Outboard Engine Rebuild

Рет қаралды 48,224

Fixin' and Fishin'

4 жыл бұрын

This is a video of the rebuild of a 1999 BF50A outboard boat motor. Enjoy

Пікірлер: 54

@lodollar23 Ай бұрын

Would've liked to have seen a long build on this one!

@Goearthtour 3 жыл бұрын

Wow so much work. I have the same engine and I was worried about a simple carb rebuild.

@bimber122 2 жыл бұрын

Great job, great fit of all parts ... wish I had a mechanic close to my place of residence ... wish you a lot of good health in the new 2020.

@andrewp1308 3 жыл бұрын

Nice work mate! Gotta be the best carbed bf50 on the planet I reckon. I have a 2004 bf40, these old Honda's are awesome motors!

@markadams3047 8 ай бұрын

That's cool I've always wanted to rebuild an engine.

@IDOLIKIofficial 3 жыл бұрын

Holy shit, that engine went through stuff. Good work on rebuilding it, looks as new!

@fixinandfishin8580 2 жыл бұрын

Thank you very much! The result of many hours of hard work. It has been such a good motor.

@funkart2011 Күн бұрын

@@fixinandfishin8580 do you build boat motors for people ? i have the same motor and need mine rebuilt or repaired

@andreialexeev473 3 жыл бұрын

Excelent job! You are a great mechanic!

@fixinandfishin8580 3 жыл бұрын

Thank you so much!

@Vade1313 8 ай бұрын

Lots of work, great job!

@stevesnell6660 Жыл бұрын

Amazing work fella

@haigalo 3 жыл бұрын

great video, thumbs up

@raifordrucker7113 11 ай бұрын

Looks great I’m rebuilding a 25hp tiller handled outboard for friend of mine right now and all three cylinders have really low compression.

@TONYCOOLSFISHING4X4TOURING 3 жыл бұрын

Great work guys lots of hours hard at it CHEERS.

@johnathankeough3027 Жыл бұрын

Good work and well done mate

@marklaflamme7160 2 жыл бұрын

I’m almost done doing the same thing to the same motor. Looks good! I hope I get the same results

@carloslimalima8401 Жыл бұрын

oh my God!! what a show, I have no words. is it possible for me to change my bf 40 hp to a 50 hp? if so what do i have to change? a big hug from Portugal

@bbg1108 Жыл бұрын

정말 작업을 잘 하십니다. 존경 합니다.

@salvadorrivera6350 7 ай бұрын

AMAZING VIDEO THANKS SO MUCH

@SoBoring136 Жыл бұрын

Lucky Daddy is around

@hawaiiansoljah4u 3 жыл бұрын

Nice beautiful work

@fixinandfishin8580 3 жыл бұрын

Thank you so much!

@Rocheman79 3 жыл бұрын

@@fixinandfishin8580 where did you get the parts? We have a 1998 bf40 and it has low compression on all 3 was it hard for you to find piston rings?

@kennys3985 4 жыл бұрын

Nice job. Are you looking to rebuild more? I have a honda that needs rebuilding.

@kylesummers4769 4 жыл бұрын

Nice rebuild. Like the new channel name. Keep up the good work! And the guy on the jet ski needs work on his jumps.

@simontall5134 3 жыл бұрын

awesome

@MrHarryson1985 3 жыл бұрын

Please do an in-depth carburetor rebuild video for this engine.

@ArnaudDeSmedt 2 жыл бұрын

Very nice work and thanks for sharing all this work with the rest of the world, this is very helpful! I am also working on a BF50A and i have one little question regarding the primary gear case gasket and the oil pan gasket, when mounting the new gaskets must i also add a little bit of gasket sealant paste on them or can they go in without ?

