OptiMate Battery Chargers: Frequently Asked Questions

No video

OptiMate Battery Chargers: Frequently Asked Questions

Рет қаралды 42,765

Күн бұрын

With over 25 years of experience in saving, charging and maintaining starter batteries worldwide, this FAQ video gives you THE answers to some of the basic questions about our OptiMate battery chargers.
00:00 - Intro
00:43 - Why should I choose OptiMate battery chargers and accessories?
01:11 - What’s the difference between a lead-acid and a lithium battery charger?
01:32 - Is there a charger suited for both?
01:42 - How do I know which charger is best for my motorcycle battery?
02:16 - How do I know which charger is best for my bigger automotive or marine battery?
02:50 - Which charger will revive my dead flat lead-acid battery?
03:16 - What’s the difference between ‘Select’ and ‘Ampmatic’?
04:05 - Can I charge a lead-acid battery with a lithium charger?
04:15 - Can I charge a lithium battery with a lead-acid charger?
04:28 - Can my OptiMate be used for AGM batteries?
04:44 - Can the battery remain in the vehicle while charging?
05:09 - How long does it take to charge a battery?
05:31 - Is it safe to leave the charger connected?
05:43 - My OptiMate gets warm, is that normal?
06:01 - Can I use my OptiMate during winter?
06:22 - I lost my manual. Where can I get a new one?
Questions or comments? Leave them below!
And don't forget to hit the subscribe button if you like our content!
Subscribe: / @optimate
Like: / optimatebatterysavingc...
Follow: / optimate1
Visit: optimate1.com/
More videos:
How To Charge Multiple Vehicles At Once - OPTIMATE
• How To Charge Multiple...
Charging Lithium-ion LiFePO4 Motorcycle Batteries | OptiMate
• Motorcycle Lithium Bat...
FLASHING LED LIGHTS | Battery Charger #OptiMate 6 & 7 12V/24V
• FLASHING LED LIGHTS | ...
#optimate #batterycharger #batterycharging

Пікірлер: 136

@OptiMate 3 жыл бұрын

✅ Subscribe ✅ & hit the 🔔 Notification Bell 🔔 if you're new to the channel, for more videos coming soon! Make sure to comment as well as we love hearing from you!

@TomBretthauer 3 жыл бұрын

Excellent video. Answers many of the common questions related to charging batteries.

@OptiMate 3 жыл бұрын

Hi Tom, thank you for the feedback!

@RetroBiker 3 жыл бұрын

Excellent. What sort of idiots give this the thumbs down?

@drw1926 7 ай бұрын

Where are your chargers manufactured? I am specifically referring to the OptiMate 6 and 7, both Ampmatic and Select series.

@OptiMate 7 ай бұрын

Hi! Our chargers are manufactured in China.

@islord999 10 ай бұрын

Thank you! Good stuff brother

@OptiMate 10 ай бұрын

No problem 👍

@petebusch9069 8 ай бұрын

Why do these chargers have such a horrible interface forcing me to read the manual or watch a video everytime I use this thing? This is a serious question and I'm not trying to bash the product. I expect to see an individual button for each operation, each button should be clearly labeled what it is using a word we understand. No more push and hold multifunction buttons, these require a manual as nobody can remember what to do. Every light should have printed words next to it telling me what it is and why its on.

@OptiMate 7 ай бұрын

Thank you for sharing your opinion about our product. While our current design may not meet everyone's preferences, we greatly appreciate your feedback as it helps us understand different user perspectives. Your insights will be valuable in highlighting areas where changes could potentially improve the user experience for a broader audience. We will continue to consider different points of view in our future developments. If you have any more specific suggestions or thoughts, we would love to hear them.

@truelife13 7 ай бұрын

Great video, very informative. I have one question. In the video you mention the Optimate 4, 6 & 7 are good down to -40C. I am looking at the Optimate 5 for my vehicle and the website says -40C rating as well. Was it left out of the video on purpose or was its inclusion just missed? I want to make sure I get one of the -40C ones as I live in northern Canada. Thank you!

