Рет қаралды 10,055
My dear brother, try to benefit from what is appropriate for you.......
Details about installation and some specifications.
The Deye 50kw inverter has two battery inputs, each input has a dedicated BMS, for example
Battery 1/BMS 1
Battery 2/BMS 2
It works on a voltage starting from 160V to 800V, especially for the battery entrance, and the installation is done in a manner +_+_, as is clear to you, the battery is 51v, for example, until the last battery is installed and the output is 450V, depending on the number.
Solar panel input max 65kw
PV/1
PV/2
PV/3
PV/4
Each of them has two entrances at 1/2/3/4
At each of these entrances, 30 solar panels measuring 550w are installed, and the division is 15/15, that is, PV/1.
PV/2
PV/3
PV/4
The inverter is loaded to 80%
The value of the panels is measured at 80%.
Batteries are discharged 85%
The battery charge calculation is taken into account separately from continuous consumption and loads
We give some special ideas in our work on the ground and we do not impose anything on others in their implementation and we do not promote any brand. Try to benefit from the thing that is suitable for you or some ideas within the composition if it is suitable for you on the ground of your reality. With my regards to you...... ......
Follow Petrapower Energy channel on WhatsApp: whatsapp.com/channel/0029VaAq...
1- A detailed explanation of the installation of Deye 8kw with all accessories
• Solar installation + @...
2_ Explanation of connecting the Parallel Voltronic 8kw system
• هاذا الفيديو مخصص لكل ...
3_ Video explaining how to adjust the charging settings in the Deye inverter
• تعريف برمجة الشحن الخا...
3_ How to identify a lithium battery through the BMS 8.7kw / 10kw / 12.5kw / 15kw
• شرح مهم جداً.♥️ كيف يم...
4_ How can you activate Smart Load for me to protect the battery?
• تعريف برمجة الشحن الخا...
5_ Installation of a three-phase elevator system for an 11-floor Felicity Inverter 15kw
• تركيب نظام أنفرتر ثلاث...