I have always just used a gloss on them, never had a problem (apart from a bit of a smell for a few days). Nice to hear no radio!!!
@PaintingandDecorating7 жыл бұрын
Ye that's also ok although they sometimes can go green looking over time. The primer just helps this not to happen.
@pgrg63493 жыл бұрын
Hi. Can the metal paint be okay for the copper pipes heating?
@francesca391910 ай бұрын
Can you paint emulsion on top of this primer? Want to paint pipes same colour as my walls. Was also thing of spray painting them to save time. What spray primer would you recommend?
@geoffsmith6735 ай бұрын
What did you paint over the primer with?
@seantully35217 жыл бұрын
Great to see you back mate! can you get that primer in B&Q
@PaintingandDecorating7 жыл бұрын
Thanks and yes you can get the primer from B&Q. Dulux oil undercoat and Dulux oil gloss.
@seantully35217 жыл бұрын
Thanks, mate look forward to more videos
@cherylbeauty09693 жыл бұрын
Great video thanks
@PaintingandDecorating3 жыл бұрын
Thank you
@EggsForDessert6 жыл бұрын
Once primed can I paint pipes with the same Matt paint I used on the walls? My pipes run under the rads across the wall and I’m debating whether to make them white or the colour of the walls.
@PaintingandDecorating6 жыл бұрын
Listless Donkey yes you can paint them with your wall paint.
@EggsForDessert6 жыл бұрын
Painting and Decorating In your experience what colours should rads/pipes be? White gloss/satinwood or same as the walls.
@krisja63015 жыл бұрын
@@EggsForDessert I know this is an older comment but what did you decide to do in the end?. I'm in exactly the same situation. I have pipes running just above the skirting boards along the walls and I'm undecided whether to paint them white or magnolia like my walls
@spinx12005 жыл бұрын
krisja white is more striking as opposed to magnolia, and gives a better Contrast against the magnolia. Only my opinion though. Magnolia pipes look as if they’ve “yellowed “ with heat 👍👍
@mrconcept4 жыл бұрын
HI, for old pipes that are already painted would you just sand and then repaint or would i need to strip as much of the paint off before hand down to the copper? Problem is there are quite a few chips so just worried about an uneven finish. Great channel btw, learnt alot from your videos.
@PaintingandDecorating4 жыл бұрын
Thank you, yes sand and repaint, but in the areas where it's chipped make sure you sand them even. Touch up any bare copper with primer.
@Gollammeister5 жыл бұрын
I'm painting silk on my pipes as they already have old paint on them and I want to hide them unfortunately I need small flat brushes as hardly any room beneath and at side for paintbrush and nice video good advice on sanding I noticed tho you just dust off after sanding vs damp cloth to ensure as complete as possible removal of dust particles etc nice video all same
@PaintingandDecorating5 жыл бұрын
Thanks, a dust of is usually enough... sounds like you need a lining fitch or pencil brush.
@georgecclifford82352 жыл бұрын
They are better primed, I use a couple of coats of Zinsser bin no difference really it just dries quicker
@geoffsmith6735 ай бұрын
Used BIN and it oxidised the copper.
@leonskum.56826 жыл бұрын
Good video. I'm having a wild guess that it was in Stockport.?
@PaintingandDecorating6 жыл бұрын
Close
@peteramond33587 жыл бұрын
Good information bud and I missed the music from the radio
@PaintingandDecorating7 жыл бұрын
Thanks. The will be no more radio and filming unfortunately did a video the other day. And when I uploaded it the was one song band world wide. So I thought best not do that again. Good video as well may still put it on. Will take the sound off should be fun guessing what am saying. LOl
@beady00812 жыл бұрын
Will wood primer work? I've only got a small pipe to paint and don't want to buy a whole tin if I can get away without it
@PaintingandDecorating2 жыл бұрын
It's better than nothing.. oil wood primer can fell sticky till it's undercoated using oil prefably. but if your going over with water based you will have to leave it to dry for a free days...
@beady00812 жыл бұрын
@@PaintingandDecorating thanks mate
@AnumSkittles Жыл бұрын
Hi, I bought a paint that is suitable for wood and metal. Used it on my copper pipes and within 20 minutes, the pipes turned blue-ish/ green. Should I wipe down the paint to remove it or is that normal/ requires a second coat tomorrow? Many thanks for your response.
@PaintingandDecorating Жыл бұрын
Lots of paints say they can go on wood and metal.. but bare wood and metal require primers.. unless it says on your paint no primer required.. thanks
@AnumSkittles Жыл бұрын
@@PaintingandDecorating Thank you for responding. Ah, hmm so is it bad that the pipes have turned a greenish blue colour coming through thr white paint? What should I do next? Remove the paint from the pipes (I have something that can do this) or should I paint over it with a second coat of the white paint? Kind regards
@MrGoldfuzion4 жыл бұрын
Can’t BIN be used on pipes first?
@PaintingandDecorating4 жыл бұрын
Yes, B.I.N. also works on copper.
@geoffsmith6735 ай бұрын
I put BIN on and the pipes turned green.
@BillyF2LJeffs5 ай бұрын
Not one video on KZfaq about how to paint the wall/skirting BEHIND the pipes 😩
@PaintingandDecorating5 ай бұрын
Small brush and wipe off any paint you get on the pipe. Easy, wall first allowed to dry then pipes.