Opinel 12c27m vs Spyderco 8cr13mov vs Buck 420hc

Рет қаралды 46,689

Naki NP

7 жыл бұрын

Opinel N10 Inox
Spyderco Resilience
Buck Selkirk large

Пікірлер: 124

@jeffreyfernandes2662 4 жыл бұрын

Your simplistic style belies the fact that you are an accomplished user of the knife and communicator. This beats all the over production drama, hype, graphs and is honestly the best. knife recommendation video on the net. In these trying times I find watching you wield these knives with skill , care and respect very relaxing. Thanks you Phurong Nguyen and I hope you and yours are healthy and safe.

@wadejensen3301 7 жыл бұрын

wow...the opinel really kicked arse on that one! could be a lot of factors but it would seem that the 12c27 definately has the edge

@knifesharpeningnorway 7 жыл бұрын

Wade Jensen its because its very very thin at and behind the edge compared to the other knives and its convex. Opinel are some if not the best in blade geometry out there to bad they dont make more modern folders or fixed blades with a little better steels and hardness they would dominate the market as they do now with their traditional folders.

@williamhollar7844 6 жыл бұрын

The Buck 420hc looked just as good

@christianhaykus452 4 жыл бұрын

The Opinel has a thin blade stock with a very thin edge. It will naturally cut better that the others.

@jonahdavis9206 Жыл бұрын

@@williamhollar7844 I agree I'd say there was clear winner on this one and that would be Buck, for how thick it was it definitely sliced the paper best after the coconut

@shootisttx15 7 жыл бұрын

I don't even speak Vietnamese, but understood your video perfectly. Good job!

@shootisttx15 7 жыл бұрын

The Spyderco was pretty disappointing...

@nakinp8525 7 жыл бұрын

Thanks you so much

@josh33172 7 жыл бұрын

The Spyderco blade geometry and grind is not optimized for the task. The title compares blade steels but blade steel and geometry go hand-in-hand. I have a Spyderco Resillience, and it's a compact hard-use folder with a beefy spine. Also, the Spyderco is 100% serviceable and the handle design will be grippier and more comfortable long after you've had hand fatigue using the Opinel. Both are great knives for different uses. EDC are a very very tough market, and you can easily lighten your wallet trying to get the "perfect" one that does better on most EDC tasks, or you can buy a few different knives for the specific tasks. This just exposes that.

@rickeybullington68 4 жыл бұрын

@@nakinp8525 what is all that noise in the back ground . It s very annoying.

@nakinp8525 4 жыл бұрын

@@rickeybullington68 Its motors and scooters noise, you know Vietnam is the most motorcycles in the world

@erikramaekers63 5 жыл бұрын

The Opinel is a terrific knife.The nr12 costs about 16 euro's.

@thomasmaloney843 4 жыл бұрын

This lines up with the results that were obtained by Peter on the Cedric and Ada channel. This almost seems like it was filmed in Saigon.

@zxcbfadbnatrn 3 жыл бұрын

U has Just tested exately the 3 knives i can't choose between!

@QuantumPyrite_88.9 6 жыл бұрын

Great video and Thanks .

@sebastiaomedeiros9981 2 жыл бұрын

Sou novo no seu canal, gostei do teste faça mais comparativos com canivetes, abraço !

