OpenScan Mini Testing: Best budget 3D scanner for Warhammer 40K Miniatures in 2024?🚀🔍

Рет қаралды 18,802

Күн бұрын

🌟 Considering whether to get a new scanner or got a 3D printer and want to make replicas of your old Warhammer 40K miniatures?🎥
Join me in this hands-on exploration of the OpenScan Mini, a revolutionary 3D scanner for capturing the intricate details of your favourite tabletop or Warhammer 40,000 miniatures.
🛠️ Key highlights:
Prep for 3D scanning:
Setup OpenScan mini
1st scan workflow
detailed model review.
🔗 Links:
OpenScan Mini: en.openscan.eu/openscan-mini
👍 Don't forget to like, share, and subscribe to stay updated on our ongoing exploration of tech in the Warhammer universe! Share your thoughts and experiences in the comments below. Let's push the boundaries together! 🚀🔍
#OpenScanMini #Warhammer40K #MiniatureScanning #TechExperimentation #Photogrammetry #digitalcraftsmanship
Chapters:
Intro: 00:00
Overview: 00:40
Prep: 01:51
Setup: 02:59
Scan1: 04:17
Scan2: 09:35
Scan3: 11:46
Results: 14:18

Пікірлер: 128

@KrullMaestaren 6 ай бұрын

Wow, the technology is improving so much every year. Those results look like enough for and amature like me to remesh it. Sharp , clean shapes and add lost details :)

@tabletopscanman 6 ай бұрын

Couldn't agree more! I'm just starting out with this hardware as well imagine what I will get in a few months!

@ilyabelomy8090 7 ай бұрын

For the best results, prime the model in a flat black paint, let it dry and then use a scanning spray. I would also make the scanner parts black. The spotcheck skd-s2 developer spray has worked best from my testing. You can use the vanishing spray as well, I recommend the orange version. The blue disappears too quickly.

@tabletopscanman 7 ай бұрын

Thank you I will try that next time. How do you get around parts that are already painted? Strip then prime again?

@ilyabelomy8090 7 ай бұрын

@@tabletopscanman I would strip them if the paint is too thick. It is also best to scan minis in parts. I would have glued the tyranid wing seperate onto a small base to get better details. Use the bases as a reference for scale. The scanner is not accurate when It comes to scale.

@tabletopscanman 7 ай бұрын

@ilyabelomy8090 I did think it would have got better results in bits. I thought scanning it as one item would give more features for tracking though but I'm still finding my feet jumping from structured light scanning to photogrammetry, thanks for your help! Any reccomendations on what to try scanning next?

@ilyabelomy8090 7 ай бұрын

@@tabletopscanman I would prime a few models black and practice using the scanning spray. Do not apply too thick, keep your hand in motion as you spray in short bursts. Crop the camera image for smaller minis for faster processing. I have good results with the open scan classic. The classic gives you more options for larger models and terrain.

@xyonblade 6 ай бұрын

what about priming white? what difference does it make to prime black and use white spray vs priming white or priming gray?

@learntooilpaint 5 ай бұрын

Nice video, I havent really thought about it before, I am doing some videos and work aroundminis and was looking for a nice simple way to do scanning, this is now my preferred option, but I have other things I need to buy for other projects first, but this is definitely on my list to look at when i have the available funds

@dougwhiddon8227 6 ай бұрын

This is EXACTLY the review I have been looking for. I've been on the fence about buying this scanner as I was concerened about the DIY aspect. I really wanted something more commerical and out-of-the-box. I even bought a CL Lizard only to find that it isn't really good for what I want. I am definatly going to buy this now. As I have 3d printers and can print parts and already own a Raspberry PI that I can use the cost goes down quite a bit.

@tabletopscanman 6 ай бұрын

Glad it helped out buddy, I would say this and the cr lizard are different beasts though so make sure you are picking it up for the right reasons. What sort of things do you scan?

