Buying Offroad Rims and Tires after over a YEAR of Research

Buying Offroad Rims and Tires after over a YEAR of Research | Wheel Size and Offset EXPLAINED!

Рет қаралды 55,330

Күн бұрын

I finally bought Overlanding Rims and Tires after over a YEAR of Research. After running all terrain BFG KO2s and and the TRD Pro rims for a long time, I decided it was time for a change. The BFGs were aging so it was not too long before they would need to be replaced. I decided to go with these awesome Relations Race Wheels rims and Yokohama Geolandar 003 M/Ts. Check out the video for the full review and reasoning!
RR6-H: www.relationsracewheels.com/c...
Conical Locking Lugs: www.relationsracewheels.com/c...
Beadlock Ring: www.relationsracewheels.com/c...
Protection Ring: www.relationsracewheels.com/c...
Yokohama Geolandar 003: amzn.to/2XeO7NQ
_________________________________________________________________________________________________
Instagram: / overland_engineer
Patreon: / overlandengineer
Website: www.overland-engineer.com
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
DISCOUNT CODES:
MyMedic (21%): OVLDENG21
LASFIT (10%): OVLDENG10
Autonomous (Varies): R-ca5d0e
Midland (15%): OVRLNDENG
_________________________________________________________________________________________________
Some gear I use:
GSI Non-Stick 12" Pan: amzn.to/32GikFe
Jetboil Flash: amzn.to/3gBDjB8
MSR Backpacking Stove (Closest new thing): amzn.to/3sH4cpS
Yeti 10 Oz Rambler: amzn.to/3sJUH9t
Yeti 35 Oz Rambler: amzn.to/3ayktHv
Smittybuilt 2781: amzn.to/3tK6fdP
Midland PPG1000: alnk.to/4Mtwmtb
Midland MXT275: alnk.to/btgG7un
Midland Radios Discount Code: "OVRLNDENG" for 15% off
Midland 6dB gain antenna: alnk.to/aAGTdqH
Midland 6dB gain mount:
Rago Fabrication Dash Mount: www.ragofabrication.com/colle...
Rago Fabrication Driver Side Antenna Mount: www.ragofabrication.com/colle...
Ethernet Passthrough: amzn.to/3sqCVZk
OEM Light: amzn.to/3sCtciY
_________________________________________________________________________________________________
4Runner Build Links:
Grill Lights: cartrimhome.com/Black-Style-L...
LFD Cross Rails: www.lfdoffroad.com/catalog/toy...
LFD Wind Screen: www.lfdoffroad.com/catalog/toy...
Gloss Black Vinyl: amzn.to/3iokqk1
Apache Storage Box: www.harborfreight.com/9800-we...
Traction Boards: amzn.to/3nY7VN7
Mattress (Full Size): amzn.to/35PTdla
APEX Badlands 12k Winch: www.harborfreight.com/apex-12...
C4 Fab Lo Pro Bumper: c4fabrication.com/products/4r...
OME 3" Lift: ok4wd.com/old-man-emu-3-suspe...
---I have 2887 Front Springs, Rear 2898 Springs, 90010 Front Struts, 60080 Rear Struts, Stone Guards, and 5 mm Driver Side Lean Spacer
_________________________________________________________________________________________________
The Desk I use:
Standing Desk Discount Code: R-ca5d0e
Autonomous Smart Desk DIY Kit: rb.gy/61ouoy
_________________________________________________________________________________________________
Disclaimers:
-only products specified in this video or a previous video have been supplied though a sponsorship or partnership
-some links may be part of an affiliate program to help support the channel.
-the music I use: www.epidemicsound.com/music/f...
0:00 - Intro
1:16 - My New Rims & their Features
4:04 - Sizing Explanation
13:34 - Why I Chose my New Rims & Tires
20:22 - Outro

Пікірлер: 193

@Hobbies4Hire 2 жыл бұрын

That was the single best explanation of tire size and offset I have ever seen. So glad you went with the bronze. Too often, people want to murder everything out and go with a black rim, but I find that if you do that, it makes the wheel and tire disappear into the wheel well. That's why I've always liked either the bronze or a matte grey depending on the color of the vehicle. Yours looks great!

