P100 Half Mask Respirator review pollution filter for your face

Рет қаралды 39,998

Күн бұрын

The pollution where I live is BAD and this respirator mask helps tremendously. It probably works well for construction purposes. I would wear this if i was welding, for sure.
CA Fire relief assistance opportunity: www.nytimes.com/2018/11/11/us...
You can buy it here, i dont make any money from this.
GVS SPR457 Elipse P100 Half Mask Respirator, Medium and Large GVS : www.amazon.com/dp/B013SIIBFQ/...
P100 rating explained: www.cdc.gov/niosh/npptl/topic...
Flapping Straps slapping the face link: there is no link, it was a joke
It appears that Miller also makes these nearly exactly the same for welding
Miller ML00895 Lpr-100 Respirator W/Filters, Medium/Large by Miller Electric
www.amazon.com/dp/B01HDY18JW/...

Пікірлер: 117

@johngray9434 4 жыл бұрын

I own the same mask but difficult to see how it could provide any protection from covid-19 where the centre valve has no filter where the valve lets in air when you breathe out. The valve actually opens up by 3-4mm which seems really weird. The other problem I have with it is the build up of moisture and the spray effect when it reaches saturation.

@TRYtoHELPyou 4 жыл бұрын

It will help you from getting a disease, possibly but YOU ARE RIGHT! This is not a good mask for protecting others around you. You make a great point a out the condensation and aspiration.

@richardl7794 4 жыл бұрын

The centre "exhalation" valve seals as you breathe in, but opens up as you breathe out, that's how they all work. However it will offer no protection to anyone around you, should you become infected, as the air you breathe out is unfiltered.

@totallyfrozen 4 жыл бұрын

Air cannot enter where you exhale. The force of your exhalation will push air out, it cannot come in at the same time. The way it could protect you from COVID-19 is that the P100 filters can possibly trap some of the viruses before they enter your airway.

@totallyfrozen 4 жыл бұрын

ImperiusRex Have you tried that? First off, there is no need to put tissue or anything else on the exhalation valve. Coronavirus cannot enter this mask through the exhalation valve. Secondly, it will hinder the flow of exhaust causing CO2 and heat to increase inside the mask. Third, the paperwork included with the mask specifically and clearly states to NOT modify the mask or use any components in it that are not specifically made for the mask. So when you pass out after blocking your exhalation valve, you’ll have no one to sue but yourself.

@TRYtoHELPyou 3 жыл бұрын

@@totallyfrozen EVERYONE, listen up. Some people are asymptomatic. That means they have the virus but show ZERO SIGNS of having it. Put this mask on them and they spread the virus. Plain and simple. Do NOT use this as a coronavirus mask. Community spread sustains. CDC.gov

@totallyfrozen 4 жыл бұрын

So far the best review of this respirator that I’ve seen. I’ve been looking at getting one for dusty yard work.

@TRYtoHELPyou 4 жыл бұрын

It is PERFECT for that. Especially when on a gas burning riding mower. It cuts out the exhaust. The difference is very noticeable. Right now tho these seem to be hard to get, replacement filters as well ..

@totallyfrozen 4 жыл бұрын

TRY to HELP you I finally got one of these! I also have a full face 3M 6900 and an RZ Mask. Of the 3 this GVS mask is my favorite. I absolutely love this mask! I put it on the first time and adjusted the straps just right and now I simply pull it on and it has a perfect seal every time. I find it super comfortable! In the last 3 days, I’ve done some minor construction and wore this for saw dust while running the saw and while handling insulation. So far, I’ve worn this 3 times for about 4 to 5 hours at a time. SUPER comfortable!! Seals easily, comfortable, compact, does a great job filtering the dusts out. 👍🏻

@walter2670 5 жыл бұрын

I have this same respirator with the Miller branding. I really like it. Doesn’t fog glasses/goggles. Can breathe cool clean air unlike disposable mask. Fits under my welding helmet too.