@Mozzytm 7 ай бұрын

Theres a whole community doing this. Pretty much perfected it too. For doing plastic minis use dry shampoo. On top of grey plastic you get an almost perfect result. I generally use 200 photos though

@tabletopscanman 7 ай бұрын

What?!? Where? Did I pass the entry exam? 🤣🤣

@Mozzytm 7 ай бұрын

@@tabletopscanman if only I could attach images or DM

@tabletopscanman 7 ай бұрын

@Mozzytm in the process of setting up another tg at the minute I'm offline for the next couple of weeks due to holidays but will see if I can track you down after 🤟

@LeoniusCastellan 6 ай бұрын

Hi mate! where can i get some cool scans?

@Mozzytm 6 ай бұрын

@LeoniusCastellan not from a public comment :D

@swells1 5 ай бұрын

wow that scanner is impressive. I'm not sure about my ability to assemble it, but am definitely interested. Good video! Thanks!

@tabletopscanman 5 ай бұрын

It's a great way to get into 3d scanning. The assembly isn't as complicated as it may look in the manuals but it does take some thinking for sure! Glad you enjoyed the video.

@nopenope5598 Ай бұрын

Great video, thank you!

@OnceinaSixSide 6 ай бұрын

Absolutely insane!

@tabletopscanman 6 ай бұрын

Thanks buddy its pretty awesome.

@openscan_eu 7 ай бұрын

Thanks a lot for your work and the great video! :)

@tabletopscanman 7 ай бұрын

No problem, thanks for sending it over to test it's a great bit of kit! Would be interested to get your "best" scan settings if you have any? what shutter speeds, number of photos, etc do you find gives the best results?

@openscan_eu 7 ай бұрын

@@tabletopscanman This really depends on the model and preparation. The most important thing is the object preparation and you will get better results, when applying the spray more lightly creating those favorable tiny dots. This really needs some practice though. Alternatively, you could use an airbrush on lowest pressure to uniformly sprinkle the surface with random dots

@GirlPainting 7 ай бұрын

Hello Openscan_eu . If you need additional reviewers on youtube, let me know ;-) i am always interrested in cool product reviews to show my community. greetings, Alexandra

@harrymorris613 6 ай бұрын

I've been using this hardware for scanning painted miniatures for use in Tabletop Simulator. I don't want to repaint the figures, so I'm not doing any powder or spray. Using Kiri Engine for the photogrammetry. Really great results. If you want the 3d model for printing or modding purposes you are better off with powder or spray, but for use online painted figures w/o spray look great.

@tabletopscanman 6 ай бұрын

I agree the results have been fantastic for game purposes, the file size is really small compared to the quality of the output!

@xyonblade 6 ай бұрын

I've been looking for more info/videos about this recently, glad it popped up! It's a steep price point for me, but might be worth it for my "tiny hammer" dreams.

@tabletopscanman 6 ай бұрын

Glad it was useful buddy. Is there any models you'd like me to test it with?

@xyonblade 6 ай бұрын

@tabletopscanman i wouldn't know myself heh. Hmm... i guess testing it with something like a rhino?

@zigzag2091 7 ай бұрын

great video, was a bit shocked to see how small your channel is

@tabletopscanman 7 ай бұрын

Thanks a lot, I'll take that as a compliment thank you.

@ravnOne65 Ай бұрын

Very cool. Incredible result for a small and cheap scanner. the details are good enough, because you can do a retopo in Blender

@tabletopscanman Ай бұрын

Thank you. It's an awesome scanner for sure! Blender makes cleanup work easy enough indeed

@evanstavrou918 5 ай бұрын

Hey I know I'm late on this video but your video helped get me into scanning I just got my mini setup and I have already logged hours of scanning

@tabletopscanman 5 ай бұрын

That's great to hear! How are you finding it?