@OptiMate 6 ай бұрын

Hi! We are happy to hear that you found the video useful! Our Bronze series OptiMate 5 Start/Stop (latest version) is suitable for use -40°F / -40°C: optimate1.com/om5ss The previous version (up till 2021) is suitable for use down to -4°F / -20°C: optimate1.com/product/optimate-5-start-stop

@davetjuk2002 2 жыл бұрын

Very informative.. Thank you 👌

@OptiMate 2 жыл бұрын

You're welcome!

@user-rt1gu2io1x 3 ай бұрын

I am using OptiMate 4 Dual Program. When charging starts, the power lamp (1) and The (5) lamp comes on, and after a while, only the (1) and (4) lamps light up. AMPS lamp is off This condition lasts for more than 24 hours. Is this normal? The battery was 12.85V before charging the TTZ10S. The lamp number is the LED number in the manual.

@OptiMate 2 ай бұрын

Thank you for reaching out and providing detailed information. When the power lamp (1) and lamp (5) come on initially, it indicates that the charger is assessing the battery condition. Afterward, when lamps (1) and (4) are lit and the AMPS lamp is off, it means that the battery is fully charged and the charger has switched to a maintenance mode to keep the battery at an optimal charge level. Given that the voltage was 12.85V before charging, it suggests that the battery was nearly fully charged to begin with, so the charger is likely maintaining the battery. This is normal. If you continue to see this condition for more than 24 hours and are concerned, you might want to double-check the battery's health and connections. If you have any more questions or need additional support, feel free to ask!

@paragkhare7406 11 ай бұрын

I have the OptiMate 2 DUO x 2 BANK. I have only used it once in the last 2 years. I am using it today and only one bank lights up when it's connected to the car battery, while the other side does not light up when it is connected to the second car battery. There is a OptiMATE CABLE O-23, Extender, 'Artic'/10 Amp, 15ft / 4.6m connected to the wires on the second bank and then the other end goes into the battery. I have tried to swap the two banks with the two batteries. It is conclusive that the lights on the second bank do not turn on. What does this mean?

@OptiMate 11 ай бұрын

Hi! Please fill out our contact page on our website and select 'warranty / repair' as the subject: optimate1.com/contact/ We're happy to help!

@jamiehowarth8108 3 жыл бұрын

Do I need to use the crocodile clips first to get a full proper charge before using the quick connect ?

@OptiMate 3 жыл бұрын

To get full proper charge, disconnect the battery from the bike or any other electronics, and let the charger charge the battery completely. After this bench charge, connect the battery to the bike, install your quick connect lead, and maintain / charge as often as you can.

@JAST-mi4hr 3 ай бұрын

Hello, I would like to buy Optimate 5 6/12V (TM320) for motorbike (10 Ah) and car (80 Ah) battery. What does the ampmatic means? How many amps does the charger will be charging 10 Ah battery? Will it be maximum 1/10 capacity of battery (maximum A)? Thank you.

@OptiMate 3 ай бұрын

Hi! AmpMatic means that the charger automatically adjusts the current to match battery size and condition. The maximum is not 1/10 A, it's actually up to 30% for AGM batteries.

@ledske5528 Жыл бұрын

Can i leave my optimate connected while driving? Does the charging of the alternator hurt the optimate unit of solar panel? I have a 20 watt version permanently installed in the car.

@OptiMate Жыл бұрын

Hi! Yes, you can leave the OptiMate Solar 20W connected while driving. You don't have to worry about the alternator damaging the solar unit. Make sure that the panel is firmly attached and cannot come loose while driving.

@steve45058 Жыл бұрын

My optimate 4 has the charge light full but the 0.2 amps blinking. What does that mean? I don't see a light on at the test area. But when I unplug and replug, it shows green before it goes to the full charge light and the 0.2 amps blinking

@OptiMate Жыл бұрын

Hi! It's the CAN-bus pulse charge. Are you charging a BMW via CAN-bus? Or is the CAN-bus mode selected on the charger?

@hugovaca3394 Жыл бұрын

Hi, I needed to move the bike from where I was charging it with an Optimate 1 DUO. Is it safe to reconnect it to continue charging? Thanks! (by the way, I left it charging throughout the night, 12 hr, and it was still yellow...)

