Painting Interior Panels Part 1 (Nissan 350Z)

Painting Interior Panels Part 1 (Nissan 350Z) | AnthonyJ350

Рет қаралды 1,002,414

Күн бұрын

Ah the dreaded Nissan 350Z interior panels where all the paint scratches off. I don't know why Nissan decided to poorly paint these little trim bits in these interiors, but they did. And it's up to us to restore them so it doesn't look so embarrassing at the next car meet.
In this video I go over an easy and durable way I like to paint interior panels. The key is to use "high build" filler primer and truck bed liner or texture paint if you chose. I like the truck bed line because it's decided to be chemical resistant and be put through very harsh environments. So if you use it in the interior it's going to last a long time.
#SprayPaint #InteriorPanel #Painting
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Painting Interior Panels Part 1 (Nissan 350Z) | AnthonyJ753
• Painting Interior Pane...
ANTHONYJ350
/ anthonyj350
Painting with Bedliner: (0:00)
Disassembly: (0:58)
Surface Prep: (3:55)
Painting: (5:43)
Conclusion: (9:24)

Пікірлер: 391

@AnthonyJ350 7 жыл бұрын

If you prefer to use traditional interior paint, watch Part 2 kzfaq.info/get/bejne/pLJxbNaErdbNY3k.html

@user-in9ec3uk6k 7 жыл бұрын

AnthonyJ350 ηηωβξξξξκκκμηγγδσ σε να φάω να γουστάρω θέλω να φάω να γουστάρω θέλω να φάω να γουστάρω να φάω να γουστάρω τότε

@dead_p1xl964 8 жыл бұрын

That looks pretty bad. I think the truck bed liner spray was a mistake on this one.

@AnthonyJ350 8 жыл бұрын

Watch part 2 and also watch the lastest video on my Facebook page so you can see what it looks like against the whole door. I have to tell all the neigh sayers this....

@hedonista91 7 жыл бұрын

If anyone is interested in spray painting the greatest success that i've had was by following the Magic Painter Method (i found it on google) definately the best info i've followed.

@thousandnairepusha3288 7 жыл бұрын

How do u take off the interior door handle barrels ?

@Imbeastnot582 7 жыл бұрын

idk what tf happened with mine but i took off cap from passenger door handle i got top off but buttom was stripped or something it turns but wont come out i managed to get it more loose any ideas how to remove?

@Mr0abdul 7 жыл бұрын

Do you have we can use instead off the rubbing alcohol

@tonycervantes4816 7 жыл бұрын

What sand paper u use .bro

@imihussain1781 7 жыл бұрын

excellent tutorial man great work

@jamespatton3720 7 жыл бұрын

That's amazing!!!

@notallthatbad 6 жыл бұрын

Looking at all the hate comments here. Are you folks blind in one eye or something? He did a decent job and it restored the interior nicely. Scratches are gone, replaced with a grain type texture. Maybe that's why people are bitching, but more prone to believe it's people looking for something to be unhappy about.

@AnthonyJ350 6 жыл бұрын

Ya I'm not sure either. Maybe they thought it was suppose to be smooth after? I just wanted to show an alternative to traditional paint, because most factory painted panels turn out like this over time. People seem to be half and half on this one.

@notallthatbad 6 жыл бұрын

Well, I'm of the half that believes it looks just fine. Ignore the rudeness.

@stillon360 3 жыл бұрын

I've got some glossy gray bezels just like yours that have paint coming off with the white showing underneath. I was wondering what grit you started with when sanding?, Im considering using rustoleum 2X paint/primer and finishing with their crystal clear enamel. Thanks!

@AnthonyJ350 3 жыл бұрын

You can start with 200 grit and work your way up to make it smooth again.

@abhayajoodha3113 7 жыл бұрын

You should do several thin coats of a lighter silver metallic paint (after a primer of a preferable light color ; white or grey) followed by a matte clear coat. Lightly sand with 1000+ grit sand paper ( to your desired finish ) giving the panel a brushed aluminum finish.......in my opinion it would contrast better with the interior.

@portiajanes2064 6 жыл бұрын

The panels in my 350Z have been redone matte black and it looks really good. The dash hasn’t been done and there’s some minor scratching so I think will do that next.. just a bit of work for a few scratches 😂

@AnthonyJ350 Жыл бұрын

Thanks for sharing!

