P0500 Fixed WITHOUT CHANGING Vehicle Speed Sensor

Рет қаралды 126,424

5 жыл бұрын

In this video I show the following, .... How to solder broken wires to vehicle speed sensor/ P0500 Fixed WITHOUT CHANGING Vehicle Speed Sensor/ how to solder broken wires/ fixed code p0500/ soldering wires/ p0500 vehicle speed sensor/ car electrical connector replacement/ soldering wires together/ broken wires to vehicle speed sensor (vss)/ code p0500 broken vehicle speed sensor wires/ P0500 Fixed - Soldering Broken Wires To Vehicle Speed Sensor ... It's an easy fix and you'll save a couple of hundred dollars by fixing it yourself!!
** RELATED VIDEOS **
- P0500 Vehicle Speed Sensor Wiring Issue - • P0500 Vehicle Speed Se...
- Instrument Cluster (Speedometer & Gauges) Self Diagnosis -
Nissan - • Instrument Cluster (Sp...
Feel free to leave a comment. If this video helped you, then please click "Like" & consider "Subscribing." ...Thanks!
** New Videos every Thursday & Friday @ 12:00 PM **
DISCLAIMER :
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles and/or machinery equipment, as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury which could damage the vehicle and/or machinery equipment, compromise its safety, or cause property damage.
Although this video has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. The viewer of this video assumes full responsibility if a repair or maintenance procedure is undertaken by the viewer based on the contents of this video. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS VIDEO. In no event will beachtroll, be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this video. Beachtroll assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk.

Пікірлер: 63

@elmaddog1978 5 ай бұрын

Great another video without any vehicle information.

@bunnywaffles5295 4 жыл бұрын

Thank you so much for showing all of this. It’s very helpful for first time DIY’ers. For future soldering, just hold the soldering iron against the wires you’re joining for 3-4sec to make em hot, then press the solder against where the iron meets the wires and it will melt against the iron and wick right into the hot wire in a perfect wrapper instead of hot globs sitting on cold wire

@beachtroll8344 4 жыл бұрын

Thanks for the tip!

@mikeeaton1337 4 жыл бұрын

Flux would have made that so much easier not to mention given you nice clean soldering joints that are smooth and strong

@galdyvlogs6472 6 ай бұрын

Very helpful video, thank you for the explanation on how to fix that problem.

@beachtroll8344 6 ай бұрын

Glad my video helped, thanks for watching!

@toddinthemiddle 5 жыл бұрын

i have an issue with my speedometer not working (i got the same p0500 code on a code reader), and i am blowing gauge fuses. were you also blowing fuses?

@devonrosa4414 Жыл бұрын

Subbed, thank you man!

@beachtroll8344 Жыл бұрын

You’re welcome 👍

@avuky191 Жыл бұрын

My VSS wiring is shorted out somewhere in the middle between VSS and ECU. What is the best strategy to find the short?

@fish8five646 2 жыл бұрын

Being that the sensor wasn’t technically “plugged in” so to say, was it causing any bogging while idle? I have a speed sensor code, but even when transmission is in park it still bogs very badly. I even replaced the fuel pump cause I thought maybe that was the reason

@moizkhan4891 3 жыл бұрын

Do u nw wireing of Nissan ud tracks speedometer sensor

@garysuarez9614 2 жыл бұрын

You helped me. I subbed you. Similar problem.

@beachtroll8344 2 жыл бұрын

Glad my video helped....Thanks!

@beachtroll8344 5 жыл бұрын

@Eric....I did not have a blown fuse. The VSS wiring had broken (both wires) and was not connected to the VSS. Good luck !

@toddinthemiddle 5 жыл бұрын

Thanks....

@josebautista8551 3 жыл бұрын

Hey man do you have a email or some way of contacting you about a similar model of this Sentra?

@rockefellereleazard3641 Жыл бұрын

Good evening Sir, Can you please show me where the speed sensor is located on a Subaru foster 2009

@maddid2056 2 жыл бұрын

Hi. I am struggling with the same problem. I need the exact same connector clip you show here in your video. I can’t find it anywhere. Can you please tell me where you bought yours? This video has been extremely helpful. Thank you so much for sharing.

@beachtroll8344 2 жыл бұрын

I’m sorry I can’t remember the website that I ordered it from....I do remember I searched a lot of sites before I found the matching connector....Sorry ... If I have the time later, I’ll try looking at my statements from 2 years ago to see if I can find the site.....Good luck!

@maddid2056 2 жыл бұрын

@@beachtroll8344 No problem. Thank you.

@beachtroll8344 2 жыл бұрын

@@maddid2056 Sorry, I checked but I can only look back 1 year on my statement 😡..... If you take a picture of the connector, show it to an auto supply store. They should be able to match it....Good luck!!

@anthonyirving6728 3 жыл бұрын

Hello was that connector for one of the front wheel abs sensors? I'm struggling to solve an issue with a 2001 7.3. Any and all help would be greatly appreciated.

@beachtroll8344 3 жыл бұрын

No , the connector was to the Vehicle Speed Sensor....The wires were loose....Good luck on your repair!

@efftypee7891 3 жыл бұрын

@@beachtroll8344 where is it located ??

@jeremiahfiek5495 Жыл бұрын

You CAN take that connector apart and pull the pins out and replace just the pins & wiring, or solder new wire to it that way. The pins DO come out

@johnluke4674 4 жыл бұрын

Quick question. Did you have a symptom for the code to pop up? What is the make and model?

@beachtroll8344 4 жыл бұрын

The speedometer & odometer stopped working, and the overdrive dash light was flashing.