@TRYtoHELPyou 5 жыл бұрын

They are pretty Pro!

@trevethan82319841 5 жыл бұрын

I have this to but it doesn't seem to work well because the middle outtake moves in and out when I breath in and out that makes me thinks that the filter don't do anything As if there for so show

@gardensofthegods 5 жыл бұрын

@@trevethan82319841 oh please don't say that because I was hoping this would be the answer for my brother who has all kinds of health problems on top of that is now dealing with black mold in the house and he really does need a 100% filter but he needs to be able to breathe as he already has breathing problems

@trevethan82319841 5 жыл бұрын

@@gardensofthegods I don't. Lie to people if I did I'd have bad karma in my life

@ethanelectric1024 4 жыл бұрын

welding is just what i want to use this for

@DugMagic13 4 жыл бұрын

Can you use the GVS SPR450 Elipse P100 filter with the GVS ELIPSE OV+AG/P100 mask? There seem to be two different options. The one you are showing is a flatter filter when there is another similar mask with cartridges.

@brucemcardle 5 жыл бұрын

Pro: it makes you look like Bane

@TRYtoHELPyou 5 жыл бұрын

Under one day and i already have a Bane comment! YEsssssssss

@jakestevens7283 4 жыл бұрын

@Bruce McArdle there’s one that’s even more Bane like lol, btw I think these two are the best half masks as far as being low profile... www.amazon.com/gp/aw/d/B077TX6TRX?psc=1&ref=ppx_pop_mob_b_asin_image#aw-udpv3-customer-reviews_feature_div

@ibrahimsued4906 2 жыл бұрын

Like Hannibal Lecter

@MuskokaMudFish 5 жыл бұрын

What size did you get?

@cliffcox7643 3 жыл бұрын

I have this for ER work in a Covid tent. I works great.. I use some Kleenex rolled up on the bottom to absorb the condensate inside.

@TRYtoHELPyou 3 жыл бұрын

Do not use masks with exhalation valves. www.cdc.gov/coronavirus/2019-ncov/prevent-getting-sick/about-face-coverings.html

@Anniefawesome 5 жыл бұрын

I would highly, highly, suggest mine. It is a Honeywell North half mask, with a organic vapors, formaldehyde and P100 cartridges. (olive green) I dissect cadavers and we are exposed to a lot of chemicals and I know it works. It doesn't burn when it breaths right! If you are pregnant you will need to be fit tested to ensure your lungs are strong enough.

@Polarcupcheck 4 жыл бұрын

How often do you need to change the filters? I want one for particle (coronavirus), drywall work, and painting. The one in this video is only geared towards particle. Whereas the 3M 6200 can go particle or gas vapors. Sounds like the Honeywell is versatile, too.

@skyace888 3 жыл бұрын

How can you tell when to clean or replace the filters? (especially for silica dust which is white)

@Jay-nw1bp 4 жыл бұрын

Where would you get replacement filters ? Thanks for the review !

@TRYtoHELPyou 4 жыл бұрын

I have bought several on Amazon over the last year or so. Miller brand for welding is good.

@h4mza786 2 жыл бұрын

I bought one to spray paint few parts of my car but I can still smell paint so guessing its not safe 🤷‍♂️

@DJH3ARTL3SS 4 жыл бұрын

Would the P100 OV filter work better for the virus ? I think those ones have charcoal in the filter for added protection.

@yuppiemobile69 4 жыл бұрын

Yes, it will be helpful for you reducing to some extent, your breathing in, and definitely will reduce others getting your virus if you have it....but I don't know if its "better for the virus"...and WHY would you want something that makes life better for Corona?

@DJH3ARTL3SS 4 жыл бұрын

yuppiemobile69 I mean I don’t want it better for the virus but better for myself against the virus. I ended up getting an MSA gas mask instead and feel a lot safer with that.

@TRYtoHELPyou 4 жыл бұрын

There is no filter on the exhale, this is not good for community virus spread which is why mask orders are in place. Do not use for public outings with regards to COVID-19.

