Thank you for making this video. I was curious on how much work it is. Your instructions are to the point. Great job!

I’m learning a lot from watching this. Thanks for taking the time to post it. Looking forward to the update.

You have saved me from a number of headaches

Probably the best step by step video.ive ever seen.....holy cow. Thank you

That was helpful, thanks for sharing!

Thanks so much. Great video. Very helpful and you did a great job explaining everything.

Really helpful, nicely done.

Thank you for the great and detailed video.. doing mine along with you!

Just did this the other day! pretty much the same kit. The rear lift with the heavy-duty leaf springs makes it sit up higher in the back than the front. Cool to watch your build as I am doing the same thing on my 95 Medalist!

I enjoy watching your videos

Great video! Our old stock EZGO electric golf cart was going to need tires so we ordered All Terrain tires. They were delivered mashed together for shipping and the young guys at the local tire store could not get them apart to mount them. I am in my late sixties and I had to pry the tires open myself. The rear axle had already been positioned under the leaf springs at some point in the cart's life so the tires bolted right on. They rubbed just slightly on bumps so I ordered a cheap lift kit. With the kit installed the front tires rubbed and the rear tires could not even be mounted so we had to order spacers.

Great video! Just finished doing it while watching this! Would of figured it out on my own but you definitely saved me some time! Thanks! Now if you'd just tell me the socket sizes so I didn't have to look on my own🤷‍♂️🤣🤣🤣 Jk! Thanks again for the video!

You can also hit the end of the shaft that the tie rod seats in (put the nut on hand tight before doing this) the rod will pop up within a 2-5 good hits.

I'm having a small issue where the bolts the hold the tie-rod in place are spinning with the nut when I try to tighten them

What are you using to test for voltage drops?

Very nice video, I just installed the same lift in mine but order new shocks and they do not fit they are too short, what brand of socks did you use? Thank you in advance Ozark Wild

Hey brother. Nice work! Just watched this. Not trying to be "that guy", but I noticed the front bolts on the rear leaf springs are in backwards. Have been from when you got the cart.

Can you add a link to the kit you used?

Semper Fi Brother!

Do you think it would make a difference if the small side of the rear lift blocks were facing the other way? My 2015 has the barke cable on top of the hub and not the bottom and the mounting plate interferes with the short side of the block but if I reverse it, it fits.

I just started doing my fronts with the same exact kit and one of my bolts won’t fit because the bracket doesn’t extend all the way across the leaf spring and is blocked by the shock bracket.

@Ozarkwild could you please attach the link to buy this lift? I want to do the same to my cart

Looks easy with the cart completely disassembled. Wonder how much of pain with one assembled? Lol

Hi, how to contact you for cooperations?😃

I have sent you an email and hope to get your reply.