OpenBuilds Nema 17 Belt & Pinion System Build
Рет қаралды 16,886
Күн бұрынHere is a simple to build, modify and adapt belt and pinion system that can be used for a variety of linear based motion applications.
📦Get your bundle here:
openbuildspartstore.com/nema-...
📚Learn more about your build:
openbuilds.com/builds/nema-17...
🛒Shop here:
openbuildspartstore.com/
@waldvogelreview7755 6 жыл бұрын
I have already been designing this for my CNC router build. 2080 with steel plates on the sides. GT2 belt in this configuration with the polycarbonate wheels. I doubled up on the plates to make the universal plates "thicker" for this application
@watchingin3d549 6 жыл бұрын
you can go 6 wheels with that plate too but it wont let you do a XY stage with 2060 or 2080. It will with 2040 or run 1 side 2060/ 2080and the other 2040. It also allows more movement on smaller lenghs of v slot.
@rickharms1 6 жыл бұрын
I did the same, except add a "bottom" belt. Another length glued to the rail with the teeth up. The drive belt meshes with the bottom belt.
@lorddracocast 3 жыл бұрын
Will this work with a bandsaw table? Looking to make a sliding table for ripping 2 to 3 feet logs about 6 or 10ish inches wide.
@lowellyates7404 3 жыл бұрын
where do you attach a gantry, thanks
@OpenBuilds 3 жыл бұрын
Please have a look at some of the examples included in the Build here under the Files and Drawings Tab. Also make sure to check out the discussions to join in and see how the community is using these actuators. - openbuilds.com/builds/nema-17-belt-and-pinion-actuator.7499/
Inventor K
Рет қаралды 36 М.
FISPECKT
Рет қаралды 202 М.
Skillbox Программирование
Рет қаралды 900 М.
Typecase
Рет қаралды 2 МЛН