@OptiMate Жыл бұрын

Hi, yes it's safe to reconnect the charger to continue charging. An OptiMate charger will never overcharge the battery, but only provide the charge that the battery needs. The OptiMate 1 DUO only has 0.6A of charging power, so depending on the size of your battery, it may take a while to fully charge. You can leave the charger connected unattended and wait till the charger has done its job.

@jesusasensio895 2 жыл бұрын

Hello, I own an optimate 4 can bus unit to maintain the battery of my BMW 1200 GS LC and it works great on can bus mode. However, I frecuently check the motorbike through the OBD2 conector which needs having the contact on but engine off what dryes the battery. I wonder if the optimate could be connected during obd2 checking charging the battery or will detect leakage and stop charging. Anyway is there anyway I can charge baterry during long service with optimate 4. I didnt try just in case. Thank you.

@OptiMate 2 жыл бұрын

Hi, our Select models have a Power Supply mode, ideal for this type of use.

@jesusasensio895 2 жыл бұрын

@@OptiMate ..so...no possible with optimate 4?

@OptiMate 2 жыл бұрын

No, the OptiMate 4 does not have a Power Supply mode, so it will try to SAVE the battery when the voltage drops but the eventual result will be that the charger does not know what to do because of the continuous changing charge voltage.

@jesusasensio895 2 жыл бұрын

@@OptiMatemmm...just what I thought... it's a pity....it shouldn't be so difficult to include that mode on the optimate 4 via software. Is that upgrade /possible/planned?

@OptiMate 2 жыл бұрын

@Jesus Asensio there is no such upgrade planned.

@Gaillard 3 жыл бұрын

Is there any issue to use an Optimate 4, recommended up to 50 Ah, to maintain a 60 Ah car battery? Other than longer charging time, of course.

@OptiMate 3 жыл бұрын

@Gaillard No issue here.

@brianlund9685 Жыл бұрын

Is the optimate 5 start/stop used for 12ah-160ah batteries or 15ah-192ah batteries, I’ve seen both on different sites.

@OptiMate Жыл бұрын

Hi, our previous version of the OptiMate 5 Start/Stop was ideal for 15Ah-192Ah batteries. Our new Bronze Series version of the OptiMate 5 Start/Stop is for 12Ah-160Ah batteries: optimate1.com/om5ss/ Officially we don't sell the previous version anymore, so it's the Bronze Series charger for 12Ah-160Ah that has the 'correct' information as we no longer refer to the previous version.

@princekatiyarptm 3 жыл бұрын

Can you suggest me which one is better to use with BMW G 310R Optimate 1 or Optimate 4...which version is perfect for bmw g310 r...

@OptiMate 3 жыл бұрын

Hi, the OptiMate 4 is our best BMW motorcycle charger.

@vanessawood2410 2 жыл бұрын

Hi there. I have the Optimate1 Duo. How do I know when my motorcycle battery is fully charged? Thanks

@OptiMate 2 жыл бұрын

Hi! If LED #3 is lit, the battery is fully charged. When you keep the charger connected, the charger will proceed to voltage retention tests alternating half-hourly with battery maintenance, to keep the battery active and fit.

@danielh4392 Жыл бұрын

Hi, I've got Optimate 5 start/stop for my car, it says "ideal from 12 Ah". Could I still use it to charge a motorcycle battery of 9.1 Ah? Thank you

@OptiMate Жыл бұрын

Hi, 9.1Ah is too close to the safe margin. We recommend not to use our OptiMate 5 Start/Stop to charge it. Rather choose one of our motorcycle-specific chargers: OptiMate 1 DUO, OptiMate 3 or OptiMate 4.

@moconnor50 Жыл бұрын

I plugged my OptiMte 4 in the the outlet and no lights come on. It's been working perfectly for almost a year now this.

@OptiMate Жыл бұрын

Hi, please contact our after-sales team by filling out our contact form: tecmate.com/contact/

@10tigre1010 3 жыл бұрын

Hello, I saw that according to the published images of the product, in websites it is selling apparently 2 versions of the OptiMate 6 Ampmatic. One of them has the frontal panel with the brand Optimate and the other has several symbols describing the charge and test processes. Could you please tell me which of those versions is the most updated? (thinking in buying one from Amazon, may be I would have to ask which version is before purchasing, to get the most recent version). Which of them do you recommend to buy? Thanks!!