@MarkSmith-ey2pg 8 жыл бұрын

Awesome! Great info! Thank you!

@jeffyoung4078 8 жыл бұрын

Great video. I just inherited a 350 and this was driving me nuts!

@AnthonyJ350 8 жыл бұрын

+jeff young Glad it helped! Lots more 350Z videos to come.

@chriscasas8593 8 жыл бұрын

Have you also touched up the door handle/AC vent area as well? They are just as bad as these panels but I've never tried removing them

@AnthonyJ350 8 жыл бұрын

+Chris Casas You have to remove the whole door skin to get at the screws behind. I have a speaker install video where I show you how to remove the skins. I just touch mine up with a sharpie cause the damaged areas are so small lol.

@stevenpruitt4763 7 жыл бұрын

Dang..With all the hate, i was expecting it to be horrible. It looks better than it did and he clearly stated that this was a option he chose as there are many if you dont like the look. People get on youtube and talk crap cause their life sucks.

@AnthonyJ350 7 жыл бұрын

Steven Pruitt A lot of people don't like an idea if it's not conventional. And yes I wanted to show people something a little different and it's much easier to paint with this stuff.

@derbigpr500 6 жыл бұрын

No, it's simply a bad result because not only did he use the wrong type of paint, he used the wrong technique for both the paint and the clear. Just because you don't understand how something should be done and therefore don't realize what's with all the "hate", doesn't mean that people aren't giving proper criticism and not actually hating.

@crocodile2006 5 жыл бұрын

@Jay Dee I don't think the hate is warranted... BUT... I reckon the biggest mistake he made ignoring the paint choices was he didn't take all the black rubberdised paint off. The black rubber paint has really terrible adhesion because the grey plastic underneith is shiny. He should have scraped the paint off, light sanded the grey plastic then painted with interior paint. That's what I did and it came out perfect.

@Slamdoxicalz 7 жыл бұрын

I liked the primer look :D

@xaviergarces3125 3 жыл бұрын

It looks really bad when reinstalled.

@AnthonyJ350 Жыл бұрын

Thanks for watching!

@BrayanDiaz-nm1bb 3 жыл бұрын

What grit sandpaper did you use

@AnthonyJ350 3 жыл бұрын

You can use 220 before primer.

@fethi27ify 8 жыл бұрын

Would it be safe to use acetone to remove the black paint?

@AnthonyJ350 8 жыл бұрын

I don't see why not. I use acetone to clean a lot of plastics.

@richardcabral9863 3 жыл бұрын

Anthony, where did you get that tool to remove the panels/guards, and what is it called. I realize I could use a butter knife but I am a tool junkie and love to get that tool. Your tutorial on replacing the coils really helped. Thanks. Richard

@AnthonyJ350 3 жыл бұрын

You definitely need to check out 12vtools.com/

@Jeffmena1208 3 жыл бұрын

Can you get this wax or get regular carwash after painting it ? Does it stay the same or it gets messed up ?

@AnthonyJ350 3 жыл бұрын

Honestly my car looks the same up to today. I just clean it with a clean wet rag. It's bedliner so it's tough.

@sansui1968 6 жыл бұрын

i use that bed liner rustolume the ordinal formula[[[cheaper of the two by about 2 bucks.usd.] not the 2nd formula heavy duty stuff as texture is not good ...great job

@des4183 7 жыл бұрын

what is that tool you used to remove the panels

@AnthonyJ350 7 жыл бұрын

Check out 12vtools.com

@Ceez350 5 жыл бұрын

can you show me how to remove the plastic circlen around the airvents on the doors and the small plastic behind the door handle from the inside of the door it has the same scratches

@AnthonyJ350 3 жыл бұрын

I'll try to make a video when we're in the new home shop

@Bmwguy2011 6 жыл бұрын

Incredibly knowledgeable. Wow! I wish you were here to fix my bmw door grips (as part of the door panel). The dealer wants $578 for the door panel; this I’ll have to try to paint it.

@AnthonyJ350 6 жыл бұрын

Jonathan Reed Make sure you clean and prep it well to help it stick. You can see my older videos and they have held up well since I made this video. It's not for everyone but works for me.