@TheCanadienMickeyMouse 7 ай бұрын

this looks GREAT, any chance you could 3d scan action figure acessories? and do a video espically if you have any vintage he man body armor parts :) this is great

@tabletopscanman 7 ай бұрын

Thank you I don't own much vintage he man stuff. I have an action figure sized model I will give a it a go with though no problem. Might be a couple of weeks as I'm off on holiday but I'll get it done.

@TheCanadienMickeyMouse 7 ай бұрын

@@tabletopscanman sweeeet happy holidays :)

@tomsutton6451 3 ай бұрын

Absolutely awesome video and content as always. Is there something that delivers results as good as this that can be used for larger models, like Bloodthirsters, Keepers of Secrets etc? Looking for the best way of trying to print those.

@tabletopscanman 3 ай бұрын

Thanks a lot! The fundamental practice behind this equipment is photogrammetry. You can achieve some pretty great results with your phone or a dslr that aren't limited to the size of the object and only limited to the amount of time you're willing to put into it. If you're looking for an off the shelf scanner for those items, though, I don't think you will find something at the minute that will give you the scale you need and still grab those details you're after. You can do it with the revopint mini but it does require some cleanup modelling after you scan. Hope that helps. 🙏

@scurvy786 7 ай бұрын

I've been thinking of building one of these, please post a video once you've scanned some with scanning spray and many photos, i would love to know if quality is worth my effort of building one.

@tabletopscanman 7 ай бұрын

Sure buddy no problem

@_Diaghilev 6 ай бұрын

Thanks for the video/review. Were these scans taken with the 8 megapixel camera, or the 16 mpx camera?

@tabletopscanman 6 ай бұрын

No problem 16 mpx

@darthkek1953 7 ай бұрын

Scanners make my head explode.

@lanasmith4795 7 ай бұрын

Oh I just got it. that's so bad

@LeadDennis 5 ай бұрын

I would like if you wanted to do a blender video to show how you clean up the models.

@tabletopscanman 5 ай бұрын

I've been concentrating on getting the best scans I can at the minute but a workflow video should be easy enough to do. I will add it to the list!! Thank you.

@broncofun5636 7 ай бұрын

Can you please scan unpainted plastic? Some of the missing detail might be due to the layers of paint on the mini. It would be great to see those then 3D printed and compared to the original.

@tabletopscanman 7 ай бұрын

Yeh I will upload another one when I get back from holiday should be about 4 weeks.

@MyrdhinBZH 5 ай бұрын

Impressive (Oo). What do you think about Revopoint Mini 2? And OpenScan-mini vs Revopoint Mini 2? Thanks

@tabletopscanman 5 ай бұрын

I think they both have their use cases. Anything below around 60mm is better on the openscan mini but larger may be better with the revopoint because its not limited to turntable. The openscan also appears to have much higher quality scan output from a significantly less dense mesh and costs A LOT less.

@ShitpostingArchive 7 ай бұрын

ngl the scans are pretty good but not good enough. is there a way to get better results like scan in a finer setting?

@tabletopscanman 7 ай бұрын

Fair comment. Things that will improve the results: number of photos taken ( I used 100), preparation technique (I used baby powder over an unprepared model, ideal is black primed with white speccled detail) and absolutely nailing image focus (mines a bit blurry in places I'm going to print a black back shield and work with manual focus and focus stacking in the next couple of months)

@ducomaritiem7160 6 ай бұрын

I now own the OpenScan Mini and the Classic. On the mini I always use 52ms shutter speed and use only 40 foto's when scanning Wargame figures. That seems to be enough. And saves a lot of time... I do not like the setup of the Classic. I'm in the process of mounting the camera on the scan arm and the turntable on the floor. So in that way the (heavy) modell doesn't come off. So, I really like the OpenScan stuff, and also use them at school, teaching the staff and teachers how to use it.

@tabletopscanman 6 ай бұрын

Awesome thanks for sharing your settings, what do you do for prep? I think I will do a video dialling settings in at some point, acceleration being one of them as I'm finding that larger models are a bit wobbly similar to you.

