Paint-tech 29 - Heat Stains / Scorched Metal for Gun Barrels, Exhaust Pipes, Flamers, Thrusters

Рет қаралды 33,068

4 жыл бұрын

In this video I show my method for painting heat stains onto scorched metal surfaces. A useful technique for adding visual interest to large gun barrels, flamers or flamethrowers, motorcycle exhaust pipes, jet thrusters, etc.
Support me on Patreon! / heroesbosses
Paints Used:
Army Painter: Shining Silver
Games Workshop: Nuln Oil Gloss, Seraphim Sepia, Druchii Violet, Drakenhoff Nightshade

Пікірлер: 71

@garethsteel2893 Жыл бұрын

Great vid. Watched this and got 100% results on my first attempt 😀

@HeroesBosses Жыл бұрын

Right on!!

@haveguitar Жыл бұрын

Subscribed, thanks for the lesson!

@HeroesBosses Жыл бұрын

Glad you liked it!

@yannickdevost904 11 ай бұрын

You, Sir, Are a Hero

@HeroesBosses 11 ай бұрын

haha :) thank you

@pakman184 3 жыл бұрын

This has to be the best looking, and likely simplest, way to do muzzle burn I've seen so far. Thanks!

@HeroesBosses 3 жыл бұрын

Glad you liked it :)

@TripleBarrel06 Жыл бұрын

A tip for anyone who wants it: If you want to really elevate this effect, you can use black paint on a fine detail brush around the "burnt" area to dot in little pieces of soot and char. If you want to get really crazy you can use dry black pigment (like you'd use for dust effects) for this effect too.

@nathanmoss8481 Жыл бұрын

absolutley one of the most straight to the point tutorials, thanks for such a simple video!

@Raynsideways 2 жыл бұрын

Always love finding a nice, simple tutorial with a handful of ingredients and a great result, that also uses paints I've already got on hand. Makes it feel like I'm adding a new tool to my toolkit rather than needing to buy a specific paint or figure out a substitute. I've got all three of those washes so I can use this immediately, and I definitely plan to.

@quizongilad 3 жыл бұрын

just what I needed, thank you!

@whytho5666 Жыл бұрын

2023. this is perfect, i have the tamiya weather master D , was gonna touch up some thrusters. tnx for the vid. just wanted to see the sequence of colors.

@HeroesBosses Жыл бұрын

Glad it helped!

@mrgreenbudz37 2 жыл бұрын

You make this look so easy and I know it's not. Haven't built a model is almost 50 yrs and feel a desire to start building them again. I need my happy place, lol

@HeroesBosses 2 жыл бұрын

Haha - well i really feel that this "is" easy, since you're just dabbing a wash on, and you don't have to be accurate with it. Give it a try!

@mrgreenbudz37 2 жыл бұрын

@@HeroesBosses I will be. I am looking for a good model of the Icarus from the original Planet Of The Apes 1968. I see a few out there that seem to have the wrong back section. I know Wilco Models made a really good one and has closed down years ago I found out. Any tips?

@HeroesBosses 2 жыл бұрын

@@mrgreenbudz37 ohh very cool! Unfortunately I have no idea where to find something like that. 3D print maybe?

@mrgreenbudz37 2 жыл бұрын

@@HeroesBosses Not sure. I am so far out of the loop on all this stuff. Remember I am 60 yrs old and haven't touched a model since I was about 15-16 yrs old. I am feeling inspired again and in need of a hobby and after watching the original Planet Of The Apes I loved that ship as a kid and still think it just looks cool. I want to find one if possible to build and use some of your techniques on the nosecone and engines.

@ceegronlee Жыл бұрын

thank you! best tutorial for this on youtube, imo!~

@donaldkhogan 3 жыл бұрын

Thank you for making this so simple and concise!

@HeroesBosses 3 жыл бұрын

I'm glad you liked it :)

@MrMagicchrisi 4 жыл бұрын

Great technique - I love the result!

@HeroesBosses 4 жыл бұрын

Thanks Christian! It's pretty easy to do, and I think it looks pretty cool :)

@chuck-n-debtaylor7553 4 жыл бұрын

Great looking effect!

