Busting FAKE Internet Welds, and Doing Them Better.

Рет қаралды 1,186,278

Ай бұрын

When setting out Busting FAKE internet welds it's easy to find stuff you'd do differently, but it always gives us the opportunity to learn. In this episode I go over a few common things we've all seen on the internet, and what we can take from them to level up our welding and grinding game. Let's go!
👇TAKE A FREE ONLINE TIG WELDING CLASS👇
www.pacificarctigwelding.com/
---------------------------------------------------
PART 1 WHERE I WELD THESE JOINTS👉 • I found a joint 95% of...
Watch Justin's part 1 of this episode at Fabrication Series HERE • Busting Fake Internet ...
EPISODES WHERE I GOT MY IDEAS FOR THESE JOINTS!
• This Is How To Weld Pi...
• 2 BEST WELDING SECRETS...
💎My favourite Tig Welding Cups💎USE CODE Pacific15 for 15% off at checkout💎
edgeweldingsupply.com/sales/P...
CHECK OUT MY FAVOURITE WELDING GLOVES HERE
🔥BADASS Defiant Metal Welding gloves 🔥
bit.ly/PA-DefiantMetalHome
💚Everlast Tig Welders💚
www.everlastgenerators.com/?r...
🔥Heatwave Eye Protection🔥
heatwavevisual.com/collection...
🔥USE CODE ARCTIG10 FOR A DISCOUNT AT CHECKOUT!🔥
💛CanaWeld Tig Welding Machines💛
www.canaweld.com

Пікірлер: 479

@PacificArcTigWelding Ай бұрын

Watch my first episode where I weld ALL these joints👉 kzfaq.info/get/bejne/rLCoa6SVnMvUqp8.html TAKE A FREE ONLINE TIG WELDING CLASS👇 www.pacificarctigwelding.com/

@shaun-o4360 Ай бұрын

when are you going to get a tig torch back cap that looks like a butt plug?

@Alfred-Neuman 26 күн бұрын

I agree with you! It's important to have good penetration... 😂

@ntshade8806 13 күн бұрын

because no one likes to be fooled, and this guy explains well

@barryliebich3993 11 күн бұрын

Knowledge is power

@Truesightinall 3 күн бұрын

Ok I just have to say it. You kinda look like Hank Azeria. Or am I the only one?!

@PixelSpect 27 күн бұрын

Why am i watching this? I don't even have a welder.

@royhuybregts7522 27 күн бұрын

Lol same but these damn welding vids do come by. I dont know why though....

@silviog.4211 26 күн бұрын

That's a good point.

@silviog.4211 26 күн бұрын

That's a good point.

@noxmodel0015 26 күн бұрын

I also don't have a welder but here I am.

@tHa1Rune 26 күн бұрын

Thanks for helping me catch myself in a brainrot spiral

@greymane_gaming3435 Ай бұрын

The guy that taught me to REALLY weld... he handed me a file and a grinder and said: "These are the tools you will use the most. Learn how to use them." 25+ years later... I can confirm. I spend FAR more time grinding and prepping metal for welding than I do on the welds.

@paulkurilecz4209 Ай бұрын

I think that 90% of a good weld is in the prep.

@zerosen2141 29 күн бұрын

@@paulkurilecz4209 Been welding for 10-odd years, easily 80-90% of the job is preparation. Getting the parts you need, breaking (bending) them as/if needed, surface cleaning, work space prep, dry fitting and tacking parts in place to ensure everything fits correctly, replacing parts that don't because someone screwed up somewhere in the chain (happens more than one realizes, usually blame the engineer or CAD person). And then, once everything is together, then you weld out. After welding, you've got more surface cleaning, weld dressing/grinding if required, adding additional parts that could not be added before.... The process just goes on and on depending on how complex or large the part is, but it's very easy for me to say that, as a welder, I spend maybe 10-15% of my working day, actually welding. The rest of the time is spent either inventing new curses while getting parts to fit together, marking parts before assembly, or waiting on parts to be made.

