Paint peeling off radiators

Рет қаралды 76,474

7 жыл бұрын

Paint peeling off radiators.
Electrodoodle by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер: 48

@CB-xk1ol 4 жыл бұрын

Thank you. Good tips & technique. Will persevere with job I wish I hadn’t started!

@PaintingandDecorating 4 жыл бұрын

Thanks, good luck.

@gbrown744 2 жыл бұрын

And I'm just about to start a job that I would rather not. Not looking forward to it.

@CB-xk1ol 2 жыл бұрын

@@gbrown744 Got there in the end. It was worth it.

@gavinwaterman5456 2 жыл бұрын

Your process works beautifully, I started doing one Straight after the video

@PaintingandDecorating 2 жыл бұрын

Thank you.

@pcno2832 5 жыл бұрын

Good job, but I'd rather spend the time building a cover for that thing. Most of the newer radiators here in the USA are just flimsy fin tubes that need covers to protect them. The covers are usually fairly ugly metal things, but you can always build them from some kind combination of wood, tile, or a nicer looking metal grate. With covers, they are a little easier to keep clean, safer, and because the covers don't heat up as much, they hold paint or varnish better.

@254JROCK 5 жыл бұрын

You are the best person on ut. For this job real work no bs

@PaintingandDecorating 5 жыл бұрын

Thanks.

@nihilisticnut9916 4 жыл бұрын

I bought a sanding attachment for the drill. Basically it was 50 or so small pieces of sandpaper in a circle, once these were spinning the paint came straight off. £3.50

@PaintingandDecorating 4 жыл бұрын

They do work but can be dangerous.

@qulsoomrazaque4921 4 жыл бұрын

Where from?

@nihilisticnut9916 4 жыл бұрын

@@qulsoomrazaque4921 You can buy one from any DIY place, there's a few different kinds to choose from, wire or sandpaper etc. I bought my attachment from Wilkos.

@Gollammeister Жыл бұрын

So you sanded the affected areas to remove chips etc

@PaintingandDecorating Жыл бұрын

Yes then sand the whole radiator to make a good key for the paint... Light sand in-between coats.. thanks

@HRH23 6 жыл бұрын

Wish my radiator was this easy. I've had to use a paint stripper but it's left a lot of sticky residue I'm now stuck trying to get off. Many layers of paint don't help either

@PaintingandDecorating 6 жыл бұрын

Not nice hope you get the finish you're after. White Spirit may help to get the sticky residue off.

@HRH23 6 жыл бұрын

Painting and Decorating thanks. Might try removing the radiator to get a better angle on it then give it another go. Will give white spirit a go

@charlesarnold4963 6 жыл бұрын

I’m just in the process of repainting a radiator and I found you video very useful. The front of the radiator is flat, the fins are on the back. The old paint had flaked very badly. I removed the flakey stuff using a scraper and sandpaper. However there are now hairline cracks all over the place, without loose paint next to them. How do I deal with these hairline cracks please?

@PaintingandDecorating 6 жыл бұрын

Charles Arnold you will have to sand them down best you can or strip the whole radiator.

@charlesarnold4963 6 жыл бұрын

Painting and Decorating many thanks for your extremely rapid reply. Stripping the radiator at this time of year when the weather is so cold is not really an option so I will sand and paint and sand and paint and see what happens!

@PaintingandDecorating 6 жыл бұрын

You can fill the cracks.

@charlesarnold4963 6 жыл бұрын

Painting and Decorating what product would you suggest please?

@PaintingandDecorating 6 жыл бұрын

Something that can be lightly sanded 2 part wood filler would work, use a metal primer on bare metal first

@TheOgi22 3 жыл бұрын

00:00 - do you have licence for use this sound?

@PaintingandDecorating 3 жыл бұрын

Music off KZfaq studio

@RachaelLines 7 жыл бұрын

This is really useful, thank you.

@PaintingandDecorating 7 жыл бұрын

Thanks.

@orbitalforest 7 жыл бұрын

Radiators are a pain in the arse to prep when they're like this.

@doraanyamesem305 7 жыл бұрын

Thank you this was really helpful thank you

@PaintingandDecorating 7 жыл бұрын

Your welcome.

@BHP15 7 жыл бұрын

why you do not use a metal hard brush with a drill to remove the all paint in much shorter time and hassle free?!

@PaintingandDecorating 7 жыл бұрын

You can but it's extra tools and safety you have to wear eye protection.

@PaintingandDecorating 7 жыл бұрын

This is just a cheap easy noise free way.

@AndyCols 6 жыл бұрын

BG 7

@STONEDSOLDIER88 5 жыл бұрын

Thank you BG!

@chrissy212e 4 жыл бұрын

Great informative video. Gosh it's a lot of work I might just use paint stripper and remove,prime then paint....I have 6 radiators to do various sizes.

@PaintingandDecorating 4 жыл бұрын

Thanks, paint stripper will be good, but it all depends on how much is damaged.

@chrissy212e 4 жыл бұрын

@@PaintingandDecorating Thank u for your reply I did it your way in the end not much heavy flaking mostly rust which I removed. I used Dulux Once paint in the end very runny but great finish the radiators look new. Keep up the good videos they are very helpful for novice d.i.yers like myself ☺

@ka5269 2 жыл бұрын

could be lead in some of the paint layers. may not be best to sand

@danielsdecorating3937 6 жыл бұрын

I had a customer recently moaning about how long it takes too sand down prep and gloss a radiator. Frustrating to say the least

@PaintingandDecorating 6 жыл бұрын

Yes can believe it, I think people like to have a decorator in, but they want you out because they don't like the upset. Some rooms are worse than others. Rooms that never get used much you seem to be left alone. But if it's a room that is used frequently they want you finished yesterday. Which is understandable really.

@essanjay8604 6 жыл бұрын

Can't you just tell them how long it will take (overestimated) from the get go then they have no room to complain.

@chrisauten2039 4 жыл бұрын

ASMR anyone?

@paulfoulds3675 2 жыл бұрын

My question is “ is it worth time and effort, particularly as you don’t know what the condition of the radiator is internally. Could well be rusted to hell if an inhibitor has not been present!!

@brucedickinson12 11 ай бұрын

Easier to buy a new one