Thank you very much, you provide instructions that the manufacturer does not provide. I am very grateful to you

I would not have been able to fix my broken trigger without this walk through. Can't thank you enough

👌Brilliant. Wife was off to by a new hoover. Your great instructions cost me £7 for the part and saved me £400. What can you say?

Thanks for that. Would never have been brave enough to pull one bit apart, especially with the "prise that bit with a screwdriver" requirement!

Thank you for taking the time to show complete disassembly; I couldn't have figured it out by myself. It appears that Dyson does not want their vacuums to be repaired. I cannot find replacement parts or repair literature anywhere. You noted in the video the bin retainer breaking on a removable plastic piece required replacement of the whole cleaner; the part is not sold. Likewise, on my 3 month old V11, the retaining fingers on the small plastic clip that holts the electrical connector in the machine end of the long vacuum tube broke. It has a part number on the clip, but a Google search on the part number returns only ads for Dyson vacuums. Thus, only the complete $50 tube is available instead of a $1 part to fix it. Glad its under warranty. To clean my V11, I simply use an electric leaf blower to blow out all the openings and HEPA filter. It works great!

Brilliant video. Thank you. Without you I would never have worked out what was wrong with the vacuum cleaner, got it apart and back together. Fantastic.

Hello big. Now I changed that part and honestly I didn't have any major problems. Thank you very much for this video and if it wasn't for you I certainly wouldn't have succeeded. Thank you once again and I wish you a nice evening.

dyson vacuum cleaner looks simple but it is very complicated when it comes to toggle, thank for your simple explanation, with simple tools.

Thank you x10000000 for this video. Saved me hundreds of dollars; I was able to glue my broken trigger together and restore functionality instead of buying a whole new vacuum! BTW, all of the screws identified in this video as T8 Torx are in fact T9. T8 works if that's all you have, but it's not the right fit. Use T9 if you have one!

Thank you good sir! That red ring rubber and plastic ring thing came off when I was emptying the canister. This was great to figure out how to put it back together again.

This is incredible - And I never comment on videos. Super useful, saved me precious time. The plastic on the cleaner-top of the dust bin just chipped away when I was disassembling for cleaning... felt a bit cheap honestly. If ever, Dyson Europe has good client service, but there is also eBay that seals parts if ever. Cheers and thanks!

you really saved my life and time with this beautiful guide. thank you so much

Thank you so much for this video. My bin came apart and Dyson was worthless on how to reassemble it. You saved me the purchase of a (pricey) new bin.

My trigger broke. This was an excellent guide. I got as far exposing the white dust cover of the control board but didn't know what to do next. I have a V10 and it is glued also. I had to carefully cut and break away the glue to take it apart further but I finally got the trigger assembly out. The trigger is simply too thin and broke after repeated use.

This was extremely helpful, thank you! My Dyson V11 trigger broke, so I referred to your video and fixed it without any issues.

Thanks for the teardown. I was unlucky enough to have to replace the housing around the filter and trigger. Your video really helped me out with the removal of the white plastic inside.

Also I did not have an extension for T8 screwdriver and no shops open late at night so because the screwdriver reached the screw in the switch housing but not long enough to grip I used a clamp/multigrip thing to turn the screwdriver and this worked. Just a tip if this can help anyone else.

There's an easier way to temporarily disconnect the wires! It can be removed from the main motor section by taking apart each section to access the screws to dismantle but then refitting loosely to gain enough access to pop the rubber boot that holds the pins in place from the cyclone zone using a flat head screwdriver and a little force. Then it's just a matter of removing the boot by prying the clip open. To reconnect, loosely fit all the parts together so that the wires protrude enough to refit the boot and then simply pull back into position and then refit as disassembled. Saves so much time!

Very handy thankyou! I didn't bother taking the connector out - just cut the wires then resoldered and heatshrinked.

Hi. Thank you for the excellent guide. I just repaired the trigger in my V11. I had to use crazy glue and JB weld on the one arm of the trigger that cracked (cheap plastic), and now it works. Your guide was PRICELESS.

I would like to thank you for this video. I think I would not have been able to fix it or I may have broken something along the way if I had not seen your video. Many many thanks.

Thanks for the video. Improved functionality when we were getting close to giving up on it.

Excellent guide for opening up my V11, Like previous poster - broken switch trigger, repaired with SuperGlue

For those out there who plan to routinely disassemble for cleaning, skip the entire plastic shim and chopstick routine, and instead, cut the wires, and then attach crimp or solder on bullet style wiring disconnects to the wires...then, in future cleaning cycles, all one has to do is unplug the bullet connectors to service the cyclone

Very useful ! Working great. New life for my Dyson for less than 10 euro (including screwdrivers). Thank you

Had to replace the trigger. Would not have got there without the video. Thanks!

