Selection and Change of the Gear of the Micro Tiller
(1) When the micro tiller is working in the field, gear I and gear II shall be selected at most, otherwise it will cause overload, thus affecting the service life of the micro tiller.
(2) When it is necessary to change the high gear during the operation of the micro tillage machine, the clutch must be disengaged first, then the gear lever must be turned, and then the desired gear can be engaged.
(3) When shifting from a low gear to a high gear, the accelerator should be increased to increase the speed before shifting. When shifting from a high gear to a low gear, the accelerator should be reduced to reduce the speed before shifting. This not only ensures smooth driving, but also avoids gear damage.
More information contact us
Website：www.strongjx.com
WhatsApp：+8618831909331
Phone/WeChat：+8618831909331
E-mail：sichuangjx@126.com