I call mine the "gas station gun". My go to for quick errands.
@saiyan25256 ай бұрын
Don’t listen to these ppl about making the gun bigger, just make more so they’re in stock
@jessejeffries8170 Жыл бұрын
When will more drop? They're out of stock EVERYWHERE
@chutethemall80999 ай бұрын
Don't ever change it. It's perfect as is. Just bring back the 10 round mags.
@jeremypinkston4517 ай бұрын
Please make these again, they're impossible to find
@mz48753 ай бұрын
Seen some for 329.99 on grabagun
@Nakanokalronin Жыл бұрын
I hope this little gem is in the line-up for a long time. One thing you need to do though...MAKE STEEL MAGAZINE CATCHES FOR IT.
@rodneyws19775 ай бұрын
Make more of these. They're impossible to find!
@markedman3990 Жыл бұрын
I would love to see a double stack version of this exact pistol. Plenty of ppl would buy that! Like maybe at least 12 or 13 round mags.
@Optimization_Coach11 ай бұрын
If that's the case Lcp Max
@markedman399011 ай бұрын
@@Optimization_Coach yes! That's correct, it would be similar but I'd love to see a conversion barrel kit for the LCP Max to swap to 32acp. Some ppl just like that caliber.
@Lavamyhuevos1910 ай бұрын
@@markedman3990yeah it’d be probably slightly thinner and less recoil than lcp. Keltec basically own the market for 32 acp so it’d be interesting
@zelenisok8 ай бұрын
and the 10 round extended mag would turn into a 16-17 round extended mag.
@markedman39908 ай бұрын
@@zelenisok That would be awesome!!
@SMac-bq8sk6 ай бұрын
Ah yes, the mythical Kel-tec P32. Lotsa luck finding one in stock to purchase nowadays.
@unitedstatesirie74315 ай бұрын
I will never sell my 1 generation KEL-TEC P32 pistol ! These are very collectable.
@SMac-bq8sk5 ай бұрын
@@unitedstatesirie7431: 👍
@kkirk1381 Жыл бұрын
Will you guys be re-releasing the 10 round magazines for the p32’s???
@BWIENS7897 ай бұрын
Good video but can you actually make some now? They're out of stock everywhere.
@silverfox53199 ай бұрын
Excellent video. I love my P32.
@unitedstatesirie74315 ай бұрын
for some reason the KEL-TEC P32 pistol is amazingly accurate shooting a large variety of 32 acp ammunition types ! ✅ (hollowpoint, full metal jacket, etc.)
@b-rye50949 ай бұрын
This will probably fall on deaf ears, however i would love to see a new generation of the p32. Maybe updated cosmetics, updated sights and an updated trigger. If you can find a way to add some more rounds and still be reliable with the rimmed cartridge that wpuld be cool too. Just not sure its a real money maker for kel-tec. My gen 1 p32 has been to every hospital visit, every family get together, every quick trip to the store for the last 20+ years, but would love to see some updates.
@unitedstatesirie74315 ай бұрын
I have taken my 1 generation KEL-TEC P32 with me often when I worked at the Washington State MICROSOFT company in the 1999 through 2002 years. My coworkers never found out. 😊
@Just1American19663 ай бұрын
I can't think of a single thing I would change about this defense-oriented, pocket-class pistol. Leaving off the high-profile sights maintains ultimate concealability. Leaving the trigger heavy maximizes safety in a pistol that is likely to be grabbed blindly in desperation. Leaving "cosmetics" (what?) alone maintains production costs. I fell for the Ruger LCP-MAX when it came out (literally, the very next day.) It didn't take long for the extra weight, the apprehension over its cocked hammer, and the tall sights' effects on concealment, to end the honeymoon. It's still a great piece, but I find myself grabbing the Kellie far more often.
@PanarchyTheaterАй бұрын
Pocket pistols shouldn't have snaggy sights, and a "nice" trigger. Sorry. Defeats the purpose.
@b-rye5094Ай бұрын
@PanarchyTheater i disagree, if your competent it shouldn't matter
@Just1American1966Ай бұрын
@b-rye5094 Oh, the irony of the word "your" appearing before the word "competent." ;-)
@jacobbrownthe2nd Жыл бұрын
I don't know If anyone at KelTec will ever read this but I hope they come out with a p.32/P3AT that has the stack and half magazine design much like the LCP Max. The .32 could hold 13 to 15 rounds In a gun that Is slightly bigger than what Is shown in the video. Another thing I would like them to do Is make It have a heel release magazine Instead of the button, I have had the magazine pop out of my p.32 a million times.
