One thought. IF you are having trouble with the shells ejecting erratically, there is a fix. I noticed that in the video you are still using the original Gen3 ejector rod. If you replace this piece with the Gen4 ejector rod you may find as I did that the shells eject in a more uniform direction and pattern. Lone Wolf Dist. has this part for around $5.00. The part number is LWD-30274. You can order it by itself as Bare Ejector Rod. I appreciate the info on polishing the safety catch and trigger bar. Back to the workbench!

Thank you sooooo much!!!! Bending that cross up fixed my issue. YOU ARE THE MAN!!!!

I watched your trigger rest video. I watched several before yours and all mentioned polishing as well as spring issue in slide. Your video is the 1 that helped fix issue. Thank you

I purchased a registered P80 PF940V2 G17 size and polished the trigger bar and changed the firing pin spring and then my trigger became binary 🤯. Went back to the stock P80 firing pin spring and no more binary mode thank god. But i am getting ready to start some different P80 builds. So I’m scouring for videos and info on does and donts and solutions. So I thank you for your videos.

The first issue you described I'm willing to bet is my problem. Thank you.

Hey boss, I watched this video a few months ago for advice. It helped in my case, only now the striker firing pin sheered off so looks like I'll have to get another striker. Gotta love aftermarket MIM parts. Anyways, just came across this video again and wanted to make sure I said thanks, your video is the only reason I was able to figure out my trigger reset issue.

Lol I have done everything you said except a longer firing pin. Thank you sir!!

'Polished the dome'😂😂😂 Sorry, that was funny.

Keep up the great work ur videos are awesome 🤙🤙

Great video! Thanks for sharing!

I've built 2 p80s so far just completed my 2nd one and on both of them I've had the exact same problem and it's the damn shark fin height.. I had to shave down both of my p80 fins.. and my 1st slide was from live free armory and my 2nd is leo precision Symmetry slide.. and both times I've purchased my lower and upper parts kit on ebay... never again..

U got a bad ass build brother

Great content

Thank you

I had an oem trigger housing in my p80 that moved too much. The over travel OC housings off eBay fits amazingly better and doesn’t move at all.

Great video. Hopefully this help with my current problems. P80 and lone wolf 80 Glock 19 clones. Fail to feed, stovepipes, slide gets stuck part way fwd after feed so I have to whack the back of the slide fwd. I was going to polish the ramps and slide rails, then apply more lube. I only ran 1 or 2 mags of rounds thru each, so I thought it could also be break in issues.

The best thing anyone can do for their P 80s or Glocks is the Timnely trigger IMO. Unless a 3 lbs. trigger is to light. I have a lot of Glocks and 3 P 80s. All but one have the Timnely trigger and it a new P 80 that I haven't tried yet. Use the RED spring in the Timnely trigger kit, it will add a little pull weight but makes it much more reliable on the return. I haven't found the need to do anything to the Timnely trigger other than the Red spring. Also I had problems with the P 80 trigger housing, I use factory Glock trigger housing and found they work better for me.

Lol...just kidding man. Nice video. I'm just fkn around.

having a problem where the firearm in in battery one in the chamber . At this point if I try to rack the slide back to unload the round the slide will not come back unless I depress the trigger.????

Geez, nothing like having to re-engineer a Glock.

Great info. Thanks! My P80-32 has an extremely mushy trigger. When pulling it, it goes all the way to the back, sometimes fires, sometimes not. When I release pressure and reapply pressure it usually fires. This is when dry firing, and when loaded (only tried one round). I have oiled it properly, and made sure the trigger bar isn't rubbing too hard on the frame. Any thoughts?

I’ve got the Alpha Timney Trigger in my P80 as well. I can’t get it to reset. Everything installed great. I actually followed your installation video. Any tips on getting the timney trigger to reset?? Thank you.

Your videos are so helpful. Now I am having a "double tap" automatically. The first round fires perfectly and then when the trigger goes to reset a second round fires. Any ideas to fix?

I have a problem with a p80 build that I hope you can help me with. I bought a ryg phantom trigger but it seems like the trigger is not far enough forward, the saftey blade on the trigger hangs up big time on the frame. Have you ever experienced this?

Hey brother. I have a p80 glock26. It fires. It loads.I can cycle rounds just racking. They expell fine. But when I shoot it. It doesn’t expell on its own. I can rack it and shoot again. No problem.