@xyonblade 6 ай бұрын

O ordered my own kit for an open scan mini, just gotta print the parts , get a raspberry pi, and get a camera, and I can put it all together when I have it. I'm going to do some scans testing out with a matte primer and sprinkling white and gray primer on top for the spotted surface that I see in the pictures from the documentation, for me personally its easier than getting the scan spray, plus it wouldn't evaporate so I can come back and scan again and again, do more testing, add more light dustings of spray, etc.

@tabletopscanman 6 ай бұрын

Nice!! From what I've been experimenting with I think a dark primer with developer spray is the best way to go. You get various shades of white from it and it can be cleaned off when you want. The vanishing stuff is mostly for painted bits and things you can't clean after. Let me know how you get on, what sort of bits do you plan on scanning?

@xyonblade 6 ай бұрын

@@tabletopscanman I've got plans to create some "tiny hammer " armies, around 15-20mm, and i was planning on scanning miniatures from the 90s because i just am more familiar with and enjoy the older 40k minis compared to the ones today.

@tabletopscanman 6 ай бұрын

@xyonblade sounds like an a awesome project. 90's models were the golden era 😄

@plazma2891 5 ай бұрын

oh boy oh boy its coming! its only going to get better and cheaper!

@benmuir6570 Ай бұрын

Looks a bit rough but can easily be fixed in zbrush.

@Thee_Lord_of_Darkness 6 ай бұрын

Can you use a pc to run the scanning software or is it best using a R-PI?

@tabletopscanman 6 ай бұрын

The firmware for it is loaded on the pi I'm not sure if the software has been compiled on different OS's. Might be worth pinging Thomas at openscan a message

@openscan_eu 6 ай бұрын

You can use any photogrammetry software to process the images. Controlling the motors and camera through the PC is only indirectly possible through the webinterface (from nthe Raspberry Pi).

@Viskovitz 6 ай бұрын

I am deciding between this scanner and the Revopoint mini. For miniatures, which of the two would you choose? I'm concerned that openscan takes so long to scan each part, revopoint seems a bit faster, doesn't it?

@tabletopscanman 6 ай бұрын

Hard one really buddy. The openscan picks up more detail than the revopoint, they both take the same amount of time to prepare your models and the actual scanning is probably quicker and easier with the openscan. The revopoint is better at 70mm and above because the openscan only has a limited scanning area. I plan to do a comparison video when I'm back home. Hopefully it will help your decision a bit, keep an eye out for it!!! Probably about 3 weeks from now.

@xyonblade 6 ай бұрын

my personal opinion is scan quality is more important than scan time, you want it to look better from the scan, the time will be worth it

@komix0 6 ай бұрын

I have revopoint mini and from what I can see in this video and online this one is much better in details but much more limited in object size.

@tabletopscanman 6 ай бұрын

@@komix0 very true

@akumaking1 6 ай бұрын

What about the Kiri Engine scanning app?

@openscan_eu 6 ай бұрын

You can basically use any photogrammetry software to process the images. Though I am not sure about the quality of the output of Kiri Engine and if they offer highest reconstruction quality as this is quite compute intense. It is definitely worth trying.

@RealKull 17 күн бұрын

Can it scan an N-scale figure? (10mm / 1:160)

@tabletopscanman 17 күн бұрын

@@RealKull think that might be too small for it but I will try something like that in the next set of videos I do for this scanner.

@TheCanadienMickeyMouse 6 ай бұрын

If your back from your holidays great and please make a video with this openscan scanning action figure armor and or acessories 80's-90's please as i might get the this photogrammetry scanner :) if your still on holidays ENJOY bud eh :)

@TheCanadienMickeyMouse 6 ай бұрын

any chance for some 80's-90's action figure armor scanned with the photogrammetry scanner?