@gunguy834811 ай бұрын
Ruger copied kel tec now it’s keltecs turn to copy them
@Just1American196610 ай бұрын
Many P32 owners have had to file down the magazine release buttons on their guns to cut reduce that. I'm one of them. It's worse for me being left-handed because that puts the magazine release facing outward where it's more likely to be inadvertently actuated.
@MarvelousSeven5 ай бұрын
Been looking for a tan/tan P32 for like a year plus. When are you making more of these?
@s.thompson9 Жыл бұрын
More 10 round mags please
@unitedstatesirie74315 ай бұрын
I guess KEL-TEC doesn't like money.
@Shadow962775 Жыл бұрын
The P32 is awesome!
@CaptainSeamus Жыл бұрын
I've carried a P3AT as a strong part of my EDC mix for several years. I've shot a few hundred rounds through it, it's a handful, but it hits what I aim it at. P32 and P3AT are great, simple, LITTLE firearms. They are a handful, but they run.
@rad_lad_2715 Жыл бұрын
Please bring back the mag insert to prevent rim lock
@paulmcmaster97104 ай бұрын
Make more of these. I cant find them anywhere without a crazy markup
@stephanieroberts139410 ай бұрын
Is keltec ever going to bring back a spacer kit for the .32?
@markedman3990 Жыл бұрын
The P32 was the 1st Keltec I bought. I wanted to satisfy my curiosity! Turns out it was a great pistol! I was very impressed....simple, reliable, lightweight! I'll never get rid of my P32!
@TehSpury Жыл бұрын
Im gonna buy one also. I heard hollow point don't run well though
@Optimization_Coach11 ай бұрын
@@TehSpuryRan hollow point with no issues
@Just1American196610 ай бұрын
Mine was my second, in 2011, a year after my first, which was a PF9, and it backed up that big sister for several years.
@rex89585 ай бұрын
@@TehSpuryhollow points in 32 acp are useless anyways, rarely expand and penetration is usually less then FMJ loads, not to mention cost
@TehSpury5 ай бұрын
@@rex8958 I got the p3at instead in 380
@MDMakeDangerous2 ай бұрын
My suggestion is to offer a slide with an rmsc/holosun 407k footprint welded to the slide. I second the 1.5 stack mag suggestion as well. Beefing up some of the components could be great like some have suggested. I appreciate your elegance in design of the p32. I look forward to you guys shaking up the market for micro compact guns again in the future.
@ahumanbeing68758 ай бұрын
Since the LCP copied the P3AT, how about y'all copy the LCP MAX in the P32. P32 Max with ten plus rounds!
@wadepage5823 Жыл бұрын
I bought the 1st Gen P32 back in early 2005. It has been a great little pistol. I also own a P-11, PLR-16, RDB. I previously owned a P3AT, PF-9, P-40, RFB, Sub2K and SU-16C. I enjoyed all of my Kel-Tec firearms. Anytime I needed a spare or replacement part, I called and it was sent to me promptly and free of charge. I have also been a member of the KTOG forum since 2006. Keep up the great work George!
@nelsonr1467 Жыл бұрын
Are you guys going to make more of these and more 10 rounders
@Tomb-G19 Жыл бұрын
I can't find the p-32 anywhere
@SMac-bq8sk6 ай бұрын
Same. They're out of stock everywhere. I'm starting to think they're just a myth.
@Blimpie10002 ай бұрын
I carry a 3AT in a Sneaky Pete holster. I have a P32 also. Both have side clips for inside belt carry if I wearing a business suit. Great video. Thank you
@ponraul1221 Жыл бұрын
Please bring back the +1 mag extension!
@henrydelvalle770610 ай бұрын
I've had one since the early 2000s. It's the old generation one but has never failed me.
@jackbernal85345 ай бұрын
Incredibly, a lot of people like the Keltec P32, myself included. I've been looking for one the last couple of months without succes. Are they still making them?
@nfaisnfgay4 ай бұрын
They only release them in batches sadly. No clue on when the next batch is, or how many
@jettschenker Жыл бұрын
I've got 2 of those little monsters, one blue and one army green.
@hulkcarranza85836 ай бұрын
I can not find this gun anywhere
@unitedstatesirie74315 ай бұрын
for some strange reason the KEL-TEC company doesn't like manufacturing and selling their most popular guns !
@jcoxy1057Ай бұрын
They come out in waves. Just got mine yesterday
@deanoffishing21394 ай бұрын
Great video.
@scubaguy00710 ай бұрын
Mine came in a cardboard box. 😕 That was a long time ago. I bought a P11 the same day. Sold them both. I can sell my P3ATs. I like them... a LOT! I wished you'd food the market with PLR16s again. There was a time I bought one for $439, and the last one was $580. Ouch! I love KelTec guns, especially the pistols. Keep doing what you're doing and get some PLR16s in the stores soon!