@OverlandEngineer 2 жыл бұрын

Thanks a ton!

@justinm.791 2 жыл бұрын

@Hobbies4Hire Agreed!

@BrandonBaecker 2 жыл бұрын

Yeah. I love the gunmetal grey of my Alphas on my grey truck!

@justinneilsonn2665 Жыл бұрын

My 4runner is dark blue with black trim. Im not sure the brown would go with it.

@vincesmith764 7 ай бұрын

Shiny wheelz are coming back.❤

@WW-wf8tu 2 жыл бұрын

I am not a noob to the wheel/tire world, however, I have never seen anyone explain things better. The visual explanation with the drawing is what puts it over the top. Most people verbally explain things and not everyones brain processes information as well w/out visualization. Good teaching tool there. Obviously you were paying attention in school from good teachers and have applied that to the real world. And I never knew that the TRD rims that come with the Pro trims were narrow. I have been considering them for my TRD-OR, but not now. Thanks!

@OverlandEngineer 2 жыл бұрын

Thanks! I appreciate it! Yeah it makes no sense to me. The TRD Pro rims should be 8.5" wide...

@lucasr5675 2 жыл бұрын

The professor does it every time! Got the pictures, the math, the basis, he has dissected the problem and then great answers as always. Well done once again!

@blackthebanner 2 жыл бұрын

Just wanted to say thank you for the visual breakdown glad to hear your Yokohamas are treating you well I want to put the same on my sr5 this year so your research is helping me not have to sift through pages and pages of people telling me to get this over that so to speak

@OverlandEngineer 2 жыл бұрын

The forums are never ending...I am trying out some Wildpeaks now but I did not switch because I disliked the Yokohamas. They were different but I am doing research for the channel and for bigger tires :)

@francisngo 2 жыл бұрын

Great explanation and visuals! Thanks for taking the time to draw it out. Downhill and uphill also plays a role. Before getting a body mount chop, I had to make a uturn down hill once and it rubbed hard but uturns on flat road didn’t b

@OverlandEngineer 2 жыл бұрын

Thanks! Good to know!

@rob4f258 Жыл бұрын

Very helpful bro. Im on my 4runner adventure atm and this is very helpful. I was struggling with the suspension and tire info as I didn't know exactly where to start. You broke it all down and I would say this is a good point of reference. 👍🏾👍🏾

@OverlandEngineer Жыл бұрын

Awesome! I’m glad!

@brutoforce4405 2 жыл бұрын

Dude you’re amazing at explaining. Very analytical and thoroughly thought out 👍

@OverlandEngineer 2 жыл бұрын

Thanks!

@HelptheBroncos 2 жыл бұрын

Thank you. This is everything I needed to see and hear. Best explanation I've seen.

@Treetopflyer777 10 ай бұрын

I concur with this excellent demo. For reference I have 285/70/17 Mickey Thompson ATs on SCS Ray10s -38. I needed a fairly aggressive front mod (not a viper trim however) as well as BMC,, needed to trim the rocker caps quite a bit, about half inch from the bottom of the rear fender and had to fold the pinch welds behind the rocker cap. Other than the BMC, the other stuff was easy to DIY. Maybe s 20 min process but it still was required. Just an fyi for anyone looking at -38

@justinm.791 2 жыл бұрын

Great video, loved the depth of the info. That wheel/tire combo looks kickass!

@OverlandEngineer 2 жыл бұрын

Thanks!

@Taco-Java 6 ай бұрын

Excellent explanation on tire size wheel size placement and offset!! Well done sir!

@osmarorozco963 2 жыл бұрын

fantastic video! hats off to you for IMO the best explanation of fitment with respect to offset, bm chop etc.. nailed it bro!! Really great looking wheelset on your rig! Looks kickass!🤙

@OverlandEngineer 2 жыл бұрын

Thanks!