@TRYtoHELPyou 4 жыл бұрын

There is no filter on the exhale, this is not good for community virus spread which is why mask orders are in place. Do not use for public outings with regards to COVID-19.

@alanfindingzen 2 жыл бұрын

Would this work against exhaust fumes ? I work at a golf course and use a sand pro that emits fumes.

@TRYtoHELPyou 11 ай бұрын

Sorry I'm just now seeing this, you likely want a filter with an Organic Vapor rating, not this mask, tho this mask will help some.

@yolazerbeam3205 4 жыл бұрын

Why is there no exhaust filter? It seems like you are able to breathe through the center port with no real filter. Is that correct? You have 2 p100 side filters but no center exhaust filtered out port. Am I seeing that correct?

@TRYtoHELPyou 4 жыл бұрын

you are seeing that correctly. When working with welding or just trying to keep particulate out of your lungs there is no need to filter the exhale. This is NOT for medical use.

@afcinternationalinc.4761 4 жыл бұрын

No, you are not breathing through center valve. It is a one-way valve. It only opens to allow exhaled breath.

@Mikey-ym6ok 3 жыл бұрын

For welding not for covid.

@williamfitch3836 4 жыл бұрын

I'm ask you question, I did reach about this Elipse P100 or Elipse P100 NIOSH NUISANC WHICH IS THE BETTER VERY STRONGER PROTECT AWAY FROM BACTERIA AND VIRUSES. I want know about the exactly protect away from Coronavirus can't through Elipse P100 safetly ?? please help me

@TRYtoHELPyou 4 жыл бұрын

not an anti viral filter. virus is small.

@Mikey-ym6ok 3 жыл бұрын

There is no mask to filter out viruses. Masks are to protect others from virus clinging on to spit, and mucus spewing out of your mouth and nose.

@Fit_soldier 4 жыл бұрын

Very informative thx👍🏽

@TRYtoHELPyou 4 жыл бұрын

Glad I could help.

@user-kv4qu2dv3e 3 жыл бұрын

How often do you need to change the filters?

@TRYtoHELPyou 3 жыл бұрын

After welding a lot or at least monthly if worn a lot. Right now it's hard to find filters. On my last set.

@bulletfingrz 3 жыл бұрын

Any one how to clean oil off of it? My mask has some oil or grease seeping from it. I am trying to get it clean and after a while it comes back

4 жыл бұрын

Is it normal that the filter infront moves when you inhale and exhale? Like a valve?

@TRYtoHELPyou 4 жыл бұрын

Exhale, the center valve let's the air out.

4 жыл бұрын

TRY to HELP you thank you

@spice9623 3 жыл бұрын

Thanks and subbed!

@linlinlixin2637 3 жыл бұрын

I'm looking at getting this for cycling in traffic?!!

@rolliecrooks 5 жыл бұрын

Lol. I liked how you made this video. Like a manchild comedy. Subscribing just for that

@Mikey-ym6ok 3 жыл бұрын

Just bought the miller. All the paper masks just spew fog in the glasses and welding hood. Hope this will remedy and keep me safer. Has anybody used this for a sentinel? I have a sentinel and hope it’ll fit.

@danielgonzalez2582 2 жыл бұрын

an Esab Sentinel welding hood? I have one of those and planning to get myself a gvs elipse mask

@mysticmarble94 4 жыл бұрын

CORONA VIRUS GANG ... Where you at ??? 😂

@AgressiveSillence 4 жыл бұрын

im here

@TRYtoHELPyou 4 жыл бұрын

I must say, this mask is not rated for viruses. The filter with the yellow marking is your better bet but still may not be virus blocking. Better than nothing I suppose.

@AgressiveSillence 4 жыл бұрын

@@TRYtoHELPyou Hey can you tell me if this mask is good for this situation? www.amazon.co.uk/Stealth-Reusable-Half-Safety-Respirator/dp/B07FJYP4PY/ref=sr_1_6?keywords=stealth+mask+respirator&qid=1580391143&s=diy&sr=1-6 Thanks in advance!!