@beachtroll8344 4 жыл бұрын

It's a 2004Nissan Sentra

@chrisclark5127 4 жыл бұрын

While the connector is bad does the vehicle still track mileage internally or will the odometer pick up where it left off when it is reconnected?

@beachtroll8344 4 жыл бұрын

It will just pick up where it left off.

@Janietoogood 2 жыл бұрын

@@beachtroll8344 woah, it doesnt track mileage? Is that why my odometer doesnt show mileage on first two digits maybe?

@RobinEdwards-cr2mj 3 ай бұрын

Where did you plug it in though!

@jayt717 4 жыл бұрын

You can’t cut the heat shrink tubing to fit?

@minecrafterselite1 3 жыл бұрын

no it was titanium, tungsten, vibranium alloy shrink tube so no scissors could cut through it.

@rayonwilliamssportsandfun2106 4 жыл бұрын

2007 Toyota Corolla s have the same code P0500. Vehicle speed transmission sensor.. I replaced it . The output one and it's still doing the same thing. Rev high like it's going in neutral when driving . What can I do ? If anyone know please let me know .. my speedometer still works

@friedice6535 Жыл бұрын

I have the same issue, I replaced the speed sensor but nothing happened. Were you able to solve the puzzle? Please share. Thank you

@mishimposble Жыл бұрын

I've seen a video where cleaning the ABS sensor at each wheel resolved the problem on a Toyota Solara. It may be worth a shot. kzfaq.info/get/bejne/rs5ihKqDv7PVnJ8.html I've also seen a video where it was problem in the cluster (odometer housing where there was no signal and needed a repair or replacement on a Tacoma)

@iamdonaldduck9740 Жыл бұрын

What kind of vehicle ? ..PO500 code is for a arctic cat ATV

@JackMeyHoffer562 2 жыл бұрын

Hi there, I'm getting the P0500 code, The odometer goes blank but otherwise, no issues driving, idling, etc. Nothing seems wrong with it at all. Any advice?

@s1ncere16 2 жыл бұрын

What year is your car? Did you get it fixed?

@oo0Spyder0oo 5 жыл бұрын

what if you get a p0500 but your speedo and trip meter all works? That's what I have. Even the lcd digital speedo shows the speed besides the analogue one. cheers

@beachtroll8344 5 жыл бұрын

oo0Spyder0oo .... if you have a scanner (if not, you can go to AutoZone and they'll do it for free) try clearing the code to see if it comes back on. If does, check the VSS wiring. A wire could be loose and not making the proper connection to the VSS. Good luck & thanks for watching!

@oo0Spyder0oo 5 жыл бұрын

@@beachtroll8344 Yes I have a scanner and that's what showed me the p0500 code. I just thought it wouldn't show the speedo correctly but it seems to work. I reset it once and after a few k's it's come back on, the engine warning symbol blocks the lcd readout. Also my cruise control won't activate, even though it says it's on. I suspect there's a link there as well. I'll see if the wiring is loose or something but I don't get how it relates to the cruise control. Cheers

@joedafireman7307 5 жыл бұрын

Try the ABS sensor, will give the same P0500 code.

@Dreadshadw 4 жыл бұрын

what year make and model was this vehicle?

@beachtroll8344 4 жыл бұрын

2004 Nissan Sentra

@Dreadshadw 4 жыл бұрын

@@beachtroll8344 I have a 98 Toyota Tercel but can't find the speed sensor location on it and there doesn't seem to be a Haynes or Chilton manual for that year

@haroldmacphee8252 4 жыл бұрын

I have a Nissan Pathfinder 4x4 automatic is the VSS in the same place as a Nissan Sentra my pathfinder is a 2004

@risengaming4044 Жыл бұрын

Wish you would have shown where this wire is

@jozefsoucik3115 Жыл бұрын

please dont solder by this guid. You have to preheat wire and solder by heated wires not touching the iron.

@johnhicks3890 4 жыл бұрын

What's the location of this sensor?

@beachtroll8344 4 жыл бұрын

It's on top of the transmission, close to the dashboard firewall. You can see it in the video.

@mooandal391 3 жыл бұрын

Your soldering is awful 😞 man . Thank you 😊

@beachtroll8344 3 жыл бұрын

😁😁 I know...I’ve never been good at it. Although it’s been over 2 years and it’s still holding.

@rothe31 2 жыл бұрын

@@beachtroll8344 If you got Rosin core solder and get an iron that gets hotter you will have better success. I’m not here to bash, but with the right tools, the job is easier. Soldering isn’t hard, set the iron on the bottom of the wire and with Rosin core solder (thin solder), touch the solder to the edge of the soldering iron and the wire… when the solder melts it will apply flux to the wire and as the wire heats up you will be able to put the solder directly on the wire and not the iron, go until the connection is full. It will flow through the wires making a great connection! You’re on the right path, but wrong solder and to weak of an iron. I run my variable iron at 42c x10 (420 degrees C), which is its max.

@minecrafterselite1 3 жыл бұрын

bro that solder is a war crime

@beachtroll8344 3 жыл бұрын

Lol...I agree. I hate soldering, but it’s been over 2 years and it’s still holding.

@flatboat67 Жыл бұрын

where is the speed sensor. dont make more videos

@Osiel433 Жыл бұрын

????

@Osiel433 Жыл бұрын

😢 What kind of car are you working on?

@beachtroll8344 Жыл бұрын

2004 Nissan Sentra

@nastybastardatlive Жыл бұрын

Your soldering technique is bad. You're supposed to use the iron to heat the copper strands, then hold the solder against the copper until it melts into the strands through and through. It's also good to "tin" the wires before hand (heat them until the solder coats all the strands of copper before you twist them together).