@andrewwatts1997 29 күн бұрын

@@paulkurilecz4209 It's how batman always wins PREP TIME. Be like batman. Weld like batman 😎🦇

@brettweltz8135 29 күн бұрын

My grandpa was a naval engineer and he taught me. “ 95% of any job is prep and 5% execution.” Having jumped all around trade jobs. I can’t confirm he was in fact, correct. I have often done better quality work than veterans of industries like plumbing, electrician, fiberglass repair, and paint just because I spent more time and effort prepping.😊

@secularnevrosis 28 күн бұрын

@@brettweltz8135 This is true. If you don't take the time to prepare your welds you will spend all of the time trying to fix the problems that comes from not spending enough time.

@thepagan5432 29 күн бұрын

I passed my mechanical engineering apprenticeship 50 years ago. Our welding instructors were brilliant, and prepared us for a lifetime of engineering. Your instructions in this post were spot on, you have weld preparation which often took longer than the welding to do. Having the amps too high can cause undercutting, which can result in a weakened weld. Good post, thank you. 👍

@JDR71326 Күн бұрын

I'm looking to go into mechanical engineering apprenticeships. Is it a good choice? What was your experience?

@MatthewSmith-xt6vc Ай бұрын

That trick with the tape got me like " In all my 40 years, your tellin me..... aint no way!"

@Astronopolis 28 күн бұрын

*breathless sputtering sounds *

@2mD 28 күн бұрын

tape works well if all you do is use scotch hand pad. but if you want to use power tools it will not hold up because it gets too hot. For that i always use 0.2mm Stainless steel foil ( and some double-sided tape ) which works great :)

@itwasme2435 25 күн бұрын

@@2mD thanks

@martijnjonkers2179 10 күн бұрын

Cross over!

@thomaswakefield6889 Ай бұрын

it's really sad how many welders don't know simple things like this. what's even more sadder is the fact that they don't teach things like this in shop classes or tech schools

@melgross Ай бұрын

They have to teach the basics. Unfortunately, many students take an entire course just getting decent at them. More advanced techniques have to wait until people’s skill levels are good enough.

@alejrandom6592 Ай бұрын

More sadder indeed

@mat650 Ай бұрын

It's sad that they think every weld must be grindrled off... if not for specific aesthetics leave the weld alone where it is..

@Armand79th 29 күн бұрын

It's a subject better left to vocational colleges.

@gairahadam5304 27 күн бұрын

That's why fake artisan have more viewers than real artisan

@nateatgoodmayhemracing4597 Ай бұрын

As a degreed welding engineer, I confirm that everything @PacificArcTigWelding is stating is correct. Thing thank you for sharing content like this--it holds the world together.

@rodanone4895 Ай бұрын

quick question. which school? Ohio State is the only one i know with a BS in welding engineering. that's based on a comment made by Thomas Eager in his fusion welding class. just curious. cheers!

@nateatgoodmayhemracing4597 Ай бұрын

@@rodanone4895 Letourneau University! That's where I went. It's fancy formal term is Materials Joining Engineering. Between LeTourneau, The Ohio State and Ferris State, that's it for formal engineering programs. If you want to go Welding Engineering Tech, that opens up to additional colleges like Cal Poly, Penn State and more.

@nateatgoodmayhemracing4597 Ай бұрын

@@rodanone4895 LeTourneau University! There's actually two in the US. The Ohio State and LeTourneau are the only two with formal BS Welding Engineering degrees. Once you go Engineering Technology, there are more, like Ferris State, Cal Poly, Penn state to name a few. Ohio State's program is definitely the largest. For every ten that graduate from Ohio, LeTourneau will graduate only one.

@nateatgoodmayhemracing4597 Ай бұрын

@@rodanone4895 LeTourneau University! Between that an The Ohio State, there's actually two universities with the formal BS in Welding Engineering in the US. If you expand it to Engineering Technology, Farris, Penn State, and Cal Poly are options as well. The Ohio State's Welding Engineering program is much larger than LETU. Ohio graduates ten students for ever one LETU does.

@rodanone4895 Ай бұрын

@@nateatgoodmayhemracing4597 thank you so much for this. I'm an EE by trade. I worked on a MIG supply for a customer... then was hooked... next i found the MIT lectures on metal.... there's so much to learn. then there's the simple joy of developing a process and refining it. I'll check these places out. familiar with Penn State. did not realize.....