@Louie-bn9lk 4 ай бұрын

Great job on explaining offset's and tire size. I run the same Yoko's on my 1st gen Taco, and after this video I may even buy some for my 5th gen 4rnr along with new wheels! Once again great job....

@Bay_32 Жыл бұрын

Extremely helpful and simple video. Thanks man!

@lierbag655 2 ай бұрын

Great video! Well done. Very helpful! Thanks for sharing. Nice rig!

@Hesirontuff 6 ай бұрын

awesome video!! this helps a ton. and also I've been looking for a good rim that I could add bead locks to and this is amazingly helpful

@OverlandEngineer 6 ай бұрын

Right on!

@rommel-777 Жыл бұрын

Amazing! Thank you for the clarity. Subbed right away. Thank you and God bless.

@sebastianm3403 Жыл бұрын

Awesome video! super helpful and clear explanation, this helped a lot. That 4runner is looking fire!

@OverlandEngineer Жыл бұрын

Thanks!

@eyesea123 5 ай бұрын

Incredible video. Thank you so much! Not what I wanted to hear, but now I know what to look for.

@OverlandEngineer 5 ай бұрын

Right on!

@Isaacimage 2 жыл бұрын

Finally, great explanation ! Thank you Man

@OverlandEngineer 2 жыл бұрын

No problem!

@ZachRuizz 2 жыл бұрын

Great vid and explanation! Love the look

@OverlandEngineer 2 жыл бұрын

Thanks!

@humbertogonzalez3125 Жыл бұрын

⚓ Awesome presentation and explanation🤙.

@wassermutt7805 9 ай бұрын

Bit of an older video, but a good one. One cannot emphasize enough the effect of offset on clearance during turning. You made a good choice with the Yokohama. I am a big fan of the G015 A/T series. I went away from them to the Wildpeak AT3 on my Tundra for a more aggressive look. It's a great tire, no doubt. But it's a heavy tire, I lost over 1 mpg (on a Tundra where you don't have much to give, that's a decent amount). Love the bronze on the black. I have a white one that I am shopping new wheels and leaning bronze as well.

@UniquelyUsAdventures 2 жыл бұрын

Well done! Looks good!

@hahaitsjeff 2 жыл бұрын

You should do one on load ratings, great video on explaining wheels size & offsets btw!

@JeepCherokeeful Жыл бұрын

If it was that important he would have included it...just kidding;(

@CSC1steel 2 жыл бұрын

You are so freakin solid. Don’t stop doing this. You could make a career out of this channel.

@OverlandEngineer 2 жыл бұрын

Thanks! I really appreciate that!

@seandalejackson2525 2 жыл бұрын

We ALL appreciate you Man!!

@OverlandEngineer 2 жыл бұрын

Thanks!

@mrillmakeit Жыл бұрын

Awesome video bro.

@martinleos4208 Жыл бұрын

Any recommendations on what tires to get. I have a black 2022 4runner with trd wheels & im not wanting to lift because I keep my truck in the garage. Yours tires look awesome on yours. Would like something similar that won't rub. Thanks for the awesome content!

@stevep5736 2 жыл бұрын

Outstanding explanation!! Thank you !!

@OverlandEngineer 2 жыл бұрын

No problem! Thanks!

@Treverswain1 7 ай бұрын

Love the WHEELS great video!

@jimclark6883 2 жыл бұрын

I put Falken Wildpeaks on my 4Runner and have been very satisfied with them for the past year and a half.

@OverlandEngineer 2 жыл бұрын

Yeah I have also ran falken wildpeaks, awesome tire.

@stevejordan9567 Жыл бұрын

Those look really nice. I have a black 4Runner and I might have to copy you on this.

@OverlandEngineer Жыл бұрын

Do it!!