@colelanter7323 6 жыл бұрын

Idk why everyone is hating on this. It’s a great idea and it clearly restores the panels. Amazing and thanks

@AnthonyJ350 6 жыл бұрын

Thanks, I'm not sure either because I have filmed the doors for other videos and no one says anything.

@Oiii615 4 жыл бұрын

Good work. I will work on mine. What is the specialised prying tool called? I need to buy one. Help.

@AnthonyJ350 4 жыл бұрын

You can find the tool here 12vtools.com/

@polarbear1888 5 жыл бұрын

As far as touching it up goes, is it easy to sand away truck bed liner?

@AnthonyJ350 5 жыл бұрын

If there aren't deep scratches because it's textured you can just spray over it again with very light coats.

@dalandser562 7 жыл бұрын

Just use a scotch brite pad or 400+ grit sandpaper to knock down the texture of the truck bed liner spray and then paint again in color of your choice. Use satin or matte clear coat if you don't want it shiny.

@AnthonyJ350 Жыл бұрын

Thanks for the tip!

@hankhankyourhankerin401 8 жыл бұрын

I leave plugs connected to switches in this case,

@jessicawalker8564 3 жыл бұрын

I just got one of these at auction...fantastic solid engine filthy n beat up cosmetically but I am having fun exploring. I was curious what the previous owner did to scratch up those panels...great content

@AnthonyJ350 3 жыл бұрын

Thanks for watching!

@kermitthefrog9315 8 жыл бұрын

an alternative is to use automotive trim black paint...the final sheen will more closely resemble the original look... it is sold at most all auto parts retailers... Duplicolor brand is best

@nagytibor7455 7 жыл бұрын

hello nice tutorial,i am interested how would you solve that if the trim has a special surface like an orange or vinyl leather has?If you clean it with wet sands you will eliminate the surface so it will not look like OEM look anymore

@AnthonyJ350 7 жыл бұрын

Nagy Tibor Which trim are you referring to exactly

@nagytibor7455 7 жыл бұрын

it is under which you painted

@savannahrosedigitalillustr1946 5 жыл бұрын

could you use plastic dye, like they use to customise keyboards?

@AnthonyJ350 5 жыл бұрын

That's an interesting idea, it is plastic. You would have to do a lot more prep and make it perfect, as the product shown here "builds up" to help hide imperfections.

@jodale24 8 жыл бұрын

is this any different through the years?

@AnthonyJ350 8 жыл бұрын

+Mike Rousseau No sure, there are some people commenting they don't have the same issue, but they seem to be in different continents. You can just scroll through the comments.

@jaronnannu822 4 жыл бұрын

That looks pretty good!

@AnthonyJ350 4 жыл бұрын

Thanks!

@robmcguire9756 Жыл бұрын

On my z rhe handles are fine but my dashboard is all marked up any tricks for the dash

@AnthonyJ350 9 ай бұрын

I wouldn't contact an interior repair company. They're usually mobile and do a great job.

@chiphill4856 8 ай бұрын

Clear coat also comes in matte finish. If you don't like shiny.

@AnthonyJ350 8 ай бұрын

Good point, thank you!

@vanessarojas6536 7 жыл бұрын

How would you paint a Hyundai sonatas 2004 interior?

@ukcarspotting9508 7 жыл бұрын

Vanessa Rojas well you take the panel off then follow this video and then fit it

@robertrodrigues3260 5 жыл бұрын

Thanks man!

@AnthonyJ350 4 жыл бұрын

Thanks for watching!

@stringsnare 5 жыл бұрын

I used regular primer, after the primer i still see some minor nicks and minor scratches...maybe i need to putty or more finer grit sanding?

@AnthonyJ350 5 жыл бұрын

You can use a finishing glaze which is finer and easier to use than regular body filler. Try a couple coats of filler primer.

@stringsnare 5 жыл бұрын

@@AnthonyJ350 thanks i will try that. I am also using duplicolor vinyl and trim paint not sure its a good one or not. Im so frustrated this is my third time painting after two resands haha. Gotta start somewhere!

@michaelrodriguez350 5 жыл бұрын

Looks good I would use this technique thank you!

@AnthonyJ350 4 жыл бұрын

Glad you liked it! It's not for everyone, but I find it's really durable.

