How to resurface an old bathtub with EKOPEL 2K. Complete guide 2021.

Рет қаралды 32,873

EKOPEL 2K Bathtub resurfacing coating

Күн бұрын

00:00 Work description
00:25 Remove old paint from the bathtub
1:35 Silicone removal
2:47 Wash bathtub with cleaner and then dry a bathtub
8:40 Protect tiles with masking tape and plastic wrap
10:38 Protect drain holes
13:28 Mix EKOPEL 2K bathtub coating
18:05 Pour bathtub coating over the bathtub
27:23 Level the bottom with the notched spreader
31:03 Heat surface with a hair dryer
35:59 Remove excess material from the drain hole
39:16 How to remove any drops
40:40 Remove masking tape from the drain hole and attach a plastic cup.
42:55 Reinstall the drain ring and turn on the water
This is amazing technology of old bathtub resurfacing. EKOPEL 2K material is applied.
Odourless, easy-to-use, friendly to environment. And more durable than regular roller enamel.
Buy EKOPEL 2K on Amazon UK: amzn.to/3lQEpeM
Buy EKOPEL 2K on Ebay: bit.ly/3DuQdsY
Buy EKOPEL 2K on our official online shop: bit.ly/3Az3COX
More information about EKOPEL 2K and bathtub renovation on ekopel2k.com
All 🇬🇧 UK orders are shipped from our UK warehouse. FREE customs procedures! 2-day delivery.

Пікірлер: 60

@docdoctme 2 жыл бұрын

Wow! The best Ekopel video- so detailed with instructions. Thanks for sharing.

@EKOPEL 2 жыл бұрын

thank you!

@dawnmann5256 2 жыл бұрын

After watching this video and the updated one from Refinished Bath Solutions, I feel confident in my ability to tackle this project and can't wait to turn my tan tub into a glossy white stunner! Thank you!

@veronique2610 2 жыл бұрын

Amazing video. Thank you for showing step by step and so clearly as to what to do during each step of the way.

@jaimegonzalez6926 Жыл бұрын

Love the music well done I'm ready to paint my tub thank you so much.

@Brian-cf8ki 2 жыл бұрын

god bless this handy mans handy hands

@beckjuly100 7 ай бұрын

This is an incredible tutorial. Thank you so much for your expertise, time, and willingness to share it with us. I do feel confident that I can do the job myself now. Best regards and cheers!

@victorslyusarev7709 Жыл бұрын

Great job brother ,thanks lot

@markchatterton4058 2 жыл бұрын

If you don’t remove all of the old coating, and that becomes unstable and delaminates or start to lift ,then would it not then ruin the job later down the line, removing the old coating is a real job in its self, I know as I have done so many times, when re,surfacing baths, but I don’t like trusting a previous contractors coating. I would love to switch to this method, and eliminate having to strip what can seem to be a stable coating in some circumstances , but would be a nightmare to have to return to a job , and strip this and previous coating back to the original enamel,to start again. Love the great details you are putting into your instructional videos,it’s a great product.

@komodosp 15 күн бұрын

It wasn't really flattening on the tops of the walls of my bath so I used a paintbrush - a single stroke along the length - seems to have nicely smoothed it out, but had to sacrifice the brush!

@komodosp 15 күн бұрын

Thanks for the tutorial, it really helped me a lot, but could have done with a practice go first! My surface is not the smoothest, however, as in some of the areas where I poured did not flatten out fully and there are some bumps especially on the curved ends of the bath where it would have been flowing down. It took me a few hours to complete the job (ironically because I was trying to smooth out the surface!) Could it have thickened a little during this time and that be the reason? Can I sand these down or will I lose the glossy finish and be left with a scratched surface? I held back some of the stuff without mixing in case any touch-ups were needed - how long can this be stored and how best to store it?

@ubacow7109 11 ай бұрын

How hard is ekopel is it like a hard plastic or like a PVC softish plastic?

@Partywiththebigdog 3 ай бұрын

Can this be tinted?

@rogelioflores241 5 ай бұрын

Can I find the white material on Amazon?

@realbrave 2 жыл бұрын

I am preparing to resurface my old, cast iron bathtub. My tub has peeling spots from a previous resurfacing which I was planning to sand down the edges of to smooth so that the new surface can properly adhere to it. I also bought porcelain filler, but I don't think I need it. It looks like that's what's been done in this video, i.e. just sanded down the peeling spots, but in the narration it says to remove the old finish if it's peeling. Can someone tell me if I have to completely remove the entire old finish or if I can just ensure the peeled edges are sanded smooth before cleaning then application.

@1lilti 2 жыл бұрын

Need to know also !!

@EKOPEL 2 жыл бұрын

If you can't effortlessly peel off the old paint, you can leave it. But you should try to smooth out the edges of the old paint on the walls and sides of the bathtub as much as possible.

@rabb1t548 2 жыл бұрын

My paint started peeling off, did I do something wrong? Should I add a primer like STIX next time?

@EKOPEL Жыл бұрын

Hello. Could you please contact us by email. We need to know what happened because usually primer is not needed.

@tapx1707 2 жыл бұрын

Was it necessary to show the prolonged stirring of the mixture ?

@EKOPEL 2 жыл бұрын

Stirring should be properly and for at least 10 minutes

@imanonattorneyspokesperson 2 жыл бұрын

👍ikr...and I'm like "There's no way I'm going to be able to coat the outer edge ( facing me ) before the bottom without coming in contact with that edge".... Not really understanding why you can't just work from the inside out [???]