@darrenbradshaw124 2 жыл бұрын

Good explication on offset, the rim width being smaller is better at keeping your tires from coming off the bead when aired down! I had the Yokohama’s and they chunked when off-roading in AZ(Rocky) otherwise they looked great.. now have wild peaks, never going back to a Mud! ✌🏽

@OverlandEngineer 2 жыл бұрын

Ah shoot…yeah with some of the slippery snowing conditions I’ve been eyeing Falkens again…I just wish there wasn’t a national shortage and you could get them without a markup…

@craigsmestad6952 2 жыл бұрын

Great Video! I've got a 2018 Off Road Premium 4 Runner. Looking to upgrade to 35 x 12.5" Tires on a 17" Rim. Probably will need a BMC....

@OverlandEngineer 2 жыл бұрын

Definitely! And probably hammer pinch welds to be safe

@Kubanb3 23 күн бұрын

Great! Do you have a video on the subject of Lift??

@alphadawgie3730 2 жыл бұрын

Definitely learned more from this video than I did from researching for weeks elsewhere. Thanks for this!

@OverlandEngineer 2 жыл бұрын

For sure! No problem!

@spelisha 2 жыл бұрын

Best explanation on the entire internet Period

@OverlandEngineer 2 жыл бұрын

Thanks!!

@caryallen9340 2 жыл бұрын

If you want snow tires, I recommend Firestone tires , but only snow tires . There very good and they grab well with no sliding

@rueltividad3923 Жыл бұрын

Hello! Thanks for the very nice explanation. Just like to ask how much does the tire poke out in your set up? Thanks

@iamoutofideas13 10 ай бұрын

I have balancing issues with my current set of KO2's. I tried standard balancing at three different shops, but it was still pretty bad. There is a bit of feedback in the steering wheel at 70mph + that cannot be resolved. I went to the Toyota dealership and did a road force balance and it did make the problem 1000% better than it was with a standard balance. It was also 3x the price of a normal balance job. That's been my experience.

@InGratitudeIam 2 жыл бұрын

Thanks for a very thoughtful presentation on this. It was quite helpful to me. I think the original tire size on the TRD Pro 4Runner is due mainly for gas mileage. Narrower tires weigh less and have less rolling resistance. They also tend to track a little better in snow and minimize hydroplaning. So, it seems the narrow tire is oriented toward performance on pavement and gas mileage. Ironic? Very. I definitely like the way you went on this. I spend most of my time on pavement (sigh) but am giving serious consideration to 275s to avoid all the other things that go along with 285s, and hope gas mileage doesn't take too much of a hit. I might have to go with wider rims, I hope not but I also want to minimize the chance of a bead popping off during an emergency evasive maneuver at 75 mph. Those oblivious blueish-gray haired grannies on the highway can be problematic at times.

@OverlandEngineer 2 жыл бұрын

Hahaha I think you will love 275s. I presume you could get away with stock rims. 285s are on the fence for me but everyone has different comfort thresholds. I feel like wider wheels would be better in snow for more contact points! I can see the hydroplane part but I’ve always heard people like more tire for traction, it just hurts the MPG

@leemasterson6812 Жыл бұрын

I also appreciate to through explanation. Thank you

@4WHEELSHOP4X4 2 жыл бұрын

Ufff It looks great, congratulation for your excelent choice.

@Lifesrad8 2 жыл бұрын

I put a -12 on my 4 runner and stock tire and it was rubbing on the fronts on the mud flaps I didn't want to cut everything up so found a guy to buy then bought a 0mm and it was fine when I bought them.

@Hassi_81 11 ай бұрын

Great video… thanks dude!

@darrylbarger3795 2 жыл бұрын

Great job with tire sizing and offset demo. I have an 04 V8 4Runner and am having to decide on tires as well. I am happy with my ATX Legend Teflon coated wheels never dirty. I'm currently running 265 70 17, FJ size, Yokohama MT unidirectional V pattern tread. I have 45K on them and they are noisy as a MT is but have warn perfectly and I've been very happy with them. Was thinking of going with K02s because I'm really not mudding very often. I really like your choice. 003s. Also looking at X ATs but not 3peak rated. I live in WV and winter is real. Very tough decision. Have you talked to anyone about the X ATs? Also I like your T-Shirt would you mind letting me know the brand symbol.