@OptiMate 3 жыл бұрын

Hi, we only have one version of the OptiMate 6 Ampmatic: optimate1.com/om6/

@Daddioooooo 2 жыл бұрын

@@OptiMate I also have an optimate 6 ampmatic as described by the gent above. Model TM188 I've owned it for perhaps 8 years now. Again, it does NOT look the same as the one in your provided link. It looks just as described by the gent above. Please clarify.

@OptiMate 2 жыл бұрын

Hi, you mean the version until 2021: optimate1.com/om6-18x/ We no longer sell it. Our OptiMate 6 AmpMatic Silver series has 6 amps of charging power, while its predecessor had 5 amps.

@hugojlsantos 3 жыл бұрын

Top👌

@OptiMate 3 жыл бұрын

Thanks!

@markmcsweeney8145 2 жыл бұрын

Hi there, have an optimate 2. I have 2 motorcycle batteries. One is showing just the left green light even after 10+ hours. The other 1 goes all the way to right side green but flicks back to yellow every few seconds. Any helpful tips?? Please

@OptiMate 2 жыл бұрын

For both batteries, get them out of the vehicle first and then connect the charger. Then see what the charger tells you.

@paulwitham7957 2 жыл бұрын

Left solid green and flashing green on right after save

@OptiMate 2 жыл бұрын

Hi, the charger is testing the battery!

@brianlund9685 Жыл бұрын

What is considered deep discharge, when I hook a optimate 5 start/stop up to a battery with 12.08 volts #3 red light comes on meaning deep discharge, is this normal?

@OptiMate Жыл бұрын

Hi! Yes, it's normal. The charger considers the battery to be deep discharged below 12.2V and possibly sulphated. SAVE mode will be active first to safely bring the battery back to 12.2V and normal charging starts from 12.2V.

@patrikalfoldi67 Жыл бұрын

Can i use the optimate 4 dual, if my bike not use CANBUS system? Thanks!

@OptiMate Жыл бұрын

Yes, the OptiMate 4 Dual Program has a standard program to charge directly to the battery. To switch the programs: kzfaq.info/get/bejne/h8igedRjv5-teIE.html

@kennethgeary618 Жыл бұрын

Do I need to remove battery caps when charging on bike

@OptiMate Жыл бұрын

Hi, if you use our permanent battery cable (O-01) please remove the caps, but once you install the permanent battery cable you can put the battery caps back on. When using our emergency battery crocodile clips (O-04) you must have the caps removed while charging.

@manguiliuta4896 6 ай бұрын

Hello, I have an optimate 2 and the multimeter shows that the battery has 12.35V. I connect the charger and the yellow light stays on for 2 minutes, then it goes into maintenance mode, shouldn't it charge more and then go into maintenance mode? Or 12.35V would be enough for optimate 2 to see that the battery is charged. It is a minimum voltage limit in which the charger shows me that the battery is charged, for example the maintenance mode is 12.3-12.7V. I have another charger and if the battery reaches 12.35V, it charges up to 12.7 and then enters maintenance mode.However, after 24 hours when it is connected to the Optimate 2, the battery remains at 12.35V if I measure it with a multimeter. I expected that after 24 hours it would show at least 12.6V

@OptiMate 6 ай бұрын

Hello! What battery do you have?

@manguiliuta4896 6 ай бұрын

I have an exide ETZ14BS 12V-11.2Ah battery, probably AGM technology

@OptiMate 6 ай бұрын

Please complete the contact form on our website: optimate1.com/contact/ Our dedicated team will be happy to help you!