I have a question for you. The trigger resets and it travels perfectly without any play, but it fails to engage it to be in the firing state (cocked) initially it didn't have this issue. Aside from it not cocking you wouldn't be able to feel a difference between this one and one not malfunctioning

Do u think it’s my cross bar angle is my trigger only resets if I don’t have my finger pressing down on it if I do it won’t reset but I took my backplate off and manually pressed in the lug to across the cross bar and it’ll reset w pressure but with a backplate on nothing

My friends P80 worked great for a 100 rds. Then trigger froze. I helped him build, so I said I’d take a look. Removed slide to look and now it goes on but will not move pass normal resting place. Will not move. I hear it hitting metal. I took 100% of parts out and transferred to different lower and worked great. Put 2nd P80 parts in 1st lower, same think. Slide frozen. Sounds like lower, but holes are perfect and everything looks normal. I’m at a loss. Any ideas would be appreciated. Thank you, Joe

Can I please get some help with my issue on gst-9 build. When I dry fire the pistol the slide seems to move forward about 1/2 a mm. I have all glock oem components in both lower and slide. I noticed that the barrel seems to rest on the ejector? Is this how the mechanics are supposed to work? Doesn't seem right. If I remove recoil spring from slide and push back on barrel towards ejector, you can see where the ejector springs back some and the barrel will sit flush with slide until pressure is removed. With the gun assembled and the trigger in the back position (after firing of gun) the barrel is nice and snug as it should in the slide....as soon as I rack the slide and the trigger moves to the forward position that hairline gap appears again (between back of barrel and slide). I have tried switching out all slide internals with no luck. If I remove the slide internals (minus the firing pin) and re-install the slide no gap...re-rack and no gap...fire and no gap...I am lost on this. The only thing I can think of at this point is that the slide is slightly out of spec.

One question, should my shark fin be coming dead center over the top of the plunger?

I’ve built like 6 or 7 P80’s at this point but I just did my first 10mm one and I’m running into an issue I’ve never experienced before and am not finding any solution online. When I pull the trigger I don’t get a “click” it just feels mushy and goes back into place when I let go. I haven’t tried live ammo yet just dry fire. I tried bending the trigger connector slightly as I saw that as a potential solution in a video but that didn’t change anything. Could it be that I need a stronger spring for the firing pin safety? Thanks in advance for any insight you can provide, I’m pulling my hair out over here lol

I have a p80 slide on a Zev OZ9. Purchased an Apex trigger kit and if I rack the slide with the trigger firmly pressed, my trigger fails to reset, if I ever so slightly put some backwards pressure on the slide it releases the trigger and I get a reset. I have a feeling its #1 but I won't be bending it I'm going to try to take off some material from the top since it's so close to reseting on its own. I will report back.

Any known issues and fixes with a P80-19 and Advantage Arms 22lr conversion?

My p-80 fires once and doesn’t shoot, I have to re rack it to get it to shoot, and jams again and yeah it literally a bolt action lol😊. Can you help me?

I have a problem with my p80 slide that I can't seem to find help for online. My slide cycles perfectly with no mag or with a mag, like butter. But if I put a round or snap cap in the mag and then rack the slide, once it resets and loads the round into the barrel and the slide goes all the way forward, it then locks onto something so the slide wont go back again. It's hitting something or whatnot and you have to muscle it as hard as u can for it to release and the slide will then be able to go back, eject the round, but when the slide spring returns it forward again, it's locking shut again. Take the round out and the slide can be racked back perfect. What can it be hitting? It's like the first eighth of an inch of travel back is locking

Uhh mine shoots twice with one trigger pull. Shot I one time at the range and haven't shot it since what should I do? Has agency arms trigger.

I have problem on part 30274 I attached it the gen 4 ejector on gen 3 g19 when I attached the slide doesn't wanna slide till end by ejector tip after metal any help plse any ideas?

When racking the slide, if I hold the trigger back, instead of resetting the trigger, it fires. If the trigger is released, the trigger will reset. Will the angle help me?

Hey, I have an issue with it not shooting where I aim, how can I zero in the gun?

Yeah i fixed the reset problem but now the trigger won’t set back to the original state it’s just reset reset reset now i can’t take my slide off?

My trigger resets everytime except during live fire. It ran more frequent as I fired it but even 300 rounds didn’t solve it. Also got light primer strikes and failure to return into battery. Could it all be one thing doing this?

I have a question my p80 19 fails to fire but when it does it still make a click is that lite primer strike is that dealing with the weight of the spring for the striker system and if so what would you recommend for the best reliable weight for the spring?