@HeroesBosses 4 жыл бұрын

Thank you! Cheers!

@redshirtmodels5757 4 жыл бұрын

Great video. I have been trying to figure out how to do this effect for ever, thanks.

@HeroesBosses 4 жыл бұрын

I'm glad it helped!

@monsterclown4455 3 жыл бұрын

I was just looking this for my armiger and imperial knights. I'll try this out for sure

@MrTrenttness 3 жыл бұрын

Beautiful! 🔥🎸🔥

@HeroesBosses 3 жыл бұрын

Thank you!

@cantondaniel 4 жыл бұрын

Amazing, thanks! Will try it on the Blackstone Fortress traitor guard with the flamer 💪🏽

@HeroesBosses 4 жыл бұрын

Yeah - that would look great :)

@therealindeimaus 3 жыл бұрын

this is incredible thank you

@bremer1701 2 жыл бұрын

very helpful video. i will use this next time i paint a flamethrower

@HeroesBosses 2 жыл бұрын

Thanks! Glad you liked it!

@LandofMert76 4 жыл бұрын

Tried to figure out how to do this years ago when I still had my Ogre Kingdoms Leadbelchers. Thanks for the video

@HeroesBosses 4 жыл бұрын

Yeah it took me a while to figure out the best way to do this without an airbrush - but this method works really well, IMO.

@dljtwo 3 жыл бұрын

This is amazing 👏

@HeroesBosses 3 жыл бұрын

Thank you!

@nucollector5597 3 жыл бұрын

Thanks for this great video gonna try and use these tips 🤙🏽

@KurtKn1sp3l 4 жыл бұрын

A short video for a great result.

@HeroesBosses 4 жыл бұрын

Thank you very much!

@KurtKn1sp3l 4 жыл бұрын

@@HeroesBosses We are the ones that have to thank you for this kind of videos.

@Miyagi-e3t Жыл бұрын

Any recommendations for black soot stains? Great vid!

@HeroesBosses Жыл бұрын

Use any black paint and a soft brush - like a cheap makeup brush. Get a little paint on the brush, dab most of it off on paper towel then lightly dab it on the end of the barrel.

@user-nx2dt4wj8r 4 жыл бұрын

nice

@HeroesBosses 4 жыл бұрын

Thank you!

@valdezagv 4 жыл бұрын

its that easy? instant sub

@HeroesBosses 4 жыл бұрын

Right on! :)

@Windhox_cz 2 жыл бұрын

Hello there kind sir. I am pretty new to the 40k hobby (I have only painted 5 marines and a captain so far) and I would like to add this effect to some exhausts on my future models but I don't own the proper washes or brush to do so. Do you think that I could achieve similar effect with regular paint with more water added than usual? (I read somebody in the comments tried it but I don't know if "watered down" means added water or more specialized thinning medium since I could imagine that if you overdo it with the water you could get substance which no longer sticks to the surface) If so what ratio would you recommend? Also I don't own any brushes with particularly soft bristles. Would it be possible to use regular brush? These are all things I could try first but I feel like asking someone more experienced is better than trial and error since that can be costly sometimes. In any case this was an excellent video! Quick, well structured, shot and voiced and it was to the point. Thank you for your work!

@HeroesBosses 2 жыл бұрын

Hey there - glad you like the video :) You can use paints rather than washes (I've never done it, but I don't see why it wouldn't work) - I'd probably water them down with normal water 4:1 water:paint - and they will stick - you just need to give it time to dry between layers. And make sure you're only using a very small amount of paint at a time - the brush should be mostly dry. You can do with with a regular brush - I add dirt spatter all the time this way by dabbing on tiny amounts of watered down paint onto the feet and clothes of models. If you WANT a soft bristle brush, makeup brushings from a dollarstore or something similar is the way to go. I hope this helps!

@Windhox_cz 2 жыл бұрын

@@HeroesBosses Thank you very much for quick and clear answer! One thing I very much like about the 40k community (or scale modeling in general) is how kind and helpful everyone is. And you are a prime example of that!

@HeroesBosses 2 жыл бұрын

@@Windhox_cz I love that about the community too :)