@xaviergarces3125 3 жыл бұрын

Buy the textured spray paint, it gives it a finer look to it. The bed liner is too course.

@justinmadden6463 8 жыл бұрын

Bed Liner lays down a little thicker perfect for older cars/trucks this help keep the panel from wiggling and feeling loose plus the extra grip graps on to surrounding panels just giving off a better build feel. I love using bed line works great for mirrors and bumpers as well I like to leave to surface more abrasive then when using a normal paint. Bed line likes to peel.

@tanwirkhan78611 Жыл бұрын

Thanks

@AnthonyJ350 Жыл бұрын

You're welcome

@ibelushi 8 жыл бұрын

thanks,the video is very useful

@AnthonyJ350 8 жыл бұрын

+ibelushi Glad it helped :)

@marklundegren 6 жыл бұрын

Thanks for the video, Anthony. As an alternative to sanding the panels bare, how about using paint stripper? It looks like there are plastic-friendly ones, potentially allowing folks to skip heavy sanding...

@marklundegren 6 жыл бұрын

Here's a video on stripping paint from plastic kzfaq.info/get/bejne/rb-nos57y5atZYU.html

@AnthonyJ350 6 жыл бұрын

Ya if you can find a plastic friendly product I don't see an issue. Good find!

@panjustore 8 жыл бұрын

Really nice and clear video mate. I have a question, I used primer (grey) then silver metallic as a basecoat on a plastic then after drying I used clear coat but soon as I sprayed the clear coat the primer (grey) colour appears isn't that weird? What m I doing wrong here ? Appreciate your advice

@AnthonyJ350 8 жыл бұрын

Sounds like the clear is just making your silver look like the primer. Why not just have the base coat and no clear coat? Or try laying the clear on in thinner coats?

@panjustore 8 жыл бұрын

thanks for the reply, the reason m using the clear coat is to make the car interior trims more glossy and plus the base coat is not fully drying waited 2 days and still its bit sticky. m using spray cans

@AnthonyJ350 8 жыл бұрын

panjustore Did you try wet sanding the clear? You might be getting a lot of orange peel making the silver lose its gloss.

@panjustore 8 жыл бұрын

no i have not. i have sanded down the whole plastic. any advice on starting from fresh ?

@panjustore 8 жыл бұрын

+Bryon Payne thanks boss actually I used baby powder after the base coat and that kinda works for me but I have other pieces to be painted I'll defo use your advice on those thanks bud !

@Evak-4allG 8 жыл бұрын

YEA !! PROUD 2 BE ... ... I love that CANIDIAN beaver lol, the real north dodge. keep up the good work J350.

@leo_biker 4 жыл бұрын

Looks good 👍

@AnthonyJ350 4 жыл бұрын

Thanks for watching!

@user-ec6xd2ig4c 3 жыл бұрын

I put on a carbon fiber replacement panel for the door trims and it just goes over these scratched panels. Better than painting it. It looks way awesome. Got the panels from ebay. Up to now, its been 5 years and the panels never scratch up. Still looks new today. Long term protection for the door panels.

@AnthonyJ350 3 жыл бұрын

Thanks for sharing!

@d4v1djh Жыл бұрын

You think you can get a link for me ?

@dr.aviator 4 жыл бұрын

Very nice job man! Quick question, not sure if you answered this or not but where did you get the metal device to remove the panels from the car?

@AnthonyJ350 4 жыл бұрын

Thanks! Got it from 12Vtools.com

@dr.aviator 4 жыл бұрын

Thanks man!

@ThirtyFourProduction 6 жыл бұрын

İdk why you did not finish the paint coat..

@AnthonyJ350 8 ай бұрын

Just seemed like the right thing to do

@Rymden2 7 жыл бұрын

Couldn't you wrap this in Carbon fibre vinyl wrap insted of painting it?

@AnthonyJ350 Жыл бұрын

You could

@racingdreamz8021 Жыл бұрын

Best paint for this job is matte black high temperature engine paint, it is very strong & has a factory finish

@AnthonyJ350 Жыл бұрын

Thanks for the tip!

@platinumjazz_ 4 жыл бұрын

Do you have a list of everything bought and used in this video ?