@nixxonnor 28 күн бұрын

I know nothing about welding. But what Pacific ATW says in this video all make really sense. Viral videos are mostly worth nothing, other than inspiration or ideas for doing something properly

@michaelyoung7261 29 күн бұрын

Really good advice. Amateur welder here, mostly doing stuff that just needs to hold together and doesn’t need to look pretty, so it’s great getting tips on things I can do to make it look more professional and polished without doing much to my actual weld

@plasticlawnchair7197 26 күн бұрын

Me who has never welded, doesn't watch the fake weld videos, and doesn't plan on welding watching this KZfaq video start to finish

@redneckartist654 22 күн бұрын

I felt this 😂

@Kyle-nm1kh 7 күн бұрын

Same. Might pick it up as a hobby later in life if I get bored so ill sub

@johnpope4464 Ай бұрын

No matter how small of weld ,I weld like someone's life depends on it.

@Glocktologist 28 күн бұрын

This is a great principle and can be applied to so many things. ”What does it matter? No-one is going to see it or care.” - Even the most insignificant job you do is a practice run for the jobs that do matter. Use them wisely.

@nickkozak4763 23 күн бұрын

plus you can actually get paid better for work.

@Kyle-nm1kh 7 күн бұрын

It's called integrity. Both character integrity and structural integrity are on the line

@DarksideSleemo 27 күн бұрын

I really appreciate all the hard work at the end to clean up the final product. None of it was strictly necessary for the overall point of the video but it really just goes to show the care you take in your craft and definitely sets your work apart. I'm a terrible welder but I spent a lot of time working in a cabinet shop so I can manhandle a DA sander like it's nobody's business. This is such a throwback to that time.

@TheFabricatorSeries Ай бұрын

Solid vid! Thanks for the shoutout!

@EngineerJerry Ай бұрын

Great video. I did tack-up on a cut-to length line so all my welds were removed. I never got the knack of putting down a great bead, but I never get tired of watching a great welder work.

@dr.emmettbrown9359 26 күн бұрын

Just wanted to say thank you for sharing your online classes for free. I figured I'd watch one and see what I thought and it helped me decide to finally go buy a MIG welder and start learning! 😁

@DanTuc 5 күн бұрын

I have learnt so so much in this video. I have been powder coating for 8 years, polishing for 2 and been a mechanic since I’ve been a little boy lol. I’m about to start school for welding here in just two weeks. With all the experience I have your video has taught me so much in just a few 15 minutes. Can’t wait to start watching more thank you

@thephoenixking1086 26 күн бұрын

My Grandfather Erik used to be a welder, all the way up to his passing in 2007. I myself am not a welder but I have always wondered what the career is like, this is a great video looking into that. - I would never have thought about adding a bevel but now you showed me, it makes a tone of sense, it kinda reminds of how when you use epoxy, you want to rough up the surfaces to make sure the glue adheres better (a smooth surface = less adhesion thus a joint that can break).

@user-pw8qj2gt1p Ай бұрын

Love your presentation. This is great info. I just subscribed. I look forward to seeing more!

@valanshard2105 Ай бұрын

I know it's not welding but all the sanding and stuff too is very helpful as well

@papierbndc 25 күн бұрын

Im not into welding, but youtube brought me here. It was just satisfying watching you do your work. Love it. great video!

@BlackEpyon 27 күн бұрын

As a self-employed landscaper who repairs his own tools and equipment, I've got first-hand experience in how my own bad welds have failed under load (not to mention store-bought stuff that was never welded properly to begin with!), and learning to correct my mistakes. That makes me very frustrated when I see these KZfaq Shorts/TikTok "welding" videos, and even I, as a self-admitted non-expert, can tell everything they're doing wrong! Which leads me to one very penetrating question: WHY CAN THESE PEOPLE NOT LEARN TO RUN A BEAD!?

@michaelallen1432 27 күн бұрын

I like how he spends so much time explaining how to grind it, which can be as important as the weld if it's a cosmetic part.

