Hello. Yes ,you can use OCflash

Did you solved the problem ?

@@expert20valvehlx hi yes if I remember you have to buy the cable that allows you to downgrade the firmware. Search online you’ll find it ok if in uk.

Any chinese clone works fine with downgraded firmware (to 1.67, which is the latest official firmware version)

Hello, buy 1.45. 1.59 or 1.65 all are ok for a old car from 2005

Hi, did not found to buy less version than 1.70, this is the costly, cheapest are 1.99, with faulty chips you can not Flash 😢

I have the same problem

vielen Dank.

Hello. yoyo.pc86@gmail.com

Hello, you can also update yourself with OCflash. If you want to run a newer version of the software then you need version 1.65

Hello. Ver. 1.59

Hello, install driver from version 2012.

@@DiMakids128 Hi. Try first with another Software version. Which software are you using?

My advice is to not buy a Clone

Hello, version 1.65

@@YOYODiagnostic thanks you so much, would you be able to help me ? I dont think i know how to do it

@@YOYODiagnostic hello man, will the v1.64 work?

@@alinstanca3726 Hello, yes, when you connect to the program, it will automatically update to v1.65. In my case, it works without problems. I am using the Opcom 2016 version of the software.

@@YOYODiagnostic ok, thank you

Hello. You think this 25-year-old car has special features. I think I'm lucky it's still starting. :))))))

In some ecu you must enter Security Code to activate All Buttons

Hello, I honestly don't remember because I haven't used it for a long time and I don't want to tell you something wrong. But if I'm not mistaken it should show. On gasoline engines, these values ​​show, of this I am sure.

Hello, yes, I can recommend a site that sells original Opcom. Are you willing to pay 720 euros for it or do you just want to test me if I am able to answer your question? ☺️ You can buy it from this site : originaldiag.com/collections/opcom-diagnostic-tool/products/op-com-diagnostic-interface-code-reader-scanner

Hello, yes, I can recommend a site that sells original Opcom. Are you willing to pay 720 euros for it or do you just want to test me if I am able to answer your question? ☺️ You can buy it from this site : originaldiag.com/collections/opcom-diagnostic-tool/products/op-com-diagnostic-interface-code-reader-scanner

@@YOYODiagnostic I'm willing to pay the price but if the colonel work the same I will go for the colone

Hello. If the pic is not original or of good quality then it can be blocked. you must take the risk yourself.

1.65 ist firmware keine Software

well do you have a like to the clone software?

First of all you have to say Hello when you want something. I think you are wrong on this channel if you are looking for programs. Look elsewhere.

Ok good bye 😃

Hello. If it is not powered by the car it means that the problem is in the car. Measure pin 16 in the obd socket of the car and see if it comes 12V, possibly burnt fuse or broken wire.

Hello. Downgrade to version 1.39 exactly as I did in another video, then connect Opcom to the new software version and scan the car. Until the scan starts it will automatically update the firmware. It should be noted that the PIC must be original.

can you help me? I have sent you by mail pictues of my opcam. thanks

@@sharelhun9201 Hello. Yes ,be patient next time do not post immediately on KZfaq. I don't sleep in front of the computer, I have to work. It's useless to write on youtube because I have the data on my PC, so it will be sent when I'm in front of the PC. I understand that you want to fix the problem, but I also explained when you buy them from China, wait 3 weeks for them to arrive and if you don't answer within 24 hours, you can't be patient. thanks for understanding and i will help you!

Brother 99% of opcom built last few years are all fake pic18f458 they are all rebranded fakes of PIC18F45K80 and updating with orginal firmware will turn your 1.65 opcom to a paperweight 😂😂

Use opcom flasher, its a shortcut on the desktop. Find 1.64hex file.

If you want to buy a clone, yes

@@YOYODiagnostic Thank you ❤️

Yes, you need 3 line display at least, you just need to change the code index of the display to one with the board computer, this can be found online

👍

Also there is OP-COM original BASİC E that costs 293€ which is for 349€ in official website. What you recommend? Appreciate your time!!