Just got a glock clone took it to the range and 20 shots in worked great then all of the sudden started to shoot 3 bullets on 1 pull. Help😊

Mines When I Put the Little Pin on It Wont Rack Right It Gets Hard Don't kno Why, Maybe Need to Polish the Rails

hey so i'm having a problem with my p80 g26. When I rack the slide back the trigger doesn't reset at all unless i push it upwards and no matter how many times i do it it still won't reset. i can send some videos of it but im honestly dumbfounded by what to do. this is my first p80 so i know im going to run into some issues but i can't find any videos that are really having the same issue as me, but thank you if you can help me.

How about on a Glock 43, trigger feels normal with no slide, I put the slide on, trigger resets, but if I press the trigger it’s just all mush and never trips. Then my slide is stuck on the lower and have to remove backplate. Happens 100% of the time

I have a problem if I put the back pin in it doesn’t work but if I have no pin I can reset and pull it

I installed an apex trigger, and trigger bar. It functions perfectly. I went to install the apex ultimate safety plunger and when you hold the trigger for reset it automatically fires. Any thoughts?

My p80 g26 if having problems feeding and ejecting the shell just stays inside it doesn’t come out could tell me what should I do to help fix that problem ?

Any ideas on a Dead Trigger? After racking slide and then pulling trigger nothing happens.. I tried another Slide on lower and it functioned fine. Cannot seem to figure this one out..

Hey Guy, so I went to test my new GST-9 mod1 build, and it randomly shoots full auto or in 6 round Burts. Why do you think this would happen??

I have a p80 I built and almost every time I rack the slide fast while holding the trigger down and then release the trigger to reset it it sounds like the firing pin fires and doesn't reset . I tried changing the spring and plunger it's better but still having the issue.

Another thing: If the trigger bar is rubbing too hard on the side of the magwell it will stop the reset. Just sand it down and smooth it and itll go.

For some reason my rwb mag works well with my p80 I have no problems to feed but with my gen 5 glock 19 mag every round gets stuck on the barrel feed ramp any idea how to fix this problem?

can you drop the firing pin link? getting light primer strikes

Could anybody help me out with binary trigger not working/ not moving completely at all like it’s stuck unless it’s manually handled on myp80 handle. Help ?

I need help why is my p80 trigger hard to pull and my slide wont slide all the way back im using OEM lower parts

Hey Jarg, I have tried my hardest to get the timney trigger to function properly. I have installed and reinstalled at least 5 times. I'm getting failure to reset. I have tried both the red and silver return springs, but still getting the same issue. I am running a minus connector which I have polished. You mentioned you had to grind down the trigger bar for the timney, did you try sanding a few thou off of the frame instead of the bar? Also what were your failure to reset look like?

My Glock 23 slide won’t rack all the way with dummy rounds in whenever it’s racked back n extracts a round, the slide has to be pushed forward, any ideas?

My trigger won't reset unless I'm holding the trigger. So regular racking won't do it except for the first time

My slide moves back when I pull the trigger and the trigger won't fire. Not sure what's wrong

Did you ever hear of the P80 Front Locking Block Pin Or Trigger Housing Pin causing trigger inconsistencies? I left it out altogether and it resets perfectly without it. Is it necessary if the G19 doesn’t have one?

I put the aftermarket slide but the trigger won't go click. Not sure what my issue is.

Hey I made a Glock 20 p80 and have trigger problems completely won’t dry fire lmk if u could help.

How can I email you? Have a video I’d like to send you of mine and get your thoughts.

What kit is that ?

my slide won’t rack all the way back

my trigger won’t reset unless i rack the slide twice, how do i fix that? what is the issue causing it to do that? the trigger bar kinda seems a bit high but i’m not sure if that’s the issue.

Help! My slide seems to behave, but my trigger just gets heavier and stiffer with every pull until it locks up. Then I have to rack it a bunch to get the trigger to brake.

I need help, tried all things you listed.

Edit for: 🖕 CNN !!! 🖕 Also, round off the plunger and make sure the extra material is cut out really good in your dust cover where the recoil spring channel is in your P80. That's always a big issue. Great vid 👍

who has good after market rails

I THINK THE MORAL OF THE STORY IS USE GLOCKT STOCK PARTS

M ppl

Hey man I just uploaded my video can u check it out and tell me what I did wrong with my trigger please!

Why does this guy have two loaded magazines next to his firearm on the table?....just saying 😮😅😅😊. #1776

I need your help on troubleshooting my 43 is therea away I can get your email or something else so I can send you videos of the issue I’m having?

Don’t heat up the cross bar. It’s not needed and bad advice to give because someone is going to ruin the heat treat on their cross bar.