@RadddahTat 7 күн бұрын

This is so well done for a welding video lol I love it, great job

@Titot182 26 күн бұрын

Man, if you ended up with a diploma in welding engineering, metallurgy, appreciation of stress analysis and weld design, you'd be unstoppable. I always respect and admire guys coming off the shop floor who are proud of their craft. As a welding metallurgist, I find them to be best guys when it comes to having a very good handle on structural integrity. Can't weld for shit, but can tell what would happen to your fatigue life if that undercut or porosity isn't addresed. In some applications, grinding of the weld toes and excess weld metal or reinforcement is a must, lest you want to be dealing with stress corrosion cracking in austenitic stainless. Not so important on a carbon steel hardtail rig.

@Dial8Transmition 27 күн бұрын

For some reason making a groove for the welds that need to be ground off never occurred to me, but it makes so much sense

@BaobobMiller 29 күн бұрын

Nice, concise, and instructionally informative. Thank you.

@stellasdoesstuff 29 күн бұрын

I have never welded before. I don't know why this video ended up in my reccommended. I loved watching and learning about welding 😊

@AcornFox 27 күн бұрын

Never welded before in my life but this makes me want to suck at it for a good while. So cool!

@ajsorensen2585 Ай бұрын

Dusty I think also watching the MIG passes, they didn't use a lens shade on the camera, so that makes me think the second one is fake, Thank you as always for all the great videos!

@wargamingsupernoob Ай бұрын

I appreciate this. I saw the video Justin made when it came out. Working in a fab shop, we try and make the joints easy for fitup. It's up to the welder to get fusion and penetration after that. I take my work seriously and question anything that can't be done by a simple joint I see online.

@Dunkopf 28 күн бұрын

A good fitter makes a good welder.

@judethomas441 24 күн бұрын

Been wanting to get a career as a welder so this video and channel are great! Thanks for the free help and tips, it is very nice to see

@DeadFront1319 Сағат бұрын

Satisfying and informative video 👍

@gregwilkins7649 Ай бұрын

Looks like you are having some fun. Cool stuff Bro

@Genschannel 11 күн бұрын

Love your videos im learning so much, keep on keepin on mate, one question tho What sort of bandsaw do you recommend for cutting alloy? Or blade to fit one, thanks bud

@GaryLiseo 8 күн бұрын

Did not realize the flap disk tip. Thanks for that, I’ll use the knowledge to make my welding table look (and hopefully function) better

@RurouniHiro 24 күн бұрын

Thanks for showing the proper welds and methods. I had never taken the welding in those videos seriously, just the “intended” step. And more for the conceptual cuts for the bends to be welded and not for weld technique. Like origami, and making an example fold but nothing in particular and using tape or dot of glue to hold it for the photo op.

@chowclelie9402 21 күн бұрын

wow an amazing job. Full of tricks and details, so practical. Thanks. My boss and I like your videos alot.🤝

@douglasboyle6544 20 күн бұрын

Amazing tips here. that miter trick? Simple but mind-blowing.

@joshharrison9054 27 күн бұрын

Never seen your videos before, but I definitely saw that Sumerian Record sticker, good taste ;)

@Gebunator 25 күн бұрын

Man, I work in construction and that means sometimes getting to see and experiment professional welders and their products... Half of them are "professionals" and especially after seeing the work done in this video. HOLY SMOLY; That's art, man.

@czar89031 23 күн бұрын

To be honest, i love working on wood in USA especially Japanese style connection with no glue, nail or screw but when i retired, i stayed in Thailand, woods in here are so expensive it cost me arm & legs & the prices are so outrageous that sometimes there are tiny hole where baby termites had live inside & they excavate it into a powder, i made up my mind to use metal in making household furnitures like a homemade kitchen or bathroom lavatory or sink, metals in Thailand are cheap & everything came out on recycle scrap metal melted & reform it into long 1x2x32 meters in different sizes, this is where i started & learning how to hold an electric welding equipment & connect two metals together by the use of welding electrode, i check every welding channel to learn more & i am fascinated from your program how clean & straight on your work & so organized your metal table is for welding process, thank you for showing me your educational video & subscribe from you channel

@ypaulbrown Ай бұрын

Great Information Dusty....cheers from Florida, Paul

@PacificArcTigWelding Ай бұрын

Hi Paul! I really appreciate you checking out this episode, looks like I might be headed to Florida for fabTech , maybe see you there!