@bangrachan1604 7 жыл бұрын

GREAT VIDEO, THOUSAND THANKS

@jacobsebastien3910 6 жыл бұрын

Luv my buck vantage with 420hc blade

@JJtastic 7 жыл бұрын

wow great video thank you for sharing

@nakinp8525 7 жыл бұрын

Thanks for watching

@mrgeorgejetson 6 жыл бұрын

Looks like Buck is the clear winner here, but this still leaves many questions, other than what brand of knife you should buy if you want to put it through some fairly rough use. I say this because the heat treatment and blade geometry both count for something, maybe as much as the makeup of the steel itself. Buck might produce harder 420HC steel than Spyderco does with its 8Cr13MoV, and it's clear from the video that the blade on that Buck is considerably beefier than either of the others (the real shocker here is how well the Opinel stood up--pretty amazing at any price, given the relative flimsiness of the blade, but downright amazing for a knife you can get for under $20!). I have a Leatherman folder in 420HC that I'm very fond of, and for a long time I used it or everything from EDC-type tasks, to heavier use on camping trips. However, the Spyderco Tenacious in 8Cr13MoV that I bought earlier this year seems to retain its edge for longer. In general, this is what you'd expect: the Spyderco, being made of "harder" stainless steel, keeps an edge longer but is a little harder to sharpen than the "softer" carbon steel blade, which dulls a bit more quickly. But those scare quotes are there for a reason: to indicate that the hardening process also plays a major role in the finished product, which means that depending on the manufacturing process, you could very well get the opposite result, as you do in this video. To my mind, this demo is more about the specific brands and models being tested than about the steels, per se. Good work on the video, by the way. It's a great example of "pure" documentary cinema that gets straight to the point.

@jimybrooks6055 5 жыл бұрын

Buck and opinel preform about the same with that in mind the next thing to look at is price opinel cheaper so it is clear winner

@Sujamma_Enjoyer 2 жыл бұрын

@@jimybrooks6055 Yeah if you’re so poor you can’t afford a buck go for the opinel

@ttjbiggunner2025 Жыл бұрын

@@Sujamma_Enjoyer lol is it about being poor or getting the best deal

@Sujamma_Enjoyer Жыл бұрын

@@ttjbiggunner2025 it’s not that clear cut the only thing your paying for with opinel is the blade steel

@powerplay4real174 4 жыл бұрын

The Opinel is sharp ,but the Buck is two kinds of sharp with the blade and looks , the Spyderco will need it's edge touched up alot ,but it got the job done.🙂✌️

@f.tscent1158 2 жыл бұрын

If you are looking for self defence spyderco is the best here ,but if you want everyday use knife go for opinel

@artoturunen4816 3 жыл бұрын

I have Spyderco Resilience and it does not come with shiny edge or so smooth closing. It is stiffer at closing. 8cr13mov is less shiny. Great video nonetheless

@censusgary 2 жыл бұрын

They all work, but the Opinel costs a small fraction of the others’ prices.

@Sujamma_Enjoyer 2 жыл бұрын

True but Just how simple do you want to get with a knife design? It’s bordering and bland

@cristianitsirc6830 2 жыл бұрын

@@Sujamma_Enjoyer I'll take function over looks anyday

@Sujamma_Enjoyer 2 жыл бұрын

@@cristianitsirc6830 your hardly getting more function and you can get a 110 in s30v if you are cutting coconuts all day besides the 110 is more durable

@nekkomr Жыл бұрын

@@Sujamma_Enjoyer true but nobody seems to realize the strongest folding knife still sucks compared to cheap fixed blades when doing tasks like these

@davidcarson7855 7 жыл бұрын

I carried the carbon Opinel 10 and 12 for years when I was working as a pharmacy tech--easy to keep sharp and easy on the pockets

@haasformulaonefan9795 5 жыл бұрын

According to some people, the handle on the buck falls apart (screws loosen up). Is that true?

@JDMorris81 4 жыл бұрын

Never had that problem with any of mine. All mine are USA made though. The one he is using is a China made Buck.

@Sujamma_Enjoyer 2 жыл бұрын

Only if you baton with it ie use it like a axe to split wood for a fire

@fast03vette4me 3 жыл бұрын

Forget the knives, now I want fruit. Got any papaya. Green is good with salt! Ripe is sweet YUM!

@NatureBoy711 2 жыл бұрын

LOL !

@khunflaxkrab 4 жыл бұрын

what is your GRIP style???

@ronaldoronaldo4898 7 жыл бұрын

Gutes video.Das Ergebnis hat mich nicht überrascht.

@nakinp8525 7 жыл бұрын

Danke!

@williamhollar7844 6 жыл бұрын

The Buck done great

@Jimatuscc 4 жыл бұрын

I'd say the real surprise is the Spyderco, well done!

@ObsidianJayMusic 3 жыл бұрын

the buck i am happy atleast has the edge still

@ajshort7105 5 жыл бұрын

What kind of sharpener do you use

@nakinp8525 5 жыл бұрын

Lansky 4-rod diamond

@BEAUCERON. 3 жыл бұрын

Opinel❤️❤️❤️❤️❤️

@zxcbfadbnatrn 3 жыл бұрын

Wich One works Better?It seems buck

@victorediaz1 2 жыл бұрын

ME CANSE DE ESPERAR.

