Onshape How To:Gears

No video

Onshape How To:Gears

Рет қаралды 89,068

Chris & Jim CIM

Күн бұрын

Пікірлер: 81

@domenicb8938 2 жыл бұрын

9:16 if you don’t see “move Origin” here is a workaround. Draw the line that he does but then use the transform tool. Click the small spur gear and select “translate by line” from the drop-down menu. After that click the line you drew. Hope this helps!

@omar_ahmad 2 жыл бұрын

Thanks a lot, I was struggling on this for a quite a bit.

@jimmydyurko 2 жыл бұрын

For users unfamiliar with the TRANSLATE tool, I made a short video showing how to move the gears into position using translate. here's the video: kzfaq.info/get/bejne/odB4nKmKsJq7k4E.html Thanks Chris & Jim CM for such an awesome video and domenic b for pointing out this solution.

@nullfox955 2 жыл бұрын

I don’t have the move origin tool, why not

@jimmydyurko 2 жыл бұрын

@@nullfox955 It's probably a newer version than he's using. check the video I posted above it shows how to get around that problem. It will also help you move any parts around in the part studio

@exceptionalideas2947 2 жыл бұрын

Version 8 of the add on has it I think However version 9 only uses sketch a vertex or mate connector feature

@PCRduino 2 жыл бұрын

This is the best tutorial I've seen in a very long time. Kudos to y'all, and thanks!

@johnlongphre515 3 жыл бұрын

I like how you tell us why we should or shouldn't do it in a certain way vs. another way, and why.

@silentman625 3 жыл бұрын

This is exactly what I needed. Thank you!

@MidnightMaker Жыл бұрын

Thank you SO much for making this video. Gears was my favorite part of my Mechanical Engineering curriculum.

@6yjjk 11 ай бұрын

Take a shot every time he says "go ahead and".

@ApertureApex Ай бұрын

3 minuts in abd I qm alraady drumk

@neilnerd8111 2 жыл бұрын

Great explanation! This was really easy to follow along with and understand. Kudos!

@ardespmaker 2 жыл бұрын

Really well done - straight forward and easy to understand - thanks for this !

@tp7886 2 жыл бұрын

You deserve so many more likes. This was straight forward and very well presented. Thank you very much.

@KabonkNo1 3 жыл бұрын

This is a really good tutorial. Thanks!

@tristanbrown6954 Ай бұрын

Great tutorial. Absolutely quality content.

@TheHunter2506 3 ай бұрын

Thank you saved me lots of time.

@yairkochalsky6571 2 жыл бұрын

thank you so much, this is the best tutorial ever :D. helped me a lot

@victorymix115 4 ай бұрын

Thank you so much it worked really well

@spacemonkey4564 7 ай бұрын

Thanks brother

@lukabjellos3226 3 жыл бұрын

This was great. Thank you :)

@mlbugbee1 5 ай бұрын

This was super helpful, thank you.

@diegomontez9543 5 ай бұрын

This was very helpful, thanks man!!

@geoffphil Жыл бұрын

Incredible. Great, clear video - thanks.

@AntonyHart 11 ай бұрын

Thank you, super helpful, lots of great tips!

@zip7806 6 ай бұрын

Plugins are why I switched to OnShape after 15 years of Solid works.

@gregblastfpv3623 Жыл бұрын

16:15 You're rotating the blue gear. It has 12 pins and thus 12 holes for the other gear's pins. Which makes a total of 24 sections. 360/24=15.

@flintglockwoodyt 2 жыл бұрын

I don't have the option to move origin. Is there a way to fix this?

@naqibar4478 2 жыл бұрын

Same here im kinda stuck now

@domenicb8938 2 жыл бұрын

Sorry if this is a little late but here is how you can do it. Draw the line that he does but then use the transform tool. Click the small spur gear and select “translate by line” from the drop-down menu. After that click the line you drew. Hope this helps!

@itsjustgusluna6927 Жыл бұрын

@@domenicb8938 love u saved my life

@gunnarbechTV 3 жыл бұрын

oh, exacly what i needed, it helped very much! thanks

@MetalMachineShop Жыл бұрын

Very helpful and clear, thanks!

@juliocoliveira 3 жыл бұрын

thanks, useful information.

@mikedoingmikethings702 Жыл бұрын

Awesome tutorial! Thank you!!!

@reubengreen9810 Жыл бұрын

BRILLIANT VIDEO! Thanks

@exceptionalideas2947 2 жыл бұрын

Awesome tutorial Thank you so much!