@OverlandEngineer 2 жыл бұрын

The shirt is merch from Spirit of 1876, a super awesome local overlanding shop in Colorado but they have an online store as well! As far as the X-ATs go I have not heard a whole lot because they seem to be drowned by 3 peak tires like KO2s and Falken Wildpeak AT3Ws. I know people that run both and I have ran a set of used KO2s. From what I can tell is if you get a good set of KO2s you will be happy but there is a lot of variability in the tire manufacturing so sometimes there are bad apples. The Falkens seemed to be better so you are less likely to get a bad tire. Also seems like people as of late think they are better than KO2s. Probably just depends on what you like to run or what previous experience is. The Falkens do have 55k mile limited warranty I believe which may be the same as KO2s but thats better than the X-AT. Tires are always a hard call because its all anecdotal reviews. If these mud terrains are not good in snow I'll be switching to wildpeaks more likely (I live in Minnesota so we get lots of snow and ice).

@stevejordan9567 Жыл бұрын

Great info. Thanks.

@y2kmadd 2 жыл бұрын

Always amazed at how many crevices are in offroad wheels. Why not smoother so they fling mud and dirt off easier?

@lanix17 2 жыл бұрын

Finally someone that explains that the middle number is a percentage of width. Curious if you got adjustable UCAs and if you used Caster to help fit the fronts.

@OverlandEngineer 2 жыл бұрын

Thanks! I did not need any adjusted caster to fit these. I do have SPCs now but they are for the 33+ tires I might be getting.

@G5Hohn 6 ай бұрын

Positive offset vastly increases clearance. I have 32.6” tires in my GX with no rubbing. No lift. No chop. No heat gun massage. Stock GX wheels, +25mm offset. 265/70r18. Mild tread LTX M/S Michelins.

@benherr1361 2 жыл бұрын

Great vid thank you, cheers!

@OverlandEngineer 2 жыл бұрын

Thanks!

@Cuhhhhris Жыл бұрын

Was into the car scene, sold my m3 for a 4runner trd pro just this past weekend. so this helped out tons. Super informative, was this set up with the stock fox shocks? Or did it have a lift kit or diff suspension?

@robertfoster2531 Жыл бұрын

Nice job. Thanks.

@jamesgerboc 7 ай бұрын

Great video. I might have missed this, but what year 4 Runner and did you do any other modifications ie lift kit? I thought 285's were the largest possible without any modification.

@ryanflores2281 2 жыл бұрын

Can you give a long term review on these wheels? Are they forged?

@BrandonBaecker 2 жыл бұрын

Nice Spirit of 1876 tee! I love those guys. Are you in Colorado? I personally decided on 255/80R17s over 285/70R17s for my overland truck and I've been happy with the performance. I went back and forth a lot. Both sizes are great, with different advantages and disadvantages.

@OverlandEngineer 2 жыл бұрын

Same! I’m actually from Minnesota but love Spirit of 1876

@G5Hohn 6 ай бұрын

Minor correction: the first number is section width, which is at the widest point on the sidewall/-NOT the tread width. You will find that tire shape differences cause different tread widths at the same nominal section width.

@dewarner12 Жыл бұрын

This was an excellent explanation of tire size. I learned more from your video than several others I have watched that deal with the same subject. This information will inform my rim/tire size purchases going forward for my Tacoma. Besides understanding this subject, I think I could now explain it someone else. Thanks -

@OverlandEngineer Жыл бұрын

Right on! Glad it helped!

@veteranveteran9915 2 жыл бұрын

This video is absolute perfection!!! No insane loud music, no cursing rap music, absolutely detailed and visual audio and technical explanation of offset that beginner to expert can understand. Absolute perfection just subscribed 💞

@OverlandEngineer 2 жыл бұрын

Right on! Thanks!

@TXprimeFishing13 16 күн бұрын

Thanks for explaining thoroughly. Your Rims 💪🏼 My opinion, I wouldn’t put any tire on my 4Runner that would cause rubbing. I wouldn’t recommend any type of Body Chop either…..Cancels your warranties and could cause potential problems whenever you start cutting things and moving things around.