@michelmorales50 4 жыл бұрын

Ouah!! Opinel is the best for 10 $!

@jtomos 7 жыл бұрын

Is your test based on factory sharpening?

@nakinp8525 7 жыл бұрын

Nope, I put a better edge on it with my sharpener.

@mrgeorgejetson 6 жыл бұрын

I'd be curious to know what kind of sharpener you used. If it's the pull-through type, then you'd be doing more harm than good, tearing up the blade edge and causing it to dull much faster.

@mikesummers8141 Жыл бұрын

You sure can tell the difference in Chinese made Spydercos can’t ya?!! As everyone probably knows, ya try that test with an American made Spydercoco and results would be completely different…but price would also be 5 times higher. Great video!!!

@Joezinho187 Жыл бұрын

Spyderco is trash

@farchymuqaddas3780 4 жыл бұрын

With 440c..???

@whiteroseproject7207 4 жыл бұрын

Different grinds, different angles, different blade geometry.

@tln1720 6 жыл бұрын

Opinel dùng làm dao sinh tồn/đi rừng đc không ạ ? vì em sợ khi làm việc nặng, câi cán = gỗ có thể vỡ ._. ( nói về No 6 )

@nakinp8525 6 жыл бұрын

Gỗ nó rất tốt, khó mà vỡ, nhưng cũng ko làm dao sinh tồn được vì mỏng, ko thể chặt cây chẻ củi, opinel chỉ để cắt thôi

@tln1720 6 жыл бұрын

à vâng, em hiểu rồi. em còn 1 câu nữa, vì cái này không có lãy khóa phía sau nên nó có đc phép lưu hành ở Việt Nam không ?

@sonnguyen-ni7qx 7 жыл бұрын

Cầm dao vậy hông đau tay hả anh? thấy thế cầm đó đau chỗ giữa ngón cái với ngón trỏ quá. Mà hình như clip này, spy thép vừa dễ mất bén mà cầm lại đau tay, khó gọt hơn nữa phải không anh

@nakinp8525 7 жыл бұрын

A có bài review trong EMC đó, rất đau tay và khó cắt

@user-bh5ej8vu2l Жыл бұрын

Лучший из троицы по моему опинель, более удобный в работе, более резучая геометрия клинка

@juanvicentebemejolopez4109 3 жыл бұрын

Are automatic or open assisted knives?

@jonahdavis9206 Жыл бұрын

They are all manual opening folders, the more simple the design the less likely something on it will break

@bazartejamilito3488 3 жыл бұрын

những con dao tuyệt vời

@thongle6859 6 жыл бұрын

Con spyderco anh mua giá bn vậy anh

@kaewkusolsuponthorn8777 6 жыл бұрын

Opinel number one

@Duyanh2806 7 жыл бұрын

cảm nhận của a Naki về con opinel inox thế nào a :D

@nakinp8525 7 жыл бұрын

Thép rất tốt trong tầm giá, bất tiện đóng mở 1 tay, nhưng làm bếp cắt thức ăn cực hiệu quả, con mắc tiền khác cũng ko sánh bằng về cắt ngọt.

@nguyenao783 4 жыл бұрын

Vậy con thứ 2 là 7c13mov ??

@mistersmith3986 4 жыл бұрын

The ONLY two companies that know how to do 420HC are Buck and Gerber. ⚔️

@garethbaus5471 7 жыл бұрын

Great way of comparing individual knives although it does not indicate why one performed better than the other due to the number of differences between any two of these knives, variation in profile, handle design, and edge geometry, as well as steel.

@cristophsauser3043 5 жыл бұрын

Es una recilencé?

@user-xq1db2fh4l 2 жыл бұрын

Reselens...

@michaelcosme5560 3 жыл бұрын

He seemed to cut the paper properly with the other two knife and the spyderco his technique was that of a child....

@ObsidianJayMusic 3 жыл бұрын

feelings hurt? its ok mine are too i just bought a spyderco

@mecho68 4 жыл бұрын

Opinel is a lesson for us all . Smart hard working peasants from France against city slickers from New York and such .A lesson for people which blow hundred of dollars on a knife . I have spent a lot of money looking for a good knife and it was , under my nose all the time . What an irony .