@fixinandfishin8580 2 жыл бұрын

Thank you very much for your comment! I didn’t add any gasket sealing paste to the new oil pan gasket between it and the gear case and it has worked fine. One spot I had to go back and add some was on the head gasket. I had a few drops of water coming out around the new gasket. I went back with a non setting gasket maker on the head. I pulled the head back off and applied it between the gasket and the mating surface and it worked like a charm.

@philipmajor2729 4 жыл бұрын

If you killed the music and said something it would be a lot better. other wise good job.

@joemcky1 3 жыл бұрын

Cool job. I just threw the bottom cylinder rod through my crankcase cover on my 1998 Bf90a. The motor didn't stop running but I shut it off, with few options restarted. I was alone on a big lake in November near dark in Maine...brrr. I knew of nobody who could come and help me. I had no kicker and was 1+ miles from shore. I started and idled in. The overheat alarm would sound when over very slow but would stop sounding at dead slow. Is it possible to repair? Most likely the lowest cylinder wall is scored, the crank cover has holes, maybe the crank has chunks removed? But it still turns over easily. Is it a Gonner or should I take it apart?

@fixinandfishin8580 2 жыл бұрын

Anything can be fixed. You would have to find out what the parts cost and see if it is worth it to you to fix it. It might be pricy to have someone do that. If you do it yourself, it may be an option at that point. Goodluck John

@mickaelcharnelet8584 Жыл бұрын

Good job from france i've question do you have owner manual in pdf or something like that thanks a lot and take care😊

@uncletony3025 Жыл бұрын

What kind of power is that motor pushing?

@mohdfakir8436 3 жыл бұрын

What valve clearance for this engine...

@andrewsmith9980 3 жыл бұрын

Any interest in rebuilding mine? What area are you in? Thanks

@johngillings2102 3 ай бұрын

Did you put silicone between the block and oil pan?

@carloslimalima8401 Жыл бұрын

oh my God!! what a show, I have no words. is it possible for me to change my bf 40 hp to a 50 hp? if so what do i have to change? a big hug from Portugal

@crankingtanks7 3 жыл бұрын

OH WOW, how long does a rebuild usually take?

@fixinandfishin8580 3 жыл бұрын

A little over a month! Some of the days were spent waiting on parts to get here. A bunch of work went into it over that month. Thanks for watching Damian!

@anthonyhardwick4712 2 жыл бұрын

What are you tatten ‘ in the rods down to specs and the block specs

@lanemcalister3586 Жыл бұрын

About how much did it cost you to rebuild?

@wassawbound2926 4 жыл бұрын

How long did the total build take?

@fixinandfishin8580 3 жыл бұрын

The motor was off the boat and back on in a little over a month. I worked on it during weekends and a little before work. Really fun build with a lot of work into it. Thanks for watching.

@kinkywinks 3 жыл бұрын

I didn't see the new parts, what did you have to put in it and what were the approximate hours on it?

@fixinandfishin8580 3 жыл бұрын

I had a table laid out with gaskets other pieces to put it back together. The wear on the engine components was minimal. Just had oil leaks where the main seals were. That was my main problem along with some corrosion issues on this one.

@kinkywinks 3 жыл бұрын

@@fixinandfishin8580 Thanks for the reply

@guglielmodicarlo4139 2 жыл бұрын

great video nice work, could have done without the intense music, but .......lol

@IDOLIKIofficial 3 жыл бұрын

What is that machine at 1:00?

@weeeves 2 жыл бұрын

Sandblaster

@jaredmayer3960 3 жыл бұрын

If this is a legit rebuild there was no where near enough care put into the cleaning of the internals...

@wc7480 15 күн бұрын

i cant believe you wasted your time putting that beautiful motor on that crappy boat

@shannonwilliams601 Жыл бұрын

This is a pretty good video but I think it's more of an engine freshen up it's definitely not a rebuild didn't replace the crank didn't even really clean the carbon off the Pistons didn't replace the wrist pin bearings or wrist pins didn't replace the Pistons didn't home a cylinders this was kind of just more of a freshen up