Thanks for the video. Helped me a lot fixing my V10.

This helped me fix my minor issue, thank you very much!

Thanks for this video! It helped me put together again my vacuum canister!

This is an amazing guide, it's been driving me nuts having dirt in the rubber seals of the bin and I got the end flap ones out but had no luck with the vacuum side.. perfect! I think it's a real fault, especially for the price, that its not easier / more intended to disassemble this bin at the very least and honestly cleaning the cyclones easier would be nice too. The unit is obviously quite a lot louder now than when I first got it - air noise wise.

The gray graphite donuts are made of a ferrite material and are referred to as toroids. By looping the conductors through them electro-magnetic fields are setup and aid in reducing electromagnetic "noise." This is often required to comply with FCC interference requirements.

Silly question but which Phillips screwdriver can I use to open mine? I can't seem to find one thin enough to fit in the hole to unscrew the 4 screws on the base. The ones that I have that do fit, are too small.

A very useful video. Thanks! Like most Dyson equipment, the concepts are brilliant, and they work very well - but the engineering is so horribly over-complicated it becomes obvious why they are so expensive! Sadly, useful service information is also almost non-existent, and after-sales help is generally very poor :(

Thank you! If not for this video I would have bought a new vacuum, instead of getting a $10 replacement plastic switch as it was snapped.

Fabulously detailed for cleaning, but doesn’t this void the warranty? Does dyson have a cleaning/maintenance service for their vacuums??

You saved my life, bro! THX!

Amazing video, you walked me through it and now my dyson is deep cleaned! For future concerns, what would happened if I did not correctly insert the black and white wiring? What are signs of problems?

your are an absolute legend, this videos was an awesome help.

video was a great help!! thank you very much!!!

The 2 videos you are referring to, please link them in the description. :)

Thanks your video helped a lot.

Super vidéo...merci !!! Vous être superb!!!!❤

Hi thank you. Amazing video. I have a problem, when I use my vacuum cleaner it malfunctions. I have followed everything you have done and also cleaned the broom. filter has also been washed. the vacuum cleaner malfunctions. the sink lamp keeps coming on. the engine lives its own life. Please help

How do you get the screws out of the part under the purple filter cap? I can't see what I'm doing bc the space is so tiny and down a narrow cylinder. So I'm blindly twisting the screwdriver. Each time I check with a flashlight, the screw doesn't look like it's moved

Very well explained! really useful, thankyou👍

Fantastic video and thanks so much. How can I buy you a coffee?

Awesome video, thanks. Where can I get a replacement grey ring that sits over red ring? The one I have is cracked and when I dump the dirt, it comes off

Well I watched the video and because I wanted to clean the mesh screen and make sure the Cyclone is clean too and disconnecting the wires and the connector and all that I bypassed all that and grabbed my 20 volt benchtop blower I bought from Harbor Freight it has like a 200 mph wind and I blew actually they're Take It Outside cuz it will make a cloud dust like you really don't want in your house anyway forwards and backwards man that thing is clean and I didn't have to disassemble all so much I did take the four screws out of the first part that contains the connector but left the rest of it intact just two separate pieces with the wires hang in and the connector still in place but yeah take that high pressure and blow it kind of blow a cloud out the back where that filter on the back goes and then you blow it the other way through the Cyclone it'll blow just keep doing that and it's a lot easier than what I just watched you do

Thanks for the video! I reassembled and I have 3 long screws that I have no idea where they go. I can see them in your video up against the far side of the box. Can you help me out?

Hello and thanks for your video :) You know if V10 bin is compatible with V11? Normal size, not big bin.I broke mine, and the bin for V11 is out of stock, but V10 is available.

Rather than take the plug out just snip the wires and add some in line crimps when you reassemble. Much easier and makes disassembly next time even easier.

Ther is the silicone skirt/gasket that is above the silver motor part attached to the gray plastic part which looks deformed as it is on my vacume. You didn't mention it. Is it removable? can it be replaced? You can see it at 38:25 right below you right hand.

