I’m so glad I found your website and videos before I do my first ever project! Man there are a lot of people giving the wrong advice. Can’t wait to get started with my Cricut Maker, Easypress and what will no doubt soon be massive Siser stash! :D

I will testify that this is truth!!! I totally ruined a T-shirt by getting my materials confused and I pressed too high for too long...but I LEARNED and that’s valuable!

Been trying to tell people this all week. Thanks, Joe.

This is exactly what I needed!! 🙌

Literally me over the weekend 😩 this is definitely the video i needed

I learned more in 4 minutes than I did watching a bunch of videos. Thank you. Plus, the host is HOT!!!

Thanks for the info! Very helpful!

We use about 175 celcius for 15 sec and medium/high pressure because we use a teflon sheet and are having the best success with that (using the same heatpress as seen in this video).

Thank you, thank you, thank you! I am new to this and had no idea what I was doing. So you can imagine that I have ruined many shirts and vinyl.

Thank you!!!

So glad I found this video. I'm not going to lie I hated yalls vinyls 🥴 But I take it back now! I saw this video and realized that you guys were totally acting like me in the first few seconds lol. I thought that if I left the heat on longer and pressed hard and then threw it in the heat press machine that my vinyls would stick. And they always peeled off even before the first wash... I didn't know that you could damage the adhesive... Lol I hope you guys accept my apology 😂😂😂😂

Thank you! Great info

On a press that is used for clothing and fabric which fabric setting would the temperature range you provided be? Cotton, Wool, ...

What settings do you recommend on an EasyPress 2 for applying Siser HTV on stained wood?

My friend your video is good, very clear.

Oye mi niño, tu vas a ir a Las vegas, este octubre 16,17,18,19 y 20. 2018 ?????

Yeah so I did get too much pressure on a baby shirt I did yesterday. I dislike greatly this whole medium, light, hard pressure thing. Give me a numeric value and I'll buy equipment to measure it. I adjusted my heat press to what I thought was medium and didn't repeat the paper test that everyone claims is medium pressure ... still subjective btw ... and I see the glue from my top layer pressing out onto my bottom layer. Do I need to trash this baby shirt or is it likely it will hold for the 1 or 2 wears babies get out of clothes this size before growing out of them? 305* for 15 seconds easyweed on easyweed with a 5 second tack for my bottom layer before the full press on the top layer.

Are there different conditions when working with POLYESTER. I am referring to SCORCH MARKS. I've watched the STAHLS videos and they all lead to purchasing a new machine with the LOWER Platen heating element. HELP...!!!

THIS IS SOOOOO GREAT. And you're super cute lol

I expected to see some over pressed items.....thanks

How can you tell if you applied too much heat to a tshirt?

Thanks for this. I bought a Cricut Easy Press after winning an HTV pack from your Facebook page and their instructions say front AND back. Which I thought seemed like too much, but maybe that was for their vinyl. Or they are giving bad instructions??? Anyways, can we have more tutorials on tips for pressure using the EasyPress? I thought we need to see the impression of the fabric through the material, so have been extra pressing. I've only made shirts for my kid and myself, so not a big deal yet. Still learning!

I have a large heat press but just how do I know if the pressure is right? I would love to know the answer to this. So far, I am just guessing. ugh

I thought we'd get a way to fix the mistake of over pressing!!! Great info anyway.

Just found you, thanks for clearing things up

Can We use regular transfer tape to the htv or do we need a special kind of heat transfer tape ?

Which size heat press do you think he’s using? I’m trying to figure out which one I want, 9x7 or 10x12!!!!

I just printed out the PDF on application. It shows the htv stretch as requiring 320° for 20sec and a firm press. I'm using a Tusy press for application onto a Bella canvas shirt. I'm still having letters peel. Any tips for this issue. Thanks👍

Hello, I have a question. I recently tried HTV on a shirt for the first time, but the vinyl came out wrinkly in certain areas. Do you know what could have caused this?

after applying the vinyl to cotton shirts is there a suggested waiting period before washing the shirt?

I purchased a svg . A portion of the number adheres and a part doesn't . How do I get it to stick so when I wash it doesn't peel?

My question is regarding Reflective heat transfer sheet. The problem is once its washed, looks like the print is loosing its reflective ability (NOT peeling off, print area is intact still) Is it due to washing conditions or it isn't pressed properly? I think I press it like 3 to 5 sec, should I press for 10-15 sec to avoid it? Or its just due to wash?

Can you show what htv looks like if overheated? Mine doesn't stick all the time and I can't tell if it was overpressed or under.

Yesss ❤

Is a second press required? i have been doing a second press for 10 seconds after peeling at a first press of 15 seconds.

I over heated my holgraphic, it's buckled now. Can i fix it or peel it off ?

What heat press do you recommend.

What do you do if half of the logo peels fine but then the last part of the vinyl is pulling up??

If the adhesive oozes out a lil will it fall off when you wash it?

Why is my HTV so stiff? What HTV you recommend for a soft, stretchy almost rubber feel? The one I’m using (easy peel) feels really stiff.

Help! I have messed up multiple shirts. I applied htv for 10 sec. At 305 with a cricut heat press and my htv looks like it sumgged. Idk what I'm doing wrong.

Yup did it the other day with my second time doing it lol I have purchased an easy press 2

I don’t know why it can’t just be written on the paper insert that is wrapped in the roll. It says absolutely nothing about temp and that makes no sense.

Hello. First, thanks for this video. Second, please tell me how can I prevent my HTV from buckling once I put on my shirts. I use my easy press, stretch htv, a portable table and press pad. It presses beautifully but once I put on the shirt it buckles around my breast area. Should I stretch out the shirt first? Thank you kindly in advance.

Hi i unfortunately got the white around my design is there a way to remove it

I wish I would have seen this before I did my shirts. Unfortunately, I was the guy at the beginning. :( I’ve been using Cricut HTV and there you have to press at 330 minimum so I assumed it was the same thing

Do you recommend to start over if I over pressed a shirt?

Any reason the vinyl sticks but the actually plastic won’t peel???

I can't seem to transfer metallic HTV well

That's me!!!!Lol

is a teflon sheet even worth it?

Pineapple!!!!! 😯😍🍍

Please show some wash results using the different machines to validate your claims. I've seen testing and wash results from other companies that provide different information then what is in this video.

It should be called the application zone!! 😂 😆 😝 just sayin!

What it you have a cheap heat press

LOL Yes ---- Guilty!!!!

Was expecting a transfer to a shirt

You have great info but u need a new intro lol

65% polyester/35% twill weave I am having HTV issues with this blend on aprons not sticking (..... Can you suggest the vinyl I should be using? I was using easyweed everyday iron on strong blend