@Excentrix54 24 күн бұрын

Justin at the Fabrication series is that man. Great content

@kontruksi317 29 күн бұрын

thank you for the lesson from your video, good job sir 👍👍

@TrendDIY 19 күн бұрын

The knowledge you share is really useful. Thank you

@Shirazzikkdh 11 күн бұрын

Definitely gonna pick up a Welding class next year.

@juanpablosaenzcastaneda4643 27 күн бұрын

Mannnnn! Your work is delightful!

@krissrock 27 күн бұрын

hey Man, nice video. FIrst time viewer. I think I would have really liked to have seen a strength test between the proper welds like you did, vs the fake welds. just really drive your point home

@umbratherios5614 9 күн бұрын

Good heavens, those close-up shots are beautiful.

@Denmon0728 13 күн бұрын

So I used to weld a little bit at a shipyard many years ago but these days I do 3D graphic design and what really stood out to me is how you use light and reflections on the surface to determine how clean the angles on the surfaces are which is exactly what I do to inspect the topography on my 3D models, by using a glossy material and rotating the object to see how the light falls on it. Just thought it was funny how some of the techniques used in real life are the same as those when working on virtual things :D

@LuciusFaith 9 күн бұрын

ok this is first episode of introdutury welding at farm boy level! this is so neat! really perfect in showing dos and don'ts but many mistakes even in the dos! but nobody got time for that! if its supposed to hold 3 tonnes even though a 20 tonnes weld would be the perfect choice you save time i get it! do you do advanced class b and a welds! would very much be interested in improving my skill!

@myfinalheaven9590 25 күн бұрын

I don’t know how to weld and I found this useful. Great concise explanation

@deltajohnny 29 күн бұрын

Great video and welds! 😍😍😍

@RandomBradCreator 27 күн бұрын

Excellent Vid , Cheers Mate 🍻

@richc357 25 күн бұрын

I have no need or much interest in welding. But I am very impressed with your videos. You are an excellent teacher.

@bufuhl1869 27 күн бұрын

I have never welded anything or had the want to weld anything but after watching this video i feel like i could weld decently well and find welding pretty cool

@drewjohnson6583 Ай бұрын

I have a question, can you explain when or why you would (walk the cup) vs the regular dab style. I've been watching alot of ur videos and other random shorts. And I see both styles. I recently got a machine but haven't started yet. And I'm curious of the 2 methods.

@Mark_Agamotto1313_Smith 25 күн бұрын

Just out of curiosity, would the same bevel prep be helpful if you are doing OA welding?

@MrCrazyGameGuy 25 күн бұрын

This is such a niche video subject; I have no idea how I ended up here. One second I'm watching Bobby Duke make a banana knife, next second I'm watching a video about welding.

@TheBlibo 26 күн бұрын

Hi from the uk From my perspective if you have to grind a weld off to tidy the appearance then the weld was most likely a poor weld, a good weld is a thing of beauty to be shown off. I know its not welding but look at the late 70s Harris magnum suzuki frames they were bronze welded and truly great to see Keep up the good work

@simmang18 24 күн бұрын

my brother-in-law was a boat builder/welder and his welds were beautiful like a pro and like you he prepped his areas as well i knew this much but i've always wanted to learn how to weld but cause of his job he had no time to teach me. so what's best for beginners? TIG welding, arc welding, MIG welding? I thought TIG welding was the best option for any welding period or am i wrong here? does it really matter what type of weld you use for any projects?

@RemedieX 24 күн бұрын

Never welded, I want to get one now and start practicing lol. Been wanting to for a while

@AllOutCabinets 27 күн бұрын

As a professional custom cabinet maker I appreciate how you explained your sanding and grinding process. 👌👌👌🤘

@dave_ecclectic Ай бұрын

While being a Firewatch for the welder welding a SS pipe I noticed he wasn't using any rod. He was finished but was going over the bead just with the TIG torch. When I asked him what he was doing he said he was _washing_ it. He explained it a bit but have noticed on all the vids I have watched no one has brought up _washing._ And I haven't seen anyone doing it.

