScan version for Windows, I should be able the make the same changes you made? It seems pretty simple.. :) Thanks for the videos.. Great job!

Dear Santa... One question- My Firestone air bag compressor is inside the driver side frame rail at about the second bench. Is this going to need to be relocated to fit this larger fuel tank? Great vid(S)!!

How’s it working after two years? Any issues? I’m ordering one and have a 2017. Did you have to change out the fuel Level Sender Resistor Card Assembly? S&B recommends it for 2017s built prior to 3/20/2017.

loved the little jokes "holding penalty"

Thank for the Video, did you need to re-pressurize the system? and on DEF, will the reconfiguration address the refill notification of the DEF?

Nice video.. haven’t even bought a tank yet.. prob will before we try to drive our 5th wheel to Alaska... but I’ll keep this video in the saved pile and watch it again. What’s the next project?

I just put my tank in today on my 2020 F350. Thanks for the video. It helped me out with mine. I did it myself and using the straps like you did made the job easy for one person. Took me about six hours laying on the ground in the yard. Had a little trouble with the fuel filter screw and one of the fuel line clips too. Why can't they just use the same clip on all of them? Mine had three different kinds of clips! 😆 Seems as though I'm only able to get 55 gallons in the tank when I went to fill it up. What's your experience with filling it?

We're you able to fit both on board compressor and s&b tank underneath or different trucks?

Love your videos, man. Been watching for years. Do you think this install is much different for a 2011 F350?

Great video as always! Just bought a 2019 F350 king ranch and the bed is too tall for my fifth wheel I am thinking of changing out the blocks between the axel and u bolts to smaller ones. Have you had any issues with this truck sitting too high?

what axle do you have and do you think the 3.31 will be great for towing a 10k airstream?

That was great thank you. Please give an update on the performance and if any issues arise. Thanks again.

Any problems with the torx screw going back in on the water separator? Apparently, my separator isn't seated fully and I'm having a hell of a time getting it to come down since the tank is already mounted.

Where did you end up relocating the Klein air horns?

You made me laugh lol 😂

How much capacity are you seeing? I just had this installed and can only fill up to 48g (53g total w 5g put in new tank). Also, my new fuel sending unit stops reading after 38g. Are you experiencing the the same?

Great video! I have a 2019 6.7 250 SB and I will be installing the OEM fifth wheel hitch prep kit which requires removal of the bed. In your opinion, would having the bed removed make this tank swap easier for a DIY'er? Can you also please provide a clear picture of the QR code so I can review the installation instructions in detail? Thanks!

The install website no-longer exists. What's up with that?

Great video and narration the whole time. How long would you say it took you to make the swap?

Hi, I like you videos, in fact I have the same truck and I just purchased the same fuel tank, I have no installed yet, but when I come to to one my friend he pointed on something that is going to happen, but you are the best to confirm my suspect, when you fill up the fuel at maximum capacity the truck looks more lowered or not equal height at side? Done by the weight of the fuel?

So is this something I can do to my 2017 F250 if I’m still running DEF or can you only do this if you have done the Def elimination?

Oh snap

Great video. I heard you saw the tank only hangs down 3/4 of an inch lower than the OEM tank. is that accurate because S&B's website states its 1.75 inches lower than the OEM tank. thanks and love your videos.

Now that you have had it for a while, would you do it again? Any additional comments? Thanks, Steve

Can you definitively say this new tank only hangs down an additional 3/4" more than stock?

I got one installed along with a FASS system. My truck would stall out anytime I got at or around 1/4. No power going to FASS. It does start up after about 40 min. Any ideas? (2019 6.7 F250)

Not sure I would put a jack on the rear differential but everything else looked good.

Okay so I installed a 60 gallon on my 250 and now the pressure relief valve is letting small amounts of diesel to drip out and down onto the ground. Anyone else have this issue and how did you fix it.

What made you choose S&B over transfer flow? Also will you be doing a intake and filter back exhaust at anytime on this truck?

Have you ever tested the accuracy of the “miles to empty” reading with the new tank? How accurate? Also, how far do you draw the new tank down now? Have you done the “zero miles to empty” and measured the remaining fuel in tank?

Which forscan adaptor are you using?

Why did you switch from the titan to the s&b?

how are you getting over 17mpg with 37" tires??