@JonFox1945 Жыл бұрын

I have a 4th gen v8 4runner 4x4. Do i really need 285/70/17 AT, or can I just get 265/70/17 AT duratrac for off roading ? I have a fuel efficient daily driver but most trails i want to hit on my 4runner are at least 3 hours away, so I'm thinking maybe the stock size would be better for gas mileage despite the main purpose of my rig being used to reach remote camping areas.

@dp1643 2 жыл бұрын

Will a 2 inch spacer lift accommodate 285 BFGs? If not, are there 1 inch spacers and will 275s work? Thanks! Love your channel! Note: I plan to have a slight negative offset if I go with non-TRD wheels. If I go TRD how do you feel about spacers? You mentioned spacers in the beginning of this video but didn’t go into detail about them. Thanks again!!!!

@OverlandEngineer 2 жыл бұрын

Hmm...not sure on 2in for 285s...I would presume 2in would be good for 275s. I always try to remove rubbing from any circumstance even offroad. I think the general rule of thumb is 3" lift with zero offset and 285s. I think maybe a little negative offset with 275s and 2in lift could work but double check forums on that. I currently run 1.25" spidertrax spacers. I do not think I had them installed at the time of the video. 1.25" = ~32 mm negative offset. I think spacers are just fine if they are installed correctly with correct loctite, torque, etc. If it were me I would probably run zero offset TRD or -10 or -12 mm aftermarket rims. I did a lot of trimming and hammering and a body mount chop to fit my 285/70R17s with a 3" lift and -32 mm offset. Negative offset can really introduce more rubbing quickly so be prepared to maximize lift or trim.

@brandoncannon8832 Жыл бұрын

I have a stock sr4 2021 4runner sr5 I plan on getting fox shocks and want to upgrade wheel and tire but don’t want to be rubbing..any suggestions on what wheel and tire size I should get??

@ltatjsallday8709 Жыл бұрын

I'm looking at Black Rhino Chamber 17×8.5 I want to know if -18 or 0 offset is better

@TheBDisme Жыл бұрын

Would you say the spline lugs look better than hex? I see the ones you linked but it for some reason brings me to Subaru spline lugs. Lol

@ruvimyefimchuk1166 3 ай бұрын

What do you think of 17 inch 9.5” wide with +6mm offset for a 4 runner

@scionxb-if6hp 2 жыл бұрын

How do you like the Yokohama tire?is it noisy or good in winter? Thanks

@albertojara6014 Жыл бұрын

Any issues with rubbing when the front suspension articulates over stuff?

@Sami-rp7mf Жыл бұрын

Great video and very informative. Not sure if I missed but what is bead on a tire and is it useful or do we need that?

@OverlandEngineer Жыл бұрын

the bead is the edge of the tire that makes contact with the rim! Not super important information but thats the portion often hard bolted to beadlock rims

@Sami-rp7mf Жыл бұрын

@@OverlandEngineer is there any purpose to have beads? Thanks

@JohnnyReno71 13 күн бұрын

So if I stay with stock 265 or even go 275 and do a -10 off set will I rub or have to do modifications

@user-zv5zl2sv5g 2 жыл бұрын

which part of the U.S. are you in?? Just curious if those Geolander tires will work for everyday Southern California. I just picked up some RRW myself except mine are the RR7-H. Love them.

@OverlandEngineer 2 жыл бұрын

If I lived in Southern California I would totally run geolandars. They are just a little questionable on ice and that’s it

@White_buffalo_4r 2 жыл бұрын

I have also always thought it was strange that the TRD PRO rim is more narrow than the TRD Off-Road rims are.

@OverlandEngineer 2 жыл бұрын

Honestly…really dumb

@RichardTheAsian Жыл бұрын

sorry I know there’s a lot of comments already. I’ve heard that any lift over 2inches should also have a diff drop to correct the geometry of the vehicle? maybe you can do a video to explain this concept to us non-engineers. btw the new rims and tires look amazing!