@sorenwitte7637 2 жыл бұрын

It's a gentlemans edc

@mecho68 2 жыл бұрын

Yeah, is good for everybody.

@aldosarretti9223 7 жыл бұрын

Buck is the best

@dbcooper6592 7 жыл бұрын

The spyderco performance was pretty bad. Maybe you should try the spyderco military next.

@nakinp8525 7 жыл бұрын

Im testing same level steels, spyderco military s30v is higher level

@dbcooper6592 7 жыл бұрын

I was just saying I would be very interested in how the spyderco military would perform doing the same task. Thanks for your videos keep up the good work.

@josh33172 7 жыл бұрын

s30v is much higher. Its also a steel that can be pushed much further for the blade geometry as well. The Opinel is a great knife, but not a do-it-all EDC. The PM2 is much much more capable at more tasks than than the Opinel, and the ergos will be far better for you hand deep into its usage, and its fully serviceable. The great thing about the Opinels is that you can carry it, use it, and if you break it, and replace it for less than a few beers at the pub.

@D00MTR33 6 жыл бұрын

Josh K sorry but for tough or long cutting an Ipinel would feel much better in hand than a pm2. You saw how the resilience was hurting his hand and it doesn't have that compression lock cutout that's a we'll know hit spot. I love my elmax pm2, I put thicker marble c.f. scales on it and it has a Krein regrind so it's a laser but after cutting a bunch of cardboard it made my hand sore.

@VanHellsing12 5 жыл бұрын

@@D00MTR33 because you got baby girl hands probably and I'm sure you're going to retort with I got Kung Fu Grip fingers or some shit like that

@sgonzarro 6 жыл бұрын

que fruta es esa??? porque los cocos son duros y hay que romperlos

@nakinp8525 6 жыл бұрын

I dont understand what you mean

@lucianodaros 5 жыл бұрын

Green coconut

@cazadorazteca4952 4 жыл бұрын

Es coco tierno se corta de la Palma.antes de que este muy maduro es cuando tienen más agua que pulpa

@winMC201 7 жыл бұрын

cho mình xin cái wed vào xem hàng đc ko

@nakinp8525 7 жыл бұрын

Mình ship từ amazon về, ko có buôn bán gì ko có wed nhé

@erikspyderco5273 3 жыл бұрын

I'm guessing the opinel will far win.

@nenadsmiljanic1923 6 жыл бұрын

Opinel

@sbno119 5 жыл бұрын

Buck & Opinel Sharp very well I think Spyderco not good sharp

@SuperSneakySteve 7 жыл бұрын

Carbon steel is always the best.

@RazzerKrull 6 жыл бұрын

Not compared to new super steels

@SuperSneakySteve 6 жыл бұрын

An Opinel is $10. A super steel knife is $200-$500 and only comes close to carbon but doesn't surpass. I'll stick with carbon.

@RazzerKrull 6 жыл бұрын

SuperSneakySteve i assume you mean carbon steel, and no. We have taken advantage of various elements and alloys, so that super steel can surpass carbon steel in hardness, edge retension, corrosion restisance and toughnes. But it is still very expensive.

@TheDaniel85 6 жыл бұрын

The opinel is not even carbon steel, it's a nice pure fine grained stainless steel from Sweden. Also, the Spyderco uses a middle grade steel, and the Buck a lower grade one. No supersteels here. Properly heattreated Powder steels are beasts in edge retension but a bitch to sharpen at times.

@CaptainBeetheart 5 жыл бұрын

This is actually one of their stainless models! I only own the carbon version, but this video has intrigued me

@mrrony653 4 жыл бұрын

the spyedrco not orginal

@VanHellsing12 5 жыл бұрын

I found it interesting that his after cutting and again slicing papers again, his slicing Style with the Spyderco was completely different than the other knives after he cut these coconuts it was more like he was trying to press it through the paper more then slice it through the paper which he did with the others. I have to call BS and it's biased again Spyderco resilience because mine doesn't dull out from harder work than that one coconut shaving

@MACPEDVIC 6 жыл бұрын

what a disgrace spyderco is

@user-gn1nv5zh8x 4 жыл бұрын

Какието не такие кокосьі, как у нас в магазине продаются. У нас с твердой ореховой скорлупой, под которой если разбить молотком похожая на ореховую мякоть.