@tabletopscanman 6 ай бұрын

No problem buddy back from hols. Comparison vid is first off the blocks but larger action figure type models will follow after that.

@TheCanadienMickeyMouse 6 ай бұрын

@@tabletopscanman action figure armor PLEASE ( he man two peaice armor or mummies alive clip on armror , or something with a 2MM thickness armor sorta thing ) PLEASEEEEEEEEEEEE i looked at 6 scanners claiming they can do it no no they cannont atm a scanner that could do it starts at $5000...to $40,000 here in australia

@tabletopscanman 6 ай бұрын

@jaywittman192 currently on the market for a predator action figure I'm sure that will have accessories and such.

@TheCanadienMickeyMouse 6 ай бұрын

@@tabletopscanman now that can work too as the overall wall thickness is the same or thinner even modern action figure body armor accessories will work too ultimately my armor is just 1.x-2x thicker than a blade of a kn!fe but have details such as pin/clip holes etc (2mmx2mm)

@dakotagear8439 6 ай бұрын

You need to try the Revopoint Mini again. They have new scanning software that works a lot better with the scanner. Try it with the updated software and compare it to the Open Scan.

@tabletopscanman 6 ай бұрын

Doing exactly that at the minute!! check out my last post on here if you can.

@tabletopscanman 6 ай бұрын

Also found that the merging of scans has become near impossible in revoscan, whats your experience with it? It continually gets alignments messed up. Might be a noise issue thinking about it 🤔.

@dakotagear8439 6 ай бұрын

I was having that problem as well, although it seems to of lost the merging feature its tracking has improved. Before I was finding it difficult to stop and start during a scan, now if I pause it I can check for defects adjust and resume without much issue

@dougwhiddon8227 6 ай бұрын

How does it compare to the Revopoint mini?

@tabletopscanman 6 ай бұрын

Glad you asked was planning to make that my next video. I think it covers the smaller parts that the mini can't quite get too. I've done some great scans with it but it's aimed at 50-70mm miniatures and above. This covers that lower point down to 28mm much better. Both have a learning curve and are both different technologies though so bare that in mind.

@dougwhiddon8227 6 ай бұрын

@@tabletopscanman That was my take. I really wanted to just buy something off the shelf so I bought the Liard and then I got on the Revopoint mini kickstarter. Then I found out that neither is designed to do what I want. I re-sold my revopoint as soon as it arrived, but I still have the lizard for some slightly larger stuff I still want to scan. I've been saving up for the Openscan, but my 3d printer screen just went out, so back to saveing. Hope to have it in a month or two and get some scans done.

@MrSergiones 6 ай бұрын

SCAN THE CLASSIC HEROQUEST MINIS!!!

@tabletopscanman 6 ай бұрын

I think someone may have already done that buddy. If you ask around in the right places someone will point you at them.

@carlosbarreto4695 4 ай бұрын

There are Telegram groups where you can find the classic HeroQuest minis.

@ducktergoose8317 7 ай бұрын

like the video very informative. but you got to improve on your sound mixing, music at 7:45 was very loud. keep it up :)

@tabletopscanman 7 ай бұрын

Yeh I know I still have work, thank you for giving valid criticism I truly appreciate it. Anything else you would recommend?

@ducktergoose8317 6 ай бұрын

Not really, I enjoyed the video the 3 examples/tests were great, and the video didn't drone on for to long. It was nice, relatively quick and informative. thumbs up （＾∇＾） @@tabletopscanman

@tabletopscanman 6 ай бұрын

@ducktergoose8317 thank you if you think of anything else in the future please let me know I'm always looking to improve 😊

@matthewhaworth5935 5 ай бұрын

I'd rather just spend more and get something like the mini 2. It has a software suite to make getting a solid starting point super fast and easy, and its not so limited in the size of object you can scan and you dont need to rely on any cloud servers/internet.