@AnthonyJ350 4 жыл бұрын

Just sand paper, primer (for plastic) and a bedliner that sprays on thin.

@platinumjazz_ 4 жыл бұрын

AnthonyJ350 Thanks !

@theonlynateindenver 8 жыл бұрын

Curious how this has held up since first posting. Going through the sanding process presently, but curious what to expect in terms of longevity. I'm going with primer, flat black, and matte clear coat. Thanks a ton for posting this video.

@AnthonyJ350 8 жыл бұрын

Looks the same. If you look at my Facebook page there is a video of me testing the system and you can see the whole door how it blends in. My hands can be greasy some times from work and it doesn't affect the finish. It's not for everyone (as you can tell by the comments) but it looks the same over time, which is the point.

@sonnyburnett35 8 жыл бұрын

do you have an ebay or etsy store. people can mail you the parts? and you do it? awsome video

@AnthonyJ350 8 жыл бұрын

+Sonny Burnett Thanks! Unfortunately I'm already slammed at my shop currently and don't have room in my schedule to do this type of work for people. Did you try talking to your local install shop? Also there are companies that do mobile work for repairing repairs. They would be able to paint the panels for a reasonable price.

@vtajoe1 7 жыл бұрын

Use a flat black and finish off with a 2K clear (2 part)... BULLIT PROOF!

@MYSMarek 7 жыл бұрын

why didnt you buy another one amd exchange them??

@AnthonyJ350 7 жыл бұрын

Polak z polski Oh because I'm poor.

@karbonbon69 7 жыл бұрын

what's the name of that lil' gadget u used to pop it out

@AnthonyJ350 7 жыл бұрын

aaron napoles 12vtools panel removal tools. Check out their website

@karbonbon69 7 жыл бұрын

AnthonyJ350 koo thanks,,

@Spherian7 5 жыл бұрын

I got an awesome deal on garaged 2006 Z with 18,000 miles for 18 Gs . The lightweight wife who drove it had a small dog that loved her very, very much. Your video ends the problem her dog left for me to solve. THANKS!!!

@AnthonyJ350 5 жыл бұрын

Thank you!

@Spherian7 5 жыл бұрын

@@AnthonyJ350Same to you, Ace.

@peterjamieson2441 5 жыл бұрын

Good job bro. God bless

@AnthonyJ350 4 жыл бұрын

Thanks for watching!

@drivn4895 7 жыл бұрын

Looks pretty cool. Bet it looks much better in person. Does it feel like a typical smooth clearcoat finish or is it rough the same way that it looks?

@AnthonyJ350 7 жыл бұрын

tigerpaw Ya no-one notices it in person, just looks normal. Kind of rough feeling. Adding clear helps make it feel smoother.

@drivn4895 7 жыл бұрын

I dig it. Nice work!

@AnthonyJ350 7 жыл бұрын

tigerpaw Thanks! Not for everyone as you can see by the comments Lol. I'm a function guy, what can I say.

@drivn4895 7 жыл бұрын

I wanted to know how others were painting their interior trim because I'm looking to do it myself and thankfully you've uploaded this video on how you went about doing yours. Specifically on how far away one should keep the can away when spraying and it seems the general rule of thumb is to do light coats. It's all artwork, and I love all of it. Everyone has their own personal preference. Thank you for sharing your creation :)

@larryrayner3826 7 жыл бұрын

my 2006 fairlady doesn't have that problem,those parts are the same colour as the passenger hand grip on his car.

@Brian1. 5 жыл бұрын

Not bad. May try this on my Zed. The handles are horrible

@AnthonyJ350 4 жыл бұрын

It's alternative to finishing.

@ChannelytelHD 8 жыл бұрын

Looks shity 😏

@AnthonyJ350 8 жыл бұрын

+Affectam Check out the latest video on my Facebook page where I run the system. You can see interior shots and also the whole door.

@jonathankeith524 8 жыл бұрын

Although I probably wouldn't have gone with truck bed liner, I don't believe the final result looks as bad as some people in the comments are saying. At least it looks better than it did before! I enjoyed your video! Thank you for the upload.

@AnthonyJ350 8 жыл бұрын

thanks! I like the stuff mainly because how very forgiving it is when it lays on and it's very resistant to everything.