@patz5553 Жыл бұрын

Awesome tutorial. THX!

@alvinandreasson136 3 жыл бұрын

Very useful video, well done!

@martinvisintini4369 Жыл бұрын

Great tutorial! thanks a lot!

@samuelreza72 3 жыл бұрын

Awesome. Thank you!

@andrewmarley6530 Жыл бұрын

Never thought Howl from Howl's Moving Castle would know so much about gears

@trarredbandit9734 3 жыл бұрын

This was a great tutorial!

@ruellerz 2 ай бұрын

omg this is all amazing

@skysurferuk 3 жыл бұрын

Great explanation. How about a rack? I'm trying to create a claw mechanism...

@alexarvidsson3788 2 жыл бұрын

Thanks, this help me a lot!

@sambartelet3265 10 ай бұрын

can someone explain how i can rotate the gears so it lays flat i also cant to it with transform

@carlos.galhano 9 ай бұрын

Very good video. I'm just a beginner, can you teach how to make a threaded tube? and how to make a screw and its nut.

@ToolsAandLogic 8 ай бұрын

VERY NICE EXPLANATION.. IS THERE A POSSIBILITY THAT THE GEAR CAN BE MADE IN OTHER PLANE ? RIGHT NOW IT IS IN FRONT PLANE. HOW TO CHANGE THE PLANE OF A GEAR?

@daveka9279 5 күн бұрын

cool vid, but how do u drag the gears in the assembly?

@Nayvixs 9 ай бұрын

I don't have the move origins option. What should I do?

@fork2309 2 ай бұрын

this feels like a bob ross video if he did cad

@smokehead5318 Жыл бұрын

Hello, great tutorial. Do You know how to make textured surface on curved surface?

@julespoulain5198 Жыл бұрын

Please help on 11:39 even after having activated sketch two I still can't pick the little circles to extrude them !! I've redone all steps and I still can't fix my problem. If any of you guys have the solution... Btw great tutorial really well explained thanks ;)

@ellentao6559 Жыл бұрын

Hi Im having the same problem, were you able to figure out how to fix this?

@julespoulain5198 Жыл бұрын

@@ellentao6559 Well yeah, I came back at 10:08 where he uses the "Use project converter" button and as he does, I selected the inner circle of the gears (while modifying sketch 2) with this tool before to draw the line between them, and therefore, I was able to select the little circles to extrude them. It took me a big hour to figure that out, but it took me 2 minutes to resolve it ! Hope it helps :)

@ajaytechhyperloop2138 2 жыл бұрын

Awesome 👌 👏

@lemoinexavier 3 жыл бұрын

You have soo many vids over Onshape. I can´t find the How to start with Onshape. I´m I wrong? ( I hope.. 😉) Great vids btw

@sushicat5005 3 жыл бұрын

When i make the back plate i only get a hole in one of the gears, like i can only select one gear hole when i try to extrude. What am i doing wrong?

@richardepps8500 2 жыл бұрын

How are you clicking the mouse to and manually rotating gears. Mine both spin but at the same speed. But the gears are 3:1

@DuckRoboticsAOE 10 ай бұрын

How do you make a hexagon extrude in the gear?

@vincentgeurts6386 2 жыл бұрын

Great video, but with the latest version I rant into an issue I can't resolve. The “move Origin” has disappeared in v9 and the work around is only partially working, when you use the transform tool the pitch diameter of the moved gear will not move with the moved gear resulting you don't have a the pitch diameter reverence on the moved gear anymore, do you have a solution for this?

@parvizaghayarov935 2 жыл бұрын

It is good method but realy useful for 4 gera train or Compound gear?

@tanayranjan6422 Жыл бұрын

can we make internal gear from this script?

@botpro160 Жыл бұрын

i think you also made a mistake. When putting the gear ratio ( 14:52 ) you have to put output/input (in your case 48/12 and not 12/48) thats also why you did put 15x2 instead of 15 in the revolute edit later on.

@stanthevanman5565 2 жыл бұрын

I feel like Patrick Bateman is teaching me about gears 11:22 especially

@Allan-mf1he 11 ай бұрын

Great tutorial but outdated. Move origin not on gear menu and clocking angle added. Easy enough to figure out. Hope they add more gear types and cam belt pully. So I suggest start with the sketch instead of starting with a gear.

@circle7motorsports 3 ай бұрын

do you know how to change the angle of the gear I need to lay one flat