@brendawoodhouse8339 2 жыл бұрын

What type of cleaner do you use on the surface in order to keep clean but not damage the resurfacing coating? I don't want to have to repeat this process any time soon.

@EKOPEL 2 жыл бұрын

You can use any cleaner designed for bathtubs. But after you have poured the cleaner onto the surface, you need to bring it to a lather immediately.

@arinpounov369 Жыл бұрын

The material at the bottom of the tub ends up being very, very thick. Is that correct? Will it still dry ok? This video also doesn't mention the high (air) temperature the bathroom needs to have like other Ekopel videos do, is this not important anymore? I don't want to cook in the room if I don't have to.

@EKOPEL Жыл бұрын

thick material at the bottom is correct. it will dry ok. the normal bathroom temperature is +22-24ºC

@chazmithnewton9989 9 ай бұрын

Do we have to remove all old paint or glaze if it’s not peeling? It looked like the tub was coated with something but it seems thicker then paint.

@EKOPEL 9 ай бұрын

There is no need to remove all old paint if it is not peeling off. you need to remove the parts that are peeling off, sand the top coat of old paint and smooth the transition between old paint and bathtub.

@milenrrz 6 ай бұрын

Did he just stir that for 23 minutes??

@1lilti 2 жыл бұрын

If I have a tub that has been painted before, but is peeling. Do I have to remove the entire previous paint coated or just scrape the loose paint and sand down .

@EKOPEL 2 жыл бұрын

It is important to scrape off all the paint that comes off. Paint that adheres properly can be left on.

@benjaminbusibenny6756 Жыл бұрын

To me, that depends on how much you can trust the work prior to your refinishing. For me, I'd sand it just to prevent the guesswork. It wouldn't take long with a sander. I'd love to make you all a video of how I started and finished.

@brianglover3126 8 ай бұрын

It appears you did not mix the entire kit to resurface this bathtub? Iam doing the same job just the interior of the tub so how much ekopel should I mix up? What is the ratio of the two part epoxy when not mixing the entire container?

@EKOPEL 8 ай бұрын

Mixing ratio 100:17,5 (A:B)

@CHARITYFIPPS 2 жыл бұрын

What grit sandpaper?

@EKOPEL 2 жыл бұрын

150

@cimmeriian 2 жыл бұрын

Are you the EU ArmoGlaze 2k or is ArmoGlze 2k the US Ekopel 2k?

@EKOPEL 2 жыл бұрын

It's EKOPEL 2K. In the USA or Canada you can find it here refinishedbathsolutions.com

@rogelioflores241 5 ай бұрын

What’s the name of the material inside the white bucket

@rogelioflores241 5 ай бұрын

Can I find it in Amazon?

@brownsugar9942 2 жыл бұрын

This product looks great. Where can I buy this product in the UK, it is no longer available on Amazon UK. Is it still being produced? Thanks

@EKOPEL 2 жыл бұрын

We will restock at Amazon UK in 2 weeks

@brownsugar9942 2 жыл бұрын

Excellent. Thank you for your prompt reply.

@Perdz204 2 жыл бұрын

When can you recaulk the tub?

@EKOPEL 2 жыл бұрын

depending on the temperature in the bathroom.. usually 24-48 hours after the application of EKOPEL

@imanonattorneyspokesperson 2 жыл бұрын

2 questions... ) My kit came with a roller, Not a spreader...Do I use it in the same manner? ) My kit came with "2K-24" part B epoxy, Not "2K-48" as shown in this vid...Is there a difference between your kit and mines and regardless, Is the application process the same? ...I'm starting to lose confidence in applying this coating...Seems a bit meticulous. I was expecting a more "one-step/apply & dry" aproach but great vid tho👍

@EKOPEL 2 жыл бұрын

Hi. You got USA version of our product (24 h curing time, application with roller). Please watch this video before pouring kzfaq.info/get/bejne/rbOgZ5ST06y8c58.html

@liberty-yr9us 2 жыл бұрын

So… you spend several hours cleaning and prepping tub, but then put tape on surfaces and don’t have to worry about removing the adhesive? Did I miss something here? Will the finish adhere of there is tape residue on the surface?

@EKOPEL 2 жыл бұрын

At the end of the work we remove the masking tape everywhere

@dianevessels2632 Жыл бұрын

Do you have anyone near Fort Smith, Arkansas who can resurface my bathtub?

@stellashaffer864 Жыл бұрын

Why’d you start pouring it on the front first? Pour it on the back and sides and you don’t have to worry about getting on yourself. Silly goose

@DG-fe4ht Жыл бұрын

That tile job is horrible! Tiny pieces at bottom? Wow.

@FraidyMan Ай бұрын

Why in heavens name would you cover the outside wall before you did the inside of the tub?

@galvestonbragg9718 Жыл бұрын

Informative, but omg why include him stirring among other things for so long!? Rediculous.

@EKOPEL Жыл бұрын

Stirring is most important process

@catswambo9706 Жыл бұрын

The music is irretating and stressful to listen to. Please stop this adding of crapmusic to DIY videos

@catswambo9706 Жыл бұрын

Nope could not finish watching ....... uuuughhhh that muuuuuzzzaaakk

@anamachado9069 2 күн бұрын

I was not too fond of the music, so I turned the volume down, watching his work was more important than the music. Excellent video. Thank you.!

@johndavid8240 Жыл бұрын

Stay away from this company horrible customer service. The product is just OK you’re better off going with one of their competitors you have been warned.

@EKOPEL Жыл бұрын

Could you tell us which country you are from? We need to understand which distributor you are talking about.