@jonathankeith524 8 жыл бұрын

AnthonyJ350 That's awesome my man! :) It's good that it's durable, because it will be able to resist years of contact with objects, without chipping.

@AnthonyJ350 8 жыл бұрын

+Jonathan Keith The way I look at it is, this way is like being with a girl that's an 8 till she's 65. or the other way is a girl that's a 10 but when she's 35 she turns into a 6 with age. Get what I'm saying?

@jonathankeith524 8 жыл бұрын

AnthonyJ350 Haha yeah man, I understand! I'm surprised at how easily the stock paint chipped. Went from a 10 to a 4 real quick. I can live with an 8. Especially if she's a good cook. lol

@ThatGaijinFella 7 жыл бұрын

AnthonyJ350 - if you think 35 is old, man you're gonna be sorely disappointed when your girl hits 40 and still looks like an 8!

@physics2817 Жыл бұрын

Get so much from your videos! Thank you

@AnthonyJ350 Жыл бұрын

Thank you for watching them!

@nuclearbum9858 8 жыл бұрын

sand. 3 coats prime sand smooth spray flat black..done

@robertrosal9034 7 жыл бұрын

How about painting the dash cover speedometer?

@AnthonyJ350 7 жыл бұрын

This video should help you out. kzfaq.info/get/bejne/pLJxbNaErdbNY3k.html

@AnthonyJ350 7 жыл бұрын

And here's how to take it apart. kzfaq.info/get/bejne/jbukeNuGs8q7eYU.html

@Patrick-xp6vs 7 жыл бұрын

try foliatech from Germany this stuff ist amazing (Interieur spary)

@AnthonyJ350 Жыл бұрын

Thanks for sharing!

@Ihaveadashcam 7 жыл бұрын

Change with carbon fiber one

@eTraxx 2 жыл бұрын

You can get clear coat in gloss, semi-gloss and matt

@AnthonyJ350 2 жыл бұрын

Thanks for the comment!

@4bankzz 3 жыл бұрын

Can you use a hair dryer instead of a heat gun

@AnthonyJ350 3 жыл бұрын

You could

@AtomicShadow64 8 жыл бұрын

I have a 2007 350 and my pannles and not like that at all. They are made from black plastic and they look perfect. I guess the 2007 and 2008 got aome interior upgrades as well.

@AnthonyJ350 8 жыл бұрын

+AtomicShadow64 Hmmmm I might look into ordering some from that generation if they're the same shape.

@AtomicShadow64 8 жыл бұрын

Mine look the same as yours in the video. Same buttons in the same location. I cant imagine that part being different between years. It would be a waste of money for Nissan. Maybe just buy a driver side one and try to install it. See if it works.

@fxgamer-11yt 5 жыл бұрын

You could also vinyl it or carbon figre it with a vacume bag mold

@AnthonyJ350 5 жыл бұрын

That's an interesting suggestion. It might have a hard time contouring to the sharp contours of the window switches wouldn't it?

@fxgamer-11yt 5 жыл бұрын

You have to heat it and strech it look into some tutorials

@phoenixbaker1224 5 жыл бұрын

It looks better in person

@AnthonyJ350 5 жыл бұрын

I know, tell that to the neighsayers lol

@MonsterRacing2 8 жыл бұрын

Brake paint or a nice gloss finish

@psuedozardozz 5 жыл бұрын

That works on plastic?

@E92Danny 8 жыл бұрын

Im wrapping mine

@AnthonyJ350 4 жыл бұрын

Nice

@sneakerhead2386 8 жыл бұрын

I have it on my 2007 g35

@jdub2878 4 жыл бұрын

How do you like that car?

@mmnissanzroadster9 8 жыл бұрын

What would be the cons of just using plastidip?

@AnthonyJ350 8 жыл бұрын

+Marcus_Mravik May peel off easier since that a part on the door you always touch. I would recommend a vinyl wrap if you're going that route.

@edgervillanueva9673 8 жыл бұрын

+AnthonyJ350 why disconnect the switches make life easy undo the clips and not disconnect the windows switches.-_-

@edgervillanueva9673 8 жыл бұрын

+AnthonyJ350 why disconnect the switches make life easy undo the clips and not disconnect the windows switches.-_-

@AnthonyJ350 8 жыл бұрын

Because you don't want to paint the switches.