@OverlandEngineer Жыл бұрын

Thats a good idea! I had a 3" lift without one and didn't have problems. I am glad I have one now. It takes a away some ground clearance but its worth it.

@archiscapes1503 2 жыл бұрын

Did you use any wheel spacers, or just used the offset wheels?

@thegiant573 11 ай бұрын

Did you do an update to these tires?

@FarNorthAdventure Жыл бұрын

How did these end up doing in the winter?

@DuBsTaR_4za Жыл бұрын

Great info with no filler chit chat, thank you. How are the Geolanders doing after almost a year? Noise? Winter performance?

@rebeltake Жыл бұрын

What offset did you get for the rrw?

@Brian-kq3st Жыл бұрын

Maybe I missed it but what offset did you get? Also, I drive a 2018 TRD ORP. I'm on my second set of Nitto Ridge Grappler in 285/70/17 and they have been awesome. I put 75K on the first set.

@OverlandEngineer Жыл бұрын

I got zero but I run a 1.25" spidertrax spacer. I can't remember if I had that in this video or not haha but all over my instagram, thats what I have. 1.25" = roughly -32mm ish

@RoyFJ65 5 ай бұрын

MT G003 are the gbest all rounder tires I have owned so far.

@noahpepin49 2 жыл бұрын

About your rims did you choose -12 or 0? As offset and what does it look like?

@OverlandEngineer 2 жыл бұрын

Tons of photos on my Instagram and I have zero offset with 1.25” spacers

@chadtattrie8629 Жыл бұрын

Did you raise the truck for this wheel rim setup? Was it all stock suspension?

@OverlandEngineer Жыл бұрын

I think people have fit 285/70/17s with a stock lift and lots of trimming. I’ve heard 275/70/17s fit pretty well on stock lifts without much trimming. A 3” lift with zero offset will fit these tires without a body mount chop and minimal trimming. You may be able to fit them with a lot of trimming and no bodymount chop if you get zero offset. The thing with a stock lift and bigger tires is your bumpstops are still OEM I presume so I’d be more worried at that point of rubbing or bottoming out and hitter you fender liner in the top. Just have to do a little articulation R&D haha

@Sammy-db3xj 2 жыл бұрын

Really wanted the TRD Pro wheels but also wanted to run 285/70/17s. Annoyed at Toyota. Ended up ordering the RRW RR7-H 17x8.5 with a -14 offset. I think they look better anyway 😂

@OverlandEngineer 2 жыл бұрын

Haha yeah its pretty dumb that the TRD Pro rims are 7" and the TRD Offroad rims are 7.5". You could still get away with running 285s but I think the wider rims perform better with 285s. So, doable but not as good in my opinion. I think you made the right call.

@vincesmith764 7 ай бұрын

Good stuff also the more negative off-set the more stress on wheel bearings.Also if you don,t do offroading much. ever then p rated. not. l.t. tires will ride a WHOLE bunch better ,they are lighter,, less stress on drivetrain and better fuel economy.

@kanevivalakane3699 2 жыл бұрын

I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado. The wheels are still stock. I have 3 options. Should I get -12 offset and remove spacers? Or Keep spacers with stock wheels Or Get -12 offset and let the wheel spacers be there..

@johnhancock1855 2 жыл бұрын

Are the new wheels lighter than the TRD wheels?

@OverlandEngineer 2 жыл бұрын

Looks like it. I would expect so since they are bigger. TRD pro rims are 17x7 (25lbs) and RRW RR6-H are 17x8.5 (28.4lbs).

@DavidRamirez-fe5dd 2 жыл бұрын

what brand of rims do you have. I love em. The dark nr bronze is awesome . where did you order then?

@OverlandEngineer 2 жыл бұрын

They are from Relations Race Wheels! Matte Bronze RR6-H. "OVLDENG" saves you some money!

@DavidRamirez-fe5dd 2 жыл бұрын

@@OverlandEngineer I was on thier website earlier. Said thee 0 offsets were sold out. Do you have sources?