@shamalanon-time4209 2 жыл бұрын

Hi. I have been using optimate 3sp with much joy for 12-14 years now. looking to buy 6 select which is not avaiable where I am. however, I have a chance to buy the older version of the 7 select ( non gold series ). my objective of buying this is so that my 2 cars 60-80Ah can be charged faster. will it still be safe to use on my 2 motorcycles ? the big bike is 10 ah, smaller is 7 ah. i read before that ideally, the AH should be divided by 10 for the correct charge amps. if i have this verification that the older 7 select can do this via its ampmatic, then I can proceed to buy. by the way, Is TIM still working with you guys ? Kindly convey my warm regards if so. Please also ignore the attached file. Thank you Sham

@OptiMate 2 жыл бұрын

Yes, it's safe to use on your motorcycles! The older OptiMate 7 Select has the Ampmatic program, but ONLY select the 14.4V program for your motorcycle batteries. Tim is enjoying his well-deserved retirement.

@markmccrystal5773 3 жыл бұрын

Bought the 12v to 12v Charger, from the UK Distributor ProBike, and it stopped working after a few months, and very little use. Sent them an email, and they would not respond. So contacted parent company, Optimate in Belgium. They also did not reply, even though under their stated warranty period. Will never buy an Optimate product again, and wish I had known beforehand. Posting here so that others will be able to make an informed buying decision, as these Optimate products are very expensive. Such dishonourable business practice will catch up some day.

@OptiMate 3 жыл бұрын

Hi Mark, I've asked our after sales support to double check if they have received your email. Can you please re-send your message to sales@tecmate-int.com so we can handle this for you.

@joseronaldoarriola4111 5 ай бұрын

Can i charge deep cycle battery with OPTIMATE 4 ?

@OptiMate 5 ай бұрын

We have a specific range for deep cycle batteries: optimate1.com/product/om5-612v optimate1.com/product/om6-1224v/ optimate1.com/product/om7-1224v/

@VriendRick 3 жыл бұрын

Is there a difference between the Optimate 4 dual program standard or CAN-BUS I know the difference between the connections CAN-BUS or ASE. Your site says the canbus edition has only 8 steps and de standard has 9 steps. Is there a difference in the two defices? or Just diference in the program selected?

@OptiMate 3 жыл бұрын

Both chargers have the two programs. Which program is active is different. To change the program: kzfaq.info/get/bejne/h8igedRjv5-teIE.html

@VriendRick 3 жыл бұрын

@@OptiMate Just to be cristel-clear: There is only 1 optimate 4 dual-program. Only the connectors are different Depending on the connection on the bike. Standard = direct to the battery Can-bus = via the Can-bus connector (Not every bike has Can-bus) But a standard optimate 4 dual-program has both programs. (You can always buy an SAE to Can-bus cable to make a Can-bus connection and chance the program to Can-bus)

@christianyoung47 2 жыл бұрын

What does it mean if the yellow led is flashing?? I'm using the optimate 1.

@OptiMate 2 жыл бұрын

The yellow flashing LED is indicating the low volt SAVE pulse, it's to gently recover the battery to a safe voltage level before the battery can accept normal charge.

@christianyoung47 2 жыл бұрын

@@OptiMate does it usually take a few hours? I appreciate you replying!

@OptiMate 2 жыл бұрын

Yes, it can take up to 2 hours!

@10tigre1010 3 жыл бұрын

Hello, I was interested in the OptiMate 6 Ampmatic but reading its user manual I can see that this charger has the desulphation phase (SAVE) with 16V up to 2 h, and this mode can be activated if the battery is connected into the vehicle. Isn´t this voltage a possible problem for the car electronic system? The car user manual mentions for jump starters and other such devices not to apply more than 15V of current. I would like to have this charger but I´m worried about this high voltage if it ever comes to applied. Could it be dangerous for the car Honda Civic EX-T 2018? Thanks!

@OptiMate 3 жыл бұрын

Hi, no possible danger here. The OptiMate 6 Ampmatic has a full electronic protection feature. SAVE mode will not start when the battery does not need it.

@10tigre1010 3 жыл бұрын

@@OptiMate Hi, thank you for your answer. But if the battery needs the SAVE mode, those 16V would be able to affect the car electronic? Is 16V a safe voltage for the car electronic circuit? Thanks again. Fabio.

@OptiMate 3 жыл бұрын

It will always be safe for the car electronics, but we recommend: If the battery is not strong enough to start the engine, remove the battery from the vehicle for charging. When the engine starts normally, the battery charger can and may always be used for charging and maintenance in the vehicle.