@TurudesRavenholt 8 жыл бұрын

+AnthonyJ350 He means why not leave the switches plugged in but disconnect them from the panel.

@dsmjaime 6 жыл бұрын

350 ZED

@matthewedwards5872 4 жыл бұрын

hi, matte clear coat is a thing!

@AnthonyJ350 4 жыл бұрын

Good to know!

@MrRangerZr1 8 жыл бұрын

You like that finish?

@AnthonyJ350 8 жыл бұрын

+MrRangerZr1 It's quick, durable and easy to repair. Watch the latest video on my Facebook page and you can see these panels in the interior with the rest of my install.

@MrRangerZr1 8 жыл бұрын

+AnthonyJ350 Yeah it blends in. I need a guy like you in florida lol

@AnthonyJ350 8 жыл бұрын

MrRangerZr1 Well the funny thing is, everyone that doesn't like it, doesn't look at the door and the interior as a whole. I'm not trying to be cocky, but everyone that gives this look flak probably doesn't have a car as nice as this. I put this car together in my spare time in 8 months. Some times you just need to try different things. You saw how bad those panels were, that would have needed a ton of sanding with high build primer, just to get started.

@MrRangerZr1 8 жыл бұрын

AnthonyJ350 Yeah I loved the build. Nicely done 350z. Enjoy that VQ engine.

@lanesteele240 6 жыл бұрын

This is the only thing that i hate about my z now that i shaved the antenna and rear wiper motor

@AnthonyJ350 4 жыл бұрын

It's a little annoying.

@Mokujo 5 жыл бұрын

I cant get the damn white connectors unplugged. It is really stuck in there.

@AnthonyJ350 5 жыл бұрын

You have to use a small flathead screw driver to push in the tab. Nissan plugs are brutal.

@Mokujo 5 жыл бұрын

@@AnthonyJ350 Ah, so you literally have to *push* it in there forward? I was just getting it under it and leveraging it up. That'd explain it, lmao. I've only ever worked on Toyota sedans, and never did anything electrical on those, so I'm fucking stupid rn when it comes to Nissan sports cars, sorry.

@jasondominguez8434 Жыл бұрын

I used flat black engine enamel, looks like they are factory

@AnthonyJ350 Жыл бұрын

Thanks for sharing!

@brandon2161 7 жыл бұрын

Y bed liner

@AnthonyJ350 7 жыл бұрын

brandon Covers imperfections, easy for a novice to spray, very durable when your hands handle it everyday.

@fatjaysgarage Жыл бұрын

There are aftermarket options

@AnthonyJ350 Жыл бұрын

Yes there are.

@andriuskaraliunas6259 2 жыл бұрын

I found out that plastics are not made from silver color. The silver color is primer. You can peel it off and you will see that plastic is black. So, black blastic, silver primer, and then black paint.

@AnthonyJ350 2 жыл бұрын

Thanks for sharing!

@Juandicimo23 8 жыл бұрын

350 ZED ?

@AnthonyJ350 8 жыл бұрын

+juandicimo_ 23 I'm Canadian that's how we pronouce things. I don't ask questions when Americans say "ruf" instead of "roof" but they can say "tool, fool, cool and school" properly.

@Juandicimo23 8 жыл бұрын

+AnthonyJ350 I don't know anyone that says "ruf" 😂 lol But oh okay.

@AnthonyJ350 8 жыл бұрын

juandicimo_ 23 Watch "Home Improvement" Tim Allen totally says it a bunch of times. That's where I'm grabbing my stereotype.

@TJ_Auto 8 жыл бұрын

could have had a nice finish but you just dusted the clear you need to apply clear heavier than regular paint to get a nice finish then after you can wet sand and buff it to get it perfect =D

@AnthonyJ350 8 жыл бұрын

Do you want a super perfect finish on something you grab at all the time though? Remember people wear rights and stuff some times. Ever look at painted cars from factory like the PT Cruiser and Beetle for example?

@TJ_Auto 8 жыл бұрын

Keep it clean and your good I like keeping my car clean and a nice glossy glass like finish is just gorgeous!

@JacobAdamson165 8 жыл бұрын

350 zed?? I didn't know you were Canadian?!