@Useruserusername790 Ай бұрын

If it was the cap, what he was doing is cleaning the oxide layer off using the Argon that comes out of the torch. Same idea as purging the oxygen out of the inside of the pipe using Argon. An oxide layer will make a black sugar on the inside. Any inclusions of anything other than the weld metal will make the weld weak. Even a tiny bit of rust.

@dave_ecclectic Ай бұрын

@@Useruserusername790 So, instead of using a brush or sandpaper he was using argon? I'm pretty sure the torch was live and remelting the weld...it was a long time ago. This was also a pipe and I believe he welded it in multiple passes.

@Useruserusername790 Ай бұрын

@@dave_ecclectic if he was welding without a filler rod then yeah that's wrong. That's not what Cleaning means. To "clean" you stop the arc and use the Argon to blow off the oxide layer just like using a Airduster to blow a layer of dust off of a surface. You sand the metal shiny before you weld on it. But with Tig all it is, is an oxide layer there's no Flux like stick, Mig makes a glass layer.

@dave_ecclectic Ай бұрын

@@Useruserusername790 He wasn't really welding as that was complete. He was, If I remember correctly, remelting the last or top metal and rearranging it. The process was slow, so I don't think he was doing anything special with the argon. He didn't say he was cleaning it. he said he was _washing_ it. BTW his weld looked just fine before he washed it, to my untrained and casual eye.

@Useruserusername790 Ай бұрын

@@dave_ecclectic cleaning it or washing it is the same thing. Just think about a solid stick being melted, while it's molten it can get airbubbles in it from oxygen argon keeps oxygen out. And when a Bead of weld is cooling oxygen tries to rush back in and that's why Tig welds get those Heat colors you see on Pretty tig welds. That's an oxide layer but it's not a rust. Stainless steel has nickle in it and nickle is what gives it the antirust property the chrome in it gives it the mirror look.

@grug1132 24 күн бұрын

what camera/ lense are you using to take video of the welding. I've never seen such clear closeups of welding like that

@bobross07 Ай бұрын

A soft backer interface helps a ton with dishing and keeping rounded edges uniform. If you're into this type of stuff.

@rogerrock12games 25 күн бұрын

I learnt in sheet metal school, but was never any good with it despite how much i enjoyed it. These are excellent tips.

@martinjelinek1382 5 күн бұрын

Your theory is partially correct. Tacking thin materials with enough current together does give it deep penetration and will hold just fine.

@bojanjovanovic4665 23 күн бұрын

Nice video, an eye opener for sure. Consider one friendly advice. Too many people think they are welding gods, and there is too many "I"s in the video. It's not a sales channel it's an educational one

@thekiwiclan 17 күн бұрын

Is there a reason that the tungsten tig looked rounded in the close up shots of welding, I always things it was supposed to be sharpened to a point for best welding?

@ezrollergbg 14 күн бұрын

This so different to the kind of welding work I do myself. I mostly weld stuff that is getting repaired, like farmers equipment, excavator buckets etc and build simple things like supports for water tanks, lifting boom for my own tractor loader etc. The key words in my work are strong, sturdy and not taking too long. I prepare my welds of course by removing rust, paint etc. And of course beveling where needed. But a lot of the time I have to quickly build up space in cracks etc and looks isn’t the thing. My welds pretty much never breaks. I use two different ESAB MIG/MAG welders, an LKA160 (230V) and an older 400A 3-phase 400V. Even though my stuff is so different from yours it is still interesting to see. And don’t talk MIG/MAG down: bridges, wind turbine towers, piprlines and ships are welded with this techno today. It is all about how you treat the things you have on hand. 😎

@devultra1125 27 күн бұрын

General question. I learned how to weld, and I know you somehow need to dispove the heat into the meaterial for a proper cooling, but what If I have top weld at a spot, where the heat only can dispove at one direction, and there is a huge risk of the weld and material just floating away, because of the bad heat dispove?

@CR3W1SH03S 26 күн бұрын

The difference between doing it fast and doing it right. Well done.

@brandsandempires 26 күн бұрын

Zero interest in becoming a welder, but this video is amazing. Those welding shorts are everywhere and this calls them out so well.

