This vid is still only one in ospf loop prevention on youtube. Thanks again man!
@ccnpseth45635 жыл бұрын
Thabk you Thats why i started my channel
@bog56205 жыл бұрын
i don't usually comment but you nailed in 2 minutes. i spent 3 days searching answers on YT and google, to questions like "why is mandatory to connect everything to area 0, why non backbone ABRs are not advertising networks or why ospf behave strange if you don't use the standard area 0 topology" everyone uses the standard to prevent loops. lol but none gives example of loops so people understand this protocol. thanks and good luck.
@martysdomain2 жыл бұрын
This is a great demonstration of OSPF and virtual links.
@leoxu36205 жыл бұрын
from a CCIE view, it is a great video! I guess one thing is SPF will guarantee loop-free in area. then inter-area is done by leaf-spine-leaf topology.
@ccnpseth45635 жыл бұрын
Yes, the thing about OSPF is that it relies on area 0 as a transit area. Basically, if you are not Area 0 and a router is not routing you through area 0, then you cannot go through that area.
@justmeva11 ай бұрын
It was a bit long, but it was loaded with a ton of information - thank you.
@humayunakhtar21164 жыл бұрын
For the first time ever i'm ale to get this topic . Thank you very much
@MrAbapper4 жыл бұрын
"Abrs will accept and use type 3 lsas learned from non backbone areas if it does not have a full adjacency with area 0"? What u mean? Third slide, u just said abrs will not use lsas from R3 because R3 doesnt have full adjency to area 0????
@grahammccann85542 жыл бұрын
Hi CCNP Seth, Thank you for taking the time to make this video
@heribertorios2 жыл бұрын
In addition to virtual links you can use Gre tunnels to connect R3 to Backbone area. Try it just for fun. Thanks for the video. very good explanation.
@jeremyxia35952 жыл бұрын
Really good content, helped me to review these topics
@DaughterOfRnbSoul7 жыл бұрын
Hey man thanks a lot ! I just recently passed the ICND1, and I knew how ripv2 avoids loops using split horizon and how EIGRP avoids loops but I never really understood how OSPF avoids loops :O
@ccnpseth45637 жыл бұрын
DaughterOfRnbSoul you are welcome, it was a mystery to me as well but then I found it so I decided to share it
@kosmonautofficial2962 жыл бұрын
Interesting video thanks!
@ahmedmagdy11185 жыл бұрын
Thanks a lot for this informative video, I was confused before watching that video. Thanks again :)
@MissFatalKisses7 жыл бұрын
Thanks for this! I've been looking for a good explanation of OSPF loop prevention =)
@ccnpseth45637 жыл бұрын
MissFatalKisses you're welcome.
@kashifrana67986 жыл бұрын
Great explanation !
@ashay7106 жыл бұрын
As we can see R1 learns about 5.5.5.5 from R3 but i guess its not using that info for path selection as it has a lover sequence number
@tayoskeeper4 жыл бұрын
Nice video! You must be CCIE nowadays, for sure 👌🏻
@georgesmith30222 жыл бұрын
So just adding a loopback to area 0 makes the router ABR?
@ajeyganesh7843 Жыл бұрын
very helpful :)
@sp3ktr34 жыл бұрын
What If: area 1 is a loop that connects to two Different area 0 ABRs and then you have a dropped area 1 link that splits area 1 in two. How do you prevent dropped traffic between the two halves of area 1.
@ccnpseth45634 жыл бұрын
So you can have multiple areas w the same number, the concept is that routes from an area must transit area 0 to get to another area regardless of the number, even if area 1 is split
@sp3ktr34 жыл бұрын
In my experience it breaks the Routing. At least with route summarization. The fix for me is two gave two links between the ABRs, one as part of area 0, and the other as the other area.
@DileepYadav-cn3zt6 жыл бұрын
You nailed it man
@adheipsingh17977 жыл бұрын
thanks for the video man , great video
@mohammedazarudeen79445 жыл бұрын
How is loop is prevented in inside a area.i mean intra area loop prevention
@ManojKumar-19857 жыл бұрын
This is an exact explanation by petr lapukov
@ccnpseth45637 жыл бұрын
Manoj Kumar it is, I needed to remember this, so I decided to do a video