@ronwinn879 Жыл бұрын
Thanks for video. Please make a double stack - would sell like hot cakes!!! Have 6 Keltec products - would like another.
@youkilledkenny85 Жыл бұрын
Only small guns I have is a p32 and a P3AT there some of my favorite guns,if your considering buying one do it
@viscious_uv29 ай бұрын
Will you please make a pinky extension on the magazine for the Kel Tec p32.
@AK-ky3ou Жыл бұрын
What a sick azz cc piece.
@WalnutandSteel Жыл бұрын
I have two p3at’s they are my every day carry guns
@JungleMonkeyBasketballJunkie Жыл бұрын
I really want one of these but I’ll be getting an LCP max. If you made something with extra capacity I’d be sold
@matthewmoore6619 ай бұрын
P32 V2.0 is on the way I bet - staggered mag increasing to 8-9+1. How about a tribute gun to the HK4(?)- it was a gun kit that had several barrels and an owner could switch between 380 down to 22lr. Kel Tec P32 single-handedly saved the 32 auto cartridge in the US - so save 25 auto - P25 a 25 round mag in a small Baby Browning type gun. Also go into the ammo business and/or make a gun for 32 NAA and 25 NAA. Anyway, thanks for the P32. It has to be the best pocket pistol to date. I appreciate mine and carry it while a G2C and S&W 60-15 sit in the locker at home.
@wp-nv3il5 ай бұрын
I love a black gun on a black background. I could just about see it. Great gun though.
@abc-wv4inАй бұрын
Yes, needed a light background for sure!
@flyontop Жыл бұрын
I have one of these gems… and absolutely LOVE IT! However I just read you guys stop making them; you broke my heart Fredo!!! I wanted to buy one more (new).
@davisbrown3184 ай бұрын
They still make them, they are just hard to find.
@sidneywhite7499 ай бұрын
How can I get a carry case? I have had my 32 for years before the case was offered.
@MayorFuglycools Жыл бұрын
So I have an idea. . . Make a slide that can take night sights Mayor Fuglycool
@BulletBoat2 ай бұрын
Yo, Chad is that you? I saw you on nutnfancy’s p15 vid.
@justgivemetheaccount10 ай бұрын
Unavailable everywhere. Guns like this get people to buy keltec. You need things like this to get people in the door.
@Charsept8 ай бұрын
Mine must be an older model. Mine doesn't lock back on an empty mag.
@paulmcmaster97104 ай бұрын
Dear God please make more
@PopeOfTheBullpuptistChurch Жыл бұрын
Been thinking of getting one of these
@addventure28633 ай бұрын
Still not in stock anywhere
@christopherm.townsend499010 ай бұрын
I just wish the black slides didn't have a finish new out of the box like it's been in the kitchen junk drawer for 5 years 😶
@Dan-mg5dn Жыл бұрын
Can it handle +p ammo
@markh.6687 Жыл бұрын
There is no SAAMI spec for 32 ACP "+P" ammunition, but the pressure can range from 15,000-25,000 psi. The P32 manual states : "SAFETY INSTRUCTIONS AND WARNINGS AMMUNITION: The P-32 Pistol is designed and chambered for the .32 Auto cartridge. Do not use any other ammunition. The P-32 will accept +P ammunition, however not with continuous use." HOWEVER, the manual also states: "Never use nonstandard, reloaded or damaged cartridges.Never use nonstandard, reloaded or damaged cartridges. Never use ammunition where the pressure levels exceed industry standards." So any 32 ammo over 25,000 psi would be nonstandard and out of spec for the P32.
@gunguy834811 ай бұрын
No such thing in 32
@fastvega7 ай бұрын
Underwood has a +p .32acp. I have them loaded in my p-32 now. Replaced recoil spring with a 13 lb one to be safe.
@nfaisnfgay4 ай бұрын
Man these are OOS everywhere…
@Optimization_Coach11 ай бұрын
Should have never sold mine ..😢
@user-cg9nr5rq9u Жыл бұрын
Неуклюжий ведь.
@thomas7770 Жыл бұрын
I won’t buy a Kel tec product. Junk. Customer service (we are too busy to help). Jams
@youkilledkenny85 Жыл бұрын
I went to keltec today to pick up my gun for a repair probably if not the best customer service Iv ever gotten in my life
@mrbee145 Жыл бұрын
They deal with endless boneheads I’m sure. I owned a number off public business and it easy to get burned out after decades. I’ve had nothing but good luck.
@Just1American1966 Жыл бұрын
Uh, okay.
@floridagunrat162510 ай бұрын
Well there is no denying that Kel-Tec products are designed to compete in the more economically priced range of firearms, they have the absolute best customer service that I think I have ever encountered on more than one occasion.