@OverlandEngineer 2 жыл бұрын

@@DavidRamirez-fe5dd No they probably are. I technically run a -25 offset because I have zero offset with 1.25" spacers...

@Gnargoyle811 2 жыл бұрын

@@OverlandEngineer Would you mind showing us the difference in how much the tires stick out with the zero offset vs. the zero offset with spacers? Thanks for your content.

@OverlandEngineer 2 жыл бұрын

@@Gnargoyle811 message me on Instagram because there isn’t a good way to do that on KZfaq

@thomasskateaustinthomasvil7523 2 жыл бұрын

thanks for the vid! Do you know what the stock offset and weight is on a 2022 trd tacoma offroad is?

@TJ_Blazkowicz 3 ай бұрын

What's the offset?

@eddiesorianog 2 жыл бұрын

What’s the difference between the rr6-h and rr7h

@OverlandEngineer 2 жыл бұрын

I think primarily just style

@JF-lt5zc 5 ай бұрын

BFG KO/2s are highly overrated, IMHO. I had a set on my truck and was not impressed. Weak sidewalls, and way too easy to puncture. And overpriced. I'm picking up a 4Runner TRD/OR this weekend. It has Yokohama Geolander ATs of some sort on it already. They are new, so I'll run them until they are done then switch to my preferred Hankook Dynapro A/T. I have a set on my '15 Jeep GC and they have been fantastic on and off road. (yes, I take my GC off road.) I did a lot of digging to get the right wheel/tire combo to fit 32's on the GC. Went with 30mm offset (factory is 50), and they work great. However, I did it not really understanding what the numbers meant. With this video it makes perfect sense! Thanks! Also, since this video is a few years old now, can you give an update on how those M/Ts you put on there are holding up?

@jjgionet1735 8 ай бұрын

These are the Matt bronze, correct?

@OverlandEngineer 8 ай бұрын

Yep

@jjgionet1735 8 ай бұрын

@@OverlandEngineer thank you, these are so nice! Debating on these or the Icon Compression bronze. I personally prefer the RRW's but at $540CAD a piece it is a bit tough 😮‍💨

@bonifaciomagdiwang1697 2 жыл бұрын

is the bigger tires consuming more gas?

@OverlandEngineer 2 жыл бұрын

Definitely. But in comparison to the MPG loss of a lift and roof rack/roof top tent/roof rack cases. It is not that much.

@bonifaciomagdiwang1697 2 жыл бұрын

@@OverlandEngineer thank you 👍

@johngajonera6282 2 жыл бұрын

How’s the road noise ?

@OverlandEngineer 2 жыл бұрын

Honestly not bad at all. I would say slightly louder than all terrain tires but everyone I drive is like , wait?! these are mud terrains?!

@OverlandEngineer 2 жыл бұрын

But that is a very subjective question so what I think is loud may be quiet to you and vice versa.

@patriotsleepercell4060 Жыл бұрын

Im buying the same rims or the Icon vector 6 its a toss up for me.

@OverlandEngineer Жыл бұрын

Go RRW, especially the beadlocks are sweet

@patriotsleepercell4060 Жыл бұрын

@@OverlandEngineer They are out of stock

@kellogg2185 2 жыл бұрын

Not to nitpick, but the 12.5 refers to the tire width, not the wheel's width. Good video overall though, for sure.

@OverlandEngineer 2 жыл бұрын

Yeah I have noticed a couple people correct me on this term. I have always called the rubber tires or wheels and the actual rim, rims. I suppose many people use wheels. But yeah, especially in my case, my rims are for sure 8.5" wide and the rubber would be 12.5" in my example. Thanks!

@bikebudha01 Жыл бұрын

pffft... you want a real challenge, try doing this for a Honda Ridgeline... 5x120 bolt pattern... It's like looking for a plaid unicorn...

@caryallen9340 2 жыл бұрын

Mud tires don’t do well in snow. They hydro plain , unless it’s powder snow , meaning un plowed roads. If roads plowed mud tires slide to easy and you will wreck your truck.