@AnthonyJ350 8 жыл бұрын

+Jacob Adamson Really? There's maple leafs all over my logos. Did you think I just really like maple syrup?

@JacobAdamson165 8 жыл бұрын

AnthonyJ350 OMG it all makes sense now!! Haha Idk how I was so blind?!

@AnthonyJ350 8 жыл бұрын

+Jacob Adamson Maybe I should start saying "eh" more after every sentence and talk about hockey randomly.

@midhun-007 6 жыл бұрын

Ohh that painting went to a disaster 🤧

@AnthonyJ350 Жыл бұрын

Thanks for the feedback!

@kobechrome138 Жыл бұрын

The first year 350z plastic interior parts were not painted they were actually color coded to each car the later 350zs Nissan started painting the interior parts and caused the paints to chip

@AnthonyJ350 Жыл бұрын

Thanks for the comment!

@williammyers8382 6 жыл бұрын

I'd just do the whole door panels a different shade or color and the same on what you just did. Just doesn't look all that great with that grey panel.

@AnthonyJ350 2 жыл бұрын

Thanks for the comment!

@specialformula14 8 жыл бұрын

what works awesome is plasti dip spray !!! its is a very close match in color. and allot more durable than spray paint. my first redo with primer and paint did not last very long.. it didnt scrape off .. but shows scratched in the paint and starts to look ugly..

@st3v3nb915 6 жыл бұрын

You had to sand it after prime and then spray the paint then the clear coat .

@AnthonyJ350 6 жыл бұрын

Steevnb * Can't stand the bad liner, it's textured.

@st3v3nb915 6 жыл бұрын

AnthonyJ350 dam I'm about to paint my car wing had to do it twice to because it had some bad texture but it was cause I didn't sand it after I primed so now I have the smooth finish

@albertojimenez1945 7 жыл бұрын

You should've used flat black bro.

@lordn22 8 жыл бұрын

i did not finish the vieo jet .... but the moment he said he bought a tool to get the pannels out i knew that he is about to fuck up

@lordn22 8 жыл бұрын

+lordn22 oh who would have thought this i was right

@AnthonyJ350 8 жыл бұрын

+lordn22 How did I f*** up taking out the panels? I work on cars for a living so ya I have tools to take apart panels.

@lordn22 8 жыл бұрын

ok first of all you cant be all nice and professional in the youtube comment section that part of the internet is for people to insult each other now to your video its just a typical teckie thing the guy who thought you how to do what you do ...did he had one of those things i guess no ...you don´t need it ...its not better or faster than a screw driver ( wich was good enough for generations ) i just conclouded that you where kind of trying this on a fly and for the first time oh and i ment by fucking up that you added a nother colour skeem to the allready full of greys and blacks interieur ....and why texture paint gonna be a pain in the ass to work with when you whant to change the damn thing

@AnthonyJ350 8 жыл бұрын

lordn22 So to sum it up you're mad because I talked back to you with the same language, I'm just educating people about other tools available to do a job which btw I probably take apart more interior parts in a day then you ever would in a year, so I understand the limitations of only using a screw driver. And I notice a few people don't like the end result in the video, but in person people like the simplicity, ease and look of the panel (I guess it looks different on camera). So don't get mad because I just show people tools they've never seen. That's the whole point, expose them to a different way they might find useful.

@lordn22 8 жыл бұрын

first of all im not mad i was positively surprised that you just asked me how you fucked up ...instead of calling me names for compromising your car and work . i just said that you cant be like that on youtube because especialy car guys just insult each other here ..... then thats the first video of yours that i watched and i did not know your professions and knowleges and when i saw that tool i theught you where exchanging experiance with expencive unnececary tools and the first thought that came to my mind was that you where about to f*** up . especially since interior is a pritty hafty job since you always look at it + you are going to tuch these pannels all the time ...thats why i wrote it now i have the oppinion that you where just trying to keep it simple but with a little more time invested i still think you could have gotten a nicer result in fact i watched a nother video on this topic bevore i watched yours and what that guy was doing was not all that harder ... he just invested more time ....and as you probably know the worst thing you can do when it comes to spray painting is beeing inpacent (by the way i´m german and my vocabulary is limited as well as my spelling sucks i know that, i hope you can get what i mean )