I have installed the Oxford grips on two different bikes in the past year and suggested to be extra careful with the super glue. I would not put the glue in the tube and only on the bar, especially on the throttle side. On the throttle, side be extra careful and only put glue on the bar from the outermost part to 3/4 in. Otherwise, you risk super gluing your throttle as the glue will get under the tube. Then you will have to start all over and disassemble your throttle tube and cables to clean it all out which makes this a much harder installation than you may have wanted. About the product itself, I love them. Oem heaters are great if they come already installed, and if they don't I would buy the Oxford every time. I'm not crazy about the mounting bracket as I have to always have to modify it in some way for my bikes. I also spray paint the mount black to match my bars, most bikes brake or mirror clamps are black so why do them in silver that it stands out .

Just thought I'd post a comment on my install experience for anyone installing these. I've never done work on any sort of vehicle before I installed this and I was able to install everything onto a Honda NC700x without much of a problem. The biggest snag I had came from the throttle side since the tube had ridges on it and a lip on the end of the throttle tube. We sanded these down and the grip slipped on easily after that. A fair warning if you do have to sand your throttle tube: the powder that you'll get from the sanding process burns your skin. I'm sure that's making seasoned mechanics facepalm like mad and I should have probably had the common sense to have worn at least a mask to not inhale the dust, but it was a pretty painful experience to get burned by that crap in either event, so just a heads up. After using them at night for a week or so (it drops to roughly 65 here at night which is chillier than you'd expect on a bike), I'd definitely rate them 10/10, especially given the price.

Just fitted mine today… totally recommend these Oxford heaterz… super easy to use… quick one button full heat switch on by just holding the + button for two seconds… plus can be switched off quickly too using the - button again for two seconds… has enough heat settings to suit all environments… when the engine is switched off, it will carry on till it reads a drop in voltage, then switches to standby mode, then after five minutes the unit switches off completely, so no worries about being forgetful… easy to install and the only lengthy part is removing the old grips… can't wait to test them out and hear what all the rage is, as I've heard once you've tried you ain't going back to icy rubber… great vid btw;)) 

7/8” on the clutch side , but the throttle side needs to accommodate the throttle tube! It is bigger, read the install manual for details.

Just got my Touring model of these and let me tell you that the installation "ease" varies widely by bike. I have an ST1300 and it took me several DAYS to get these installed. Biggest problem was the tight tolerance between the inside diameter of grips and the outside diameter of bar and throttle sleeve. In addition, these grips are covered in rubber on the inside so they've added friction with that material on the inside. I've heard alot of horror stories about folks only getting the grips on half way when the glue kicks off. This then requires a destruction of the grips to get them off. In my case I wanted to make sure they dry fit before applying the glue. However, could only slide them on ~1-2", and that was using soapy water. Totally stuck on how to proceed. I spent about 20 minutes filing and sanding down throttle sleeve, but not much room to play with. On clutch side I used emery paper to remove old glue. Eventually said F-IT and got a water soluble lubricant (you'll find it in drugstore by condoms :-)) to do a final install. It took all my strength, and a few new blisters, to get the grips on. Even so, I would have liked the throttle side to go on another 1/2 - 3/4" or so. Caveat Emptor

Best on the market I've had no problems with those intelligent grips gets amazingly hot in the dead of winter!

You always present and demonstrate every product so well. Subbed

I just bought a pair from you......I thought I saw an install video.....BTW, as usual, great video Anthony

How do they hold up?

Just opened my Oxford Grips up, I was waiting for my bars to come in. It appears that the inside of both my left and right grips are the same diameter. They Are both the smaller size of the clutch side. They are marked properly left and right but the right one is not even close to fitting with a throttle tube in place. I've measured both inside diameters and they appear to be exactly the same. Must be a packing or manufacturing error. I just sent an email to Revzilla.

Which version/style do you recommend for a little Yamaha Zuma scooter for commuting?

Had these on my bike, lasted just over a year. Connection broke on the accelerator from twisting over time, can't fix only replace and Oxford won't sell you one only a complete pack.

Just got Oxford grips and I'm fairly certain RevZilla shipped me a returned open box unit... Ironic given the ending of this video.

Will this grips work with honda cbr650r 19 plate ?

Can RevZilla guy loose the voice? Maybe it's part of the brand... but it's impossible to listen to. A more natural yet enthusiastic voice would be far more effective. Thanks.

Hey azanthia revzibby kibby watchthis decide and ride?

