P-51D Mustang Tamiya

Рет қаралды 27,335

Күн бұрын

Build step by step with the aid of 3D instrument decals. Tamiya 1:48 scale
Model kits online:
============================================================
Revell 1: 48 B25J Mitchell , Brown amzn.to/3S46C1Z
Revell of Germany B-17F Memphis Belle amzn.to/3PW02YI
Revell F-15C Eagle Plastic Model Kit, amzn.to/3Mq62bt
Chapters:
00:00 Intro
00:15 start the build the cockpit
03:10 how to attach the 3D decals for the cockpit instrument and details
05:45 cockpit instrument images
06:30 how to attach the cockpit and the fuselage assembly
07:45 wing assembly
09:20 How to paint the model?
16:20 apply decals
19:15 wash and weathering
20:30 fuel tank, propeller, and landing gear assembly
24:00 how to attach the main landing gear and undercarriage
26:00 The Final

Пікірлер: 27

@richardrosenau9292 2 жыл бұрын

I was wondering why the props were so far off the nose cone. Made me worry I had missed a special prop design. The details of your step by step video explained what I had seen and what to watch for when I start my own tamiya mustang. The added details you provided are a very stunning end product, great job. Thank you for sharing.

@ArdeconHobby 2 жыл бұрын

Thanks that you've noticed the props I just follow the guide and I wonder also why, thanks for the comment, my friend really appreciated.

@stuarthanna2417 4 ай бұрын

A couple of notes: make sure all 4 prop blades are lined up correctly, your main gear struts lean in to much + they should angle forward some more. If you study some photos you'll see. 👍

@maikgockel5061 2 жыл бұрын

Really fine, but I think with some improvements you can make better models. The Aluminium seems to thick and doesn't have the right mixing ratio. Your surface will be much more better if you thin it more. Next little mistakes are the scratches. Under the Aluminium is what? Right, Aluminium. So if you want to make some scratches, they were not Black. Rest is fine in my opinion and if you try these little tips your next NMF will be better.

@ArdeconHobby 2 жыл бұрын

thanks for your good advice, my friend.

@harjindersokhi9852 2 жыл бұрын

Great build, enjoyed watching the video immensely. Not sure that a natural metal aircraft would chip, painted areas certainly would, just not sure about the rest of the airframe. Definitely looks like it's seen some action. Thanks for sharing.

@ArdeconHobby 2 жыл бұрын

you have a good point, my friend, thanks.

@watchthesky. 2 жыл бұрын

Aluminium oxidises when exposed to sea air,salt etc......

@stevesmodelbuilds5473 11 ай бұрын

Great job! I got the same kit, but no 3-D decals 🙁. Steady fingers, steady... 😆 I got a pilot, though!

@mikelritchjr5911 2 жыл бұрын

Great job on the p 51 , I was quorious what type of brush you were using to do the panel line wash

@ArdeconHobby 2 жыл бұрын

Thank you, my friend, I've just used an ordinary fine brush, but before the application makes sure you have sprayed the model with clear gloss, likewise I add a little enamel thinner to liquify a little bit the panel line wash for the purpose that can easily slide on the panel lines.

@SchmidtJim 2 жыл бұрын

Great job on that cockpit! The 3D decals really add a nice touch! Were they made for the Tamiya kit? Have fun

@ArdeconHobby 2 жыл бұрын

thank you, my friend.

@stevesmodelbuilds5473 11 ай бұрын

I didn't get any with my kit...

@grantharrismusic 9 ай бұрын

The 3-D decals are from Quinta studios. They make a set especially for the Tamiya kit but interestingly this build uses the late version set made for the Eduard model.

@KrollDan 2 жыл бұрын

Chipping on aluminum skin? Not sure i understand.

@ArdeconHobby 2 жыл бұрын

ha ha ha... you're right my friend, thanks for the advice.

@jhs8496 7 ай бұрын

Mustangs were bare aluminum and Alclad. They weren't painted silver. The chipping here that takes the silver metallic finish down to black is wrong.

@michaelparker9907 2 жыл бұрын

"GREAT BUILD"WHAT IS THE NAME OF THE BACK GROUND MUSIC TATOTOL,GRUPE.PLEASE

@ronbaning5278 4 ай бұрын

Chipping bare aluminum makes no sense???

@dagwoodj 2 жыл бұрын

What airbrush are you using? That paint job looks horrible.

@ArdeconHobby 2 жыл бұрын

using only a cheaper one, maybe it is also the effect of hairspray that I've applied for chipping purposes, thanks my friend for your info really appreciated it.