@jayvS1KRR 8 ай бұрын

Hi Optimate people, tried to contact you guys via email/contact page but realize the people checking are probably crazy busy. Do you happen to know if it's possible to connect a S1000RR '23 using the 12V DIN Socket/CAN bus connection? There is almost no information on it and I can't find the connector either. Dealer and BMW neither responded or had useful information. Hopefully you guys somehow were able to connect it to that bike. Otherwise eyelets aren't a terrible second choice.

@OptiMate 8 ай бұрын

No. The S1000RR has the 'standard' CAN-bus that does not include the battery in its control. So the battery cannot be reached via the DIN socket. The best solution for you is the O-01 harness on the battery itself, and then you should check whether you have a LIPO or a Lead-acid battery.

@jayvS1KRR 8 ай бұрын

@@OptiMate You guys are amazing. You provide all the required equipment to easily hook up to almost any bike. Instructions were super easy to understand and I will be recommending the optimate to anyone I can! I don't have to worry about any settings lost or a battery that isn't working in the spring as I can leave it connected. Now... I just have to hope I did the mix for the Stabil correct. :)

@OptiMate 8 ай бұрын

Thank you! 🙌

@paulwitham7957 2 жыл бұрын

If the charger goes back to right green light flashing, what does that mean

@OptiMate 2 жыл бұрын

Hi, the charger is testing the battery!

@brianlund9685 Жыл бұрын

Can I use a optimate 5 start/stop on a volvo xc90 with stop/start with only a 12 ah auxiliary battery and 85ah main battery?

@OptiMate Жыл бұрын

Hi! If the starter battery is a 12V AGM battery, YES, the OptiMate 5 Start/Stop is perfect for your charging needs!

@brianlund9685 Жыл бұрын

I see some sites have the optimate 5 start/stop compatible with 12ah-160ah batteries and other sites have it at 15ah-192ah, which is right and why the discrepancy, confusing when deciding to pick out a charger.

@OptiMate Жыл бұрын

@brianlund9685 Жыл бұрын

I just ordered a optimate 5 start/stop from Amazon, how do I tell if it’s the bronze version. I’m trying to find a distributor in wisconsin with no luck, would love to find a bronze one if the one from Amazon isn’t.

@OptiMate Жыл бұрын

Hi! On the top left corner of the charger decal/sticker - next to our 'OptiMate High Performance Battery Chargers' logo you should see mentioned 'BRONZE'. If not, then it's not the Bronze version. We have no control over which versions are still available on Amazon. You can also see a full list of all our distributors here: tecmate.com/distributors/

@michaelriffey1268 Жыл бұрын

What happens when the yellow light blinks n then goes solid then goes blinking again

@OptiMate Жыл бұрын

Hi, which charger/model do you have?

@asi4391 3 жыл бұрын

Except of the power plug, is there any other difference between the TM250/TM250 v3 EU version and the TM251/TM251 v3 US version of the optimate 7 select?

@OptiMate 3 жыл бұрын

@Asi Like you say: Only the power plug type is different to comply with national / regional electrical safety laws. No other difference.

@asi4391 3 жыл бұрын

@@OptiMate I've used the 14.7 mode to fully charge a seald STAND ALONE sealed 60Ah EFB battery - and then disconnect it from the charger and leave it disconnected for 7 days and i see it become fully self discharged, not able to start the vehicle and even not be able to open the driver's door electrically so i had to use a physical key to open the door. Is this normal for fully charged STAND ALONE sealed start-stop battery to get self drained after 7 days ? What is the difference between AGM, EFB and other deep cycle technologies? Which one if any of these technologies can hold charge most longer? When any LED(s) lights in step 8 - is this means the charging process has finished or there still might be any LED(s) change for as long as the charger is connected to the battery? eg: If the charger shows a yellow LED #7 in step 8, is this a final determination of a problematic battery or it means the charger need more time to revive it?