@annymus4502 4 жыл бұрын

TRY to HELP you Yes, please, which mask would you recommend for airborne diseases? I thought P100 masks could work... Also, is it easy to breathe with that?

@AgressiveSillence 4 жыл бұрын

@@annymus4502 The mask from my link is good, I talked to some pro mask guy and I ordered that one.. it arrived today. You need p3 filters dosent matter the mask but this one is the only one I found in size S because I'm a girl and Ihave a small face ( it needs to seal really good so air cant get through)

@marklarson3934 4 жыл бұрын

Haha "good for the runs" My I suggest a high fiber diet 😄

@davedark27 2 жыл бұрын

Can you talk comfortably while wearing it?

@jasondixon9095 5 жыл бұрын

Where did you get that from

@TRYtoHELPyou 5 жыл бұрын

Really? Watch the video or read description for the answer. Here as well. GVS SPR457 Elipse P100 Half Mask Respirator, Medium and Large www.amazon.com/dp/B013SIIBFQ/ref=cm_sw_r_cp_apa_-yo8Bb20CQJFJ

@Yaotl-1 5 жыл бұрын

Are you being a smart ass or are you serious? He said it in the video, you know the one you clicked on and watched. It's even in the description, that thing you passed to scroll down to the comment section to ask that question.

@QueenKLLC 4 жыл бұрын

What's the price rang

@faithfulsentinel4271 4 жыл бұрын

About $30 retail --- If you can find it.

@Mikey-ym6ok 3 жыл бұрын

@@faithfulsentinel4271 just bought the miller for 35. Still in stock

@TheFirstAmendment 4 жыл бұрын

I’m supervising this women who’s PREGNANT 🤰 and is welding GALVANIZED! the company won’t Adequately help her in my opinion . If you’re in a closed area on 2 sometimes three sides and one being directly over your head a small fan won’t do you justice with that crap with a radius of 15ft .. so I got her this . Amazon accidentally sent me 12 from the past when I was welding and needed one .

@kitsurubami 5 жыл бұрын

the straps being "funny but annoying". Sounds like me.

@TRYtoHELPyou 5 жыл бұрын

beauty is in the eye of the beerholder.....?

@kitsurubami 5 жыл бұрын

@@TRYtoHELPyou haha! good one :D

@TheMichaelGrace 5 жыл бұрын

Looks great but my beard and the mask wouldn't get along at all.

@TRYtoHELPyou 5 жыл бұрын

Your thumbnail must be out of date :)

@TheMichaelGrace 5 жыл бұрын

@@TRYtoHELPyou haha! Guilty as charged.

@TRYtoHELPyou 4 жыл бұрын

Looks fixed now!

@blackbeauty5811 4 жыл бұрын

Anybody here for coronivirus 2020😷😷

@TRYtoHELPyou 4 жыл бұрын

Unintended side effect of the video, I suppose. Wash your hands!

@khristopherbourque7345 4 жыл бұрын

This work ok for Covid.

@TRYtoHELPyou 4 жыл бұрын

Minus that you will exhale all over people spreading the virus if you in fact have it .. so not. Please don't use it for essential travel in society right now.

@terrienoll225 4 жыл бұрын

@@TRYtoHELPyou Agree about the exhale but they are supposed to be wearing a mask too.

@cliffcox7643 3 жыл бұрын

@@terrienoll225 exactly, and if you are like me in healthcare and get tested every 2 weeks, you're negative, and OK>

@terrienoll225 3 жыл бұрын

I would argue that exhaust ports cut the success rate of mask wearing because only one person is wearing a mask that restricts their exhaust of virus.

@terrienoll225 3 жыл бұрын

@@cliffcox7643 If you’re in health care, you should know that testing every two weeks is not sufficient to determine if you are a carrier. You can be a carrier and not test positive until you begin to manifest the disease.