Very usefull thank you. How are those blue triangles you use called please ? Thanks again. ☺️

Hi, followed all the steps and managed to assemble everything back except now the mode button on the LCD screen on the rear doesn’t change the mode anymore. It was working fine before this, any recommendations on what I can check or which cables to check if there is voltage? Thanks, hope to get it working again

Hiyer! Excellent video! My V10 has the broken trigger issue. Stripped down ok until I got to removing the trigger assembly from the handle. Refuses to come out! The fixing screw just goes round, seems like the assembly is glued in? Your advice please?

the circular rings are ferrite beads. they filter the power going into the connector

Awesome instructions 👏👏👏 MANY 🙏🙏🙏🙏

Justo quería mirar como colocar el cilindro y no se ve como se coloca al armar el aspirador .

Good video thanks - I need to take the V10 apart. I was wondering if I could design a tool (instead of the chopsticks) to knock out the plug - seems it must be long enough to reach the plug and the right shape to push it out??

Thank you. Save me a lot of doller

Every time I place red gasket with grey ring together I make sure it’s lined up so when I place back together with bin gasket they just slide off into the clear bin. I make sure they snap and are aligned, but nothing is working.! Help!

Where can i get those picks that you used to take apart the top of the canister? Great video!

You're the best, thank you!

Thanks for the guide! I'm trying to fix my broken trigger but I pulled out the small sensor cable off the pcb and broke the base connector. Will this affect the trigger? It doesn't look like it connects to anything on the pcb?

What kind of screw driver to open the screws ? Phillips or flat head ?

Great video & explanation ..... Thanks :-)

Hi. Came across your channel while trying to troubleshoot my vacuum cleaner. After removing and cleaning the filter, my vacuum now is pulsating. I have checked all the places like in the video from Dyson on how to check/clear blockages but it’s still pulsating. Any idea what else I can do? Thanks!

The rings the cables are wrapped around are to disrupt magnetic fields or noise

Hi this is so valuable! Could you please share your toolset? Thanks

Thank you so much for ur vid. Very informative. One question though. Can v10 & v11’s bin be swapped? (Meaning use v10’s on v11 and use v11’s on v10?) and can their batteries be swapped as well? I see they are both 25.2v and designed exactly the same but v11 has bit more capacity. Please please let me knw

Just do it during the warranty , if the machine for any reason will be damaged due to this, the warranty will be voided

we have some bits of stuff falling into the dust collector with each use, that look like little fragments of some kind of black plastic screen... but I don't see any part in your video that looks like a fine black plastic screen... and it seems to make filter light blink, even when the filter is clean... what could this be...??

The red rubbery ring inside keeps popping out with the plastic piece everytime I put it back together , what do I do ?

Well good thanks

From where can I purchase the plastic strip that keeps the bin from sliding out please? My bin keeps sliding out because the small piece of plastic that holds the bin from sliding out is broken as shown in the video. Thanks. J

What if battery works and charges but the Dyson will not turn on? 3 blue solid lights when trigger is pressed but motor doesn't engage? Is there a hard reset I csn do? Thank you!

My Dyson brush bar spins ONLY on high speed. It doesn't matter if I have the small or little brush bar attached...they only spin in the most powerful setting. Trying to run on the two lower setting results in the motor pulsing with no suction and no brush bar spinning. Any help??

possible that there is no tutorial for the v11 with snap battery ?? unfortunately some steps are different ...

Thanks!!

Watching again! Thanks 👍🏻

Thanks perfect 👍🏻

Thanks

hi can you help ive took a part my dyson 11 because my power button is not wotking it does not come in and out how do i fix it please

you can buy replacement slide piece from amazon i bought one myself

Thanks men👍👍👍

tres bonne video .. Merci ...🙏👏

At 27:16 where exactly do you place the screwdriver? I cant get that part off :(

thanks. no other brand has the same cyclones as the dyson, I guess they can't copy it completely

can you reply to my question on the asus rog gr8 ii dissembely please,

Is it possible to disassemble the motor itself?

Amazing video! Do you mind telling me what screwdriver (size) you are using to remove the red ring? (min 5:16) Thank you

Can you post the original video here and give credit to him?

GRACIAS PERFECTO

The red clip on the dust collector doesn’t come down far Enough for me to click it to remove it!! Any ideas!

Can u please share the template of the “plastic tool” to me? Many thanks!

Dyson me up 😩

Thanks for this great guide, it was extremely helpful (broken trigger)! Do you have Paypal or Patreon so I can send you a little gift?

Hi, can you please give me the reference (size) of the screwdriver you're using to remove the display/handle part, the long one in black and yellow. Thx

I cannot find ANYWHERE how to take apart the LOOP of the am09 dyson hot+cool. I know how to disassemble the base, core and remove the loop but to tear apart the loop itself I have not found anything. Please help me

I’m trying to upgrade my graphics card on my hp all in one model 24 computer so I can’t link my oculus without it messing up but idk