@OptiMate 3 жыл бұрын

No, it is not normal. This battery is worn (reached its maximum cycles) or there is a cell with damage. It will need to be replaced. Batteries die either through age (reached maximum cycles it can deliver) or neglect. Older batteries need more care. With the new battery make sure it is maintained when the vehicle is not in use, or at minimum charged every two weeks. A stored lead-acid battery will last longest and remain strong for longer if properly maintained when not in use. AGM will hold charge longest and is also the most expensive technology, but needs to be maintained correctly. EFB stands for Enhanced Flooded Battery - it is a better battery than typical standard flooded starter batteries. It is designed to deliver high cranking amps and continuous current, so it is a hybrid starter & deep cycle battery. Other deep cycle technologies - Lead-calcium is often used in deep cycle as this chemistry can deliver a constant current whilst keeping the voltage stable. Lead-calcium is not typically used in engine start applications. Now, one can have an AGM battery that uses lead-calcium technology and that would make it a deep cycle AGM battery. GEL batteries mean the electrolyte is combined with GEL to slow evaporation, but it is also slows peak current delivery, for that reason GEL batteries are not often used for engine start applications. The most important for all lead-acid batteries, when not in use for longer than a week maintain it at 100% and it will last longest and perform strongest.

@asi4391 3 жыл бұрын

@@OptiMate A while after the charger shows yellow LED #7, in step 8, for a stand-alone EFB battery, i disconnect the charger's power plug and plug it again after a few minutes...and about 2 hours later, - step 8 shows both the yellow LED #7 together with the green LED #6 for the same stand-alone sealed EFB battery. Is that means the battery that is first detected as not able to retain charge, is now able to retain charge? For stand-alone sealed EFB battery or stand-alone EFB battery with filler caps - what if both green #6 LED and yellow #7 LED are shown together at step 8? AGM battery that uses lead-calcium technology is better than standard AGM battery? Is such an AGM lead-calcium battery can be charged with OptiMate 7 select? All start stop batteries are all considered deep cycle batteries?

@asi4391 3 жыл бұрын

@@OptiMate A Stand alone seald EFB battery was indicated green 6# LED, fully charged by the Optimate7 select charger, - and got fully drained after reconnection and starting the vehicle, i would appreciate a reply.

@TommoFire Жыл бұрын

Best charger for a Harley Davidson Fat Boy??

@OptiMate Жыл бұрын

The new OptiMate 4 Quad Program is our best battery charger for your Harley (or for any other motorcycle): kzfaq.info/get/bejne/fbZymtSLtL2zhWw.html

@mateuszo6806 8 ай бұрын

is it realy safe remain connected battery to the scooter and then start the charging ?

@OptiMate 8 ай бұрын

Yes, it's really safe! An OptiMate charger can remain connected 24/7 without the risk of overcharging. You can charge the battery while it is still in the vehicle, or you can remove the battery and charge it on the shelf. Both practices are completely safe.

@mateuszo6806 8 ай бұрын

@@OptiMate thanks for the answer, so it is totally safe, and no chanse to destroy electronics in motocycle? motocycle electronic can be connected to battery during charning ?

@OptiMate 8 ай бұрын

It's completely safe!

@sural89 Жыл бұрын

why my voltage constantly varying between 13v and 14v during charge ?

@OptiMate Жыл бұрын

Hi, this is normal. It's the absorption pulse to balance the cells. After this step is completed, the voltage will be 13.6V.

@sural89 Жыл бұрын

@@OptiMate ok thx

@OptiMate Жыл бұрын

You're welcome!

@hugojlsantos 3 жыл бұрын

Hello I have one question. Optimate charges do not have a force mode when battery is very low? I think I already see a video on KZfaq to the force mode start. Tanks

@OptiMate 3 жыл бұрын

No, it's not a force mode. OptiMate battery chargers have a save mode and can save your dead flat sulfated battery from as low as 0.5V. You might mean this video: kzfaq.info/get/bejne/Z752hJV82pu5fYE.html

@hugojlsantos 3 жыл бұрын

@@OptiMate tanks. Yes I made some confusion.

@hugojlsantos 3 жыл бұрын

@@OptiMate just bought OPTIMATE 5 start/stop charger. Tanks

@tomryan1614 3 жыл бұрын

Why would my optimate 7 select totally discharge my battery ?