You did not even use the grip in the video.

I clicked on the screen when you said "click here...and nothing ever hapend!! im very disapointed...my life will never be the same!!!

So if you leave them on when turning off the bike, will it kill ur battery or drain in significantly?

Just a heads up, I think the link for the product is broken.

Nice bangle

Holy crap, way too much unnecessary panning. Who made this? JJ Abrams? The constant unneeded "artistic" panning is overkill and very distracting.

My problem with the older version of Oxford HotGrips is that the rubber is turning to mush under the palm where it gets hottest after just a couple of winters. What to do??? The other problem of-course is that the fingers are still very cold while the palm is overheating. Controlling the temperature is difficult because there is no thermostat feedback. You have to crank it to 100% then bring it down manually while riding to prevent overheating.

thank feck for youtubes playback speed.....waffles so quickly ; Thanks for the review though , deliberating on which ones to purchase

Is there on/off button? How do you ride in summer if there isnt one?

Hi i wanted to know can oxford heated grip can be installed for the royal enfield interceptor 650. If so which model of heated grip I must purchase?? Waiting for your reply . Thank you in advance.

Ninja 300 ABS. I measured OEM grips approx 4.75 inches. The Touring model (listed at 4.72") is a mm short. The Sports model is longer, but trimmable, and still within spec according to Oxford. I'm just worried that the Sports model isn't as durable and will wear out quickly. Anyone have experiences with Oxford heated grips on a Ninja 300? Touring or Sport version? I commute and put on around 9,000 miles a year.

Hey Revzilla Please Answer me :) I am thinking of linking these grips into the electrical system instead of the power system, so they turn off imediately after I turn the bike of. Do you think this is a good idea? will I lose any functionality? Could you suggest a suitable position in the electrical system? (I was thinking of spitting the line to the little sidelight that I swapped to an LED so it draws less power). Thank you for your answer!

Do you guys know how to connect 2 wires with ring terminals together? Thinking of connecting this through SAE

I received today my heaterz from Revzilla. A friend of mine, a F700GS rider, asked me if they will work in electronic throttles? What would u recommend? Thanks and keep it up!

I fitted the Scooter variant to my Motorcycle because I like the way the switch discreetly fits into the fairing and only draws 3A. One question I have in regard to wiring it directly to the battery as per instructions is the automatic cutoff to prevent draining the battery if it is accidentally left on or switched on by a passerby as a cruel joke: Does the scooter variant also have the automatic cutoff or is it just the larger models? Can't find any mention of it but Oxford grips are known for that so I'm not sure.

RevZilla, will these heated grips interfere with the Gore Tex membrane on my gloves? I assume that if the temperature on the surface of the grips is warmer than the inside of my glove, it will therefore let water get inside the glove, right? Could you please clarify this? Thank you very much, love your videos.

Which type is better for cruiser?

Helloo! i have kawasaki z800 /2016 what grips should i order for it? i do alot of commuting to work. thanks

dont glue grips on. You cant take them off if you bend the bars or change bars. really stupid to even suggest superglue oxford.

I'm looking to get some for my Cb500f any suggestions on which I should go for? Thanks

Ninja 650 2015. Which one can I order?

Nice bro from where indian

please can you tell me can i use the grips for honda silver wing gt 600 and size my grips 12 cm

Can sombady help me plz i installed the oxfords 2 days later made a slide whit my bike now my stear is fuckt up how can i remove the supergleu whit out fucking my oxfords grips 😭😭

Those are molex connectors, not water proof...

Whats the name of the jacket to his right?

Which ones the shortest (in inches)?

Hi which model can be used for a 2011 Husqvarna TE511. I understand the grip lengths differ. Thanks in advance

what the hell did he say in the first 2 seconds?????

HI please can you tell me if i would be able to put them on a 125cc? it uses a 12v battery

Does it fit spyder F3 s?

Well its easy till Honda decided to fit a BATTERY UNDERNEATH the GASTANK Thank you

what to put on my honda transalp xlv 650 ?? anyone put it ?i think adventure are too big and sports too small

Your intro is annoying. The rest is good.

It voids your electrical manufacturer's warranty

No returns if one finds out it doesn’t fit on their bike…whaat?! In that case I’ll buy them from my buddy Jeff Bezos. He take all returns.

More like a home shopping channel for cheap silver jewelry ....!!!!

that bullshit because u had to help this guy with his motorbikke BC it ran his battery dwn n help him push start it