@@orkhanmamedov8903 Hello. I will always recommend that you go and get your original tools. If these clones can do something, imagine what the originals can do + plus the fact that you have support from the manufacturer. if I help people make them functional it is because not everyone can buy original products and for DIY activity they should be as little functional as possible

@@YOYODiagnostic İt's pleasure to see your reply! İ really appreciate that you make it easy to get what people need! So i am curious about: İf i decided to get clone one which one you recommend for my requirements mentioned above? Excuse my curiosity!))

@@orkhanmamedov8903 MDI 2. You can also use it as Passthru. You can use it with countless software that require the J2534 function.

Excuse for taking your time))

Hello. The latest official firmware version is 1.65. you must try to downgrade to this interface, it is possible to block Pic. You can try because you have nothing to lose, because the interface you are using is not functional now. Uses OC Flash!

@@YOYODiagnostic Thanks for your answer... I did everything exactly as you said. But unfortunately the same problem.... Thank you again for your help.... I did everything with win 7 without andivirus... I hope I find a solution

Ist es möglich der Firmware 1.65 von iregen wo zu bekommen? Ich habe leider nur 1.64 gefunden ... Dankeschön!!

@@theodorosdamaskinidis5447 Wenn Sie die neue Version von Opcom installieren, finden Sie sie im Programm. Sie gehen zu C: wo es installiert ist und Sie werden es dort finden

@@YOYODiagnostic vielen Dank ich werde es probieren

Please be patient next time i will write as soon as i can. It's the holidays and I'm trying to spend time with my family. Please don't leave so many messages. ,,Install driver from old version 2008. ,, If you do not solve, contact me by e-mail.

Hello. Der Bulgare sollte ein Qualitätsklon mit Originalteilen sein.

@@YOYODiagnostic danke für die info 😃👍🏽

Hello. Install driver from version 2008.

Hallo, measure with the multimeter pin 16 from the obd socket, see if you have 12v. Pin 4 and 5 is ground and pin 6 and 14 is CAN, here it must be measured with the oscilloscope. Or the simplest, try with another scanner to see if it has communication. I think Opcom is in trouble because 1.99 is the biggest piece of garbage in China. others like 1.45, 1.65, 1.95 work. Messen Sie mit dem Multimeter Pin 16 von der OBD, sehen Sie, ob Sie 12 V haben. Pin 4 und 5 sind Masse und Pin 6 und 14 ist CAN, hier muss mit dem Oszilloskop gemessen werden. Oder am einfachsten, versuchen Sie es mit einem anderen Scanner, um zu sehen, ob er Kommunikation hat. Ich denke, Opcom ist in Schwierigkeiten, weil 1,99 das größte Stück Müll in China ist. andere wie 1,45, 1,65, 1,95 funktionieren.

@@YOYODiagnostic I have already used another scanner and it worked fine. Were do I get the Firmware from that you recommended to me? Many thanks

@@jorgemarques2624 What do you believe ? Do you follow this Channel?

@@YOYODiagnostic I don't know 🤷‍♂️??? Yes I follow the channel very informative

@@jorgemarques2624 I have my email address posted all over this channel in various comments and in the KZfaq description. I am posting it one more time: yoyo.pc86@gmail.com

Hello. Because 1.99 is fake firmware, I think the current firmware from Opcom is 1.67, in that video firmware from my o Opcom is 1.65.

@@YOYODiagnostic hello , thanks , but you have 1.70 versión , and security Code you can see , but on engine menú ? I need to see my Code pin , thanks

@@ivann.7102 if I write that I have the firmware version 1.65 it means that it is so. The program is something and the firmware is something else. How did you know I was 1.70? Did you watch my videos carefully?

@@YOYODiagnostic Sorry, now I've seen the entire video and I understood it better haha, one more question, where could I buy a version that works with opcom advanced, for example 1.65, .59, .67. ? For it to work and to be able to read the security code (car pass)

@@ivann.7102 👍

👍,

I don't think you're really following this channel because you know a few rules that I don't pass. Please inform more before writing. I'm trying to create a community, not a bazaar.

Do your homework son!

👍

Hello. Write me in the e-mail address what problem you have, but you have to be patient until Monday because I'm away with a little work.

I don't need. 👍 I have Lexia.

where can i download it ?