@OptiMate 3 жыл бұрын

Hi Tom, can you give us some more details? About your type of bike, the accessories on it and about your battery?

@africano39 3 жыл бұрын

the # 6 keeps flashing after a while...battery at 12.3 what gives?? new battery from 2019 thanks..: have the optimate 4s 0.8A.

@OptiMate 3 жыл бұрын

The battery is not holding sufficient charge. If your battery is still connected to the electrical system it supports, the red LED #6 may be signalling a loss of current through connected wiring or 'always on' current-consuming accessories. Disconnect the charger and then reconnect after a while. If your battery isn't connected to the electrical system, the red LED #6 may be signalling that one of the cells is damaged. Then the charger can't help it.

@africano39 3 жыл бұрын

@@OptiMate Purchased a new battery.... charged it out of bike as well..no go

@antoniogiannuzzi1965 2 жыл бұрын

il mio modello è il TM 350 non riesco a trovare recensioni in italiano,potete aiutarmi ?

@OptiMate 2 жыл бұрын

For more information about the TM-350, please get in contact with our Italian distributor Società Generali Ricambi, Bologna

@bobedmunds3595 2 жыл бұрын

I have a solid red light.What does that mean?

@OptiMate 2 жыл бұрын

A solid red light in the OptiMate test light indication means that your battery is flat. Which charger are you using?

@jefferystamaria4646 9 ай бұрын

When too many questions needed to be answered...then there is a requirement to keep things simple.too many lights akin to paying a visit to the disco.I

@OptiMate 9 ай бұрын

Thank you for sharing your thoughts on the video. We understand that simplicity and clarity are important. We strive to strike a balance between providing detailed information and keeping things simple. If there are specific aspects you'd like to see improved or if you have any suggestions for a different approach, please feel free to let us know. We appreciate your input, and it helps refine our content to better meet the needs of our audience.

@petebusch9069 Жыл бұрын

Now tell us what the lights mean right on the charger verses having to look it up in the book. This is a HUGE fail on your part leaving most of us with a tool that we have no idea how to use, NOBODY is going to keep the manual with the charger at all times.

@OptiMate Жыл бұрын

Hi! On our new chargers we've chosen to use a universal color code for the test light indication as found on the OptiMate 4, 6 & 7 (on the right side of the charger display) to indicate the battery's health: GREEN = healthy battery, YELLOW = the battery needs charge, RED = the battery needs charge immediately. kzfaq.info/get/bejne/o7iJf5Retdzbiac.html For each charger we've mentioned the charge programs - '12V' for a 12V charge program, '24V' for a 24V charge program etc. - above/below the LEDs - on the left side of the charger display. Once a selection (for our chargers that require you to make a selection, otherwise it's all automatic) has been made, charging starts automatically and you'll only have to wait for the green test light to turn full on. You can follow the charge progress as the battery level is indicated next to the LEDs in the middle. If charging doesn't start automatically, we recommend to have a look in the manual. Our manuals are also available on our website optimate1.com: Just check the 'documents' tab of your charger.

@petebusch9069 Жыл бұрын

@@OptiMate I have to say I'm still confused. There is no universal code for light colors or flashes and ALL electronic devices need to stop doing this. If there is a light, then there should be a word on it or next to it describing what it is. If you can do this it will make your product much better. BTW, other than this your chargers are great.

@OptiMate Жыл бұрын

We used the universal color code for traffic lights because we make chargers mainly for motorcycles and cars. When it comes to the vehicle, with a fully charged battery (green light) you're good to go. There is also a 'tick' symbol below the green test light to emphasize that the charge retention test was 'positive'. RED light means 'stop/don't drive' (because the battery needs to be charged) and there is a 'warning' below or next to it to emphasize this. However, we appreciate your feedback and are happy to hear that you love our chargers.

@petebusch9069 Жыл бұрын

@@OptiMate Just trying to give some consumer feedback for future development. BTW, all electronic devices these days are confusing as hell, this is your opportunity to change that. Dropping the universal thing is the place to start, nothing is universal and everything is very specific creating the need to label each LED and button.