@tabletopscanman 5 ай бұрын

I own a revopoint mini (boasts the same specs as the mini 2) I think the output scan quality from the openscan is better. Not being a 3d sculpter this matters to me most but your skills may differ from mine. The openscan doesn't need an Internet connection it just speeds things up if it does, ive found most people tend to use metashape as an alternative. I'll do a comparison video for you 😉.

@alexistoulouzan7663 7 ай бұрын

Have you tried with a sprue ?

@tabletopscanman 7 ай бұрын

I might have done a lion at some point and it may be in forests of telegram somewhere...it may have also got me banned so I'm a little shy about it 😅

@Mozzytm 7 ай бұрын

So you're the one. I know whereof you speak 😂 I did smell trouble when I saw that pic.

@tabletopscanman 7 ай бұрын

@Mozzytm 🤣🤣 I think I'm one of many to be honest, plenty who are much better than I am!!

@RileyGein 6 ай бұрын

As long as that one bay doesn’t end up profiting off your work lol

@Fabodroidgaming 7 ай бұрын

Its a step forward, but still a long way to go.

@tabletopscanman 7 ай бұрын

I'd say a lot of it has to do with me not knowing the hardware and best process for it just yet, I think in about 3 or 4 months I should be producing good quality items.

@Fabodroidgaming 7 ай бұрын

@@tabletopscanman i will Return and check!

@iainaitken8966 7 ай бұрын

Grteat video. I've had a pretty disappointing experience with mine so far. Unanswered emails and lack of any kind of support. For some reason the software won't recognise the arducam so I haven't been able to do anything with it,.

@tabletopscanman 7 ай бұрын

Thank you. Seems like an odd one as they've been very helpful with me. Weirdly I had a similar thing I fixed it by changing firmware version and changing the orientation of the camera ribbon cable at the camera end ( I was sure I followed the instructions perfectly so maybe the orientation in them was incorrect) have you tried the same?

@iainaitken8966 7 ай бұрын

@@tabletopscanman yeah, it’s really frustrating lol. I’ve tried many times even swapping out the cable. Can I ask how you were communicating with Thomas?

@tabletopscanman 7 ай бұрын

Yeh I can understand that. You can see the firmware version I'm using near the start of my video if you wanted to get the same one going on yours, I've personally had no issues contacting via email.

@JHB141 7 ай бұрын

Tempting as it is to make your own minis for nearly free, I can't get past the piracy aspect of this. I'm sure I'll catch all manner of crap for saying it, but there it is.

@tabletopscanman 7 ай бұрын

I see your point I think piracy would be selling these or distributing what you scan on. I think the ability this gives you to create your own unique versions of models by adding further details and reposing what otherwise would be static models is it's real draw for most people (or least for me). I can 100% see where this could be used to make recasts but recasts are already out there and done a lot cheaper.

@user-um1xo9ed1x 6 ай бұрын

Shouldn't that middle word in your title be spelt with an "m"?

@tabletopscanman 6 ай бұрын

Sorry buddy I'm sure thats hilarious but I don't get it.

@RileyGein 6 ай бұрын

Only thing I can think of is “Scan” becoming “Scam”? Even then I don’t see how someone could think it’s a scam 🤷‍♀️

@user-um1xo9ed1x 6 ай бұрын

@@tabletopscanman I understand, I am a Dad and it was late.

@tradtke101 5 ай бұрын

Why is every YT video like "the sponsor didnt pay me, they just gave me thousands of dollars of free toys, so I have no conflict of interest." That's some Clarence Thomas level mental gymnastics. Obviously if you don't praise a sponsor's product, other sponsors won't give you expensive gifts in the future. Its totally fine to do this but stop talking about it like you're not a paid endorsement. You are.

@tabletopscanman 5 ай бұрын

It's just a statement buddy. IMO if that means it's a paid endorsement to you then that's fine by me. If you think the review was unfair in anyway by all means let me know, I'm always looking to improve.