@snrkybrd 25 күн бұрын

interested layman here. this video is like a work of art, truly everything wrong and right about the internet wrapped up in a neat little bow. (that being, genuine people with love & care for their craft, and grifters)

@Chewchewman 27 күн бұрын

I like that the grinding/sanding thing is similar but logically more intense than working with wood

@borizzz 7 күн бұрын

Question: If you don't bevel the edges but leave a 1-2mm gap between the faces, doesn't the weld find its way down?

@family_adventure23 24 күн бұрын

Good explanation when you weld with tig, mag system but welding with electrode or with KEMP things are little different

@Mamiya645 27 күн бұрын

I've suffered from fibromyalgia since I was 19, soon turning 44, intending to become a licensed professional welder via a special course over here in Sweden. Good video - I have the right stuff in my head already and look forward to the future, I called BS and facepalmed at those viral videos that give no regard to treating the material before or after. If I didn't know any better I'd say they explain a lot of tofu-dreg incidents.

@captainyrolian4086 25 күн бұрын

while watching, i noticed that your TiG welder has a round tip on the end of the tungsten rod, why is that? i am asking since when i was working with welding, i was told to keep a sharp point on the end so the flame doesn't start to wander.

@ImAShrimpbruv 27 күн бұрын

I don't weld at all or planning to do it any time in the future, but at 2 am youtube showed me this so I have to finish it as a task.

@mikelenz1990 27 күн бұрын

Very true I find that the welding statement you’re making in this video can also be applied to steam glass projects too much or too little can affect the quality of the project

@AnthonyDeMeo 27 күн бұрын

as a construction Super i can say for sure ive never seen a weld this clean in my life in the field

@dbio305 24 күн бұрын

As a former construction welder it's because nobody gives a shit

@AnthonyDeMeo 22 күн бұрын

@@dbio305 facts

@carstenbjlesen9984 22 күн бұрын

Nice to see som real work 👍

@infamousftfw 24 күн бұрын

Hey! You're Canadian! Mastercraft sander gave it away 😂 I'm an Alberta boy my self 🤙 I'm not a welder, but I have an appreciation for the art

@lamania32 9 күн бұрын

Awesome video! The weld-gap factor is missing V grove versus bevel could be explained further. Either-way max stars! In the past years I had minimum 30 guys "certified welders" in and out of my shop none of them was "qualified". Don't have to say none of 'm works here anymore. So all those: "I know how to weld" watch this videos and please learn more

@RodneySizemore-uf4yu 25 күн бұрын

Awesome thanks, new sub!!!

@dr4gonstear 19 күн бұрын

I recently got a neurostimulator, which prohibits the use of welders specifically. But for some reason I now know how to weld.

@ol-man-duffyj688 Ай бұрын

Dusty what shade lenses do you cover the camera with? I tried your cam hack but have a shade 10 & 12 that’s still to washed out for the iPhone videos

@mikeford963 Ай бұрын

Likely uses a similar shade to what his lid uses for the amerage he's welding at.

@paulmartin7737 29 күн бұрын

My welding is dodgy at best, but I know skill when I see it. Good tips about bevelling and finishing the job to a high standard

@therandomguy1966 28 күн бұрын

Those welds got met excited 😏

@nathanlee6011 25 күн бұрын

Nice to see I’m not the only welder who knows what he’s doing.

@castawaysmc 5 күн бұрын

I saw those videos and was thinking the same thing. just cramming those joints together then grinding the weld back off was just crazy lame

@tridentpower6954 23 күн бұрын

The tiny Xenomorph in the back is awesome

@scottouimet2865 28 күн бұрын

What's the cheapest tig welder one could get without loosing alot of performance

@TheDrizzNizzle 25 күн бұрын

I am in no way shape or form, a welder. But, I have been lucky enough to be present to watch some insane welding up close. I have watched some very skilled people weld together 3 inch thick steel plates together to make roughly 80,000 lb massive bulkheads that seal up reactors for submarines. And let me tell you, the insane amount of bevel they make before the 42ft long welds (plus or minus depending on boat class) is mind boggling. So... Much.... Weld.... Awesome vid!!