Perfect tutorial for V1 users..This is what actually people searching for..Thank you so much.. :)

What wonderful, straight the point illustration. Love that you have both items side by side for a complete paring. Great job.

After months of idle use I needed a refresher on how to setup and use the XPro with my V1, this explained it perfectly, I'm sure I will forget in the future, but I saved this for future use. Greatly appreciated!

My husband just bought one of this he went through many channels but we couldn't pair. I just came across your video and so clearly explained and now we are all smiles ....thank you sooo much. Greetings from Germany 🇩🇪

I know I am a little behind the ball, but I just got this Godox setup and I could not figure out how to pair my lights and group them, from the manuals. This video was a life saver, and a frustration saver!! Thanks so much!!

Just purchased a V1 and x pro and read the manuals several times but none the wiser, your video enabled me to set these up I just a couple of minutes, brilliant, thank you so much.

Thank you so much for posting this. I normally don't comments but this saved me sending the unit back due to impatience and not understanding the equipment. Cheers and Happy Shooting!!

Oh man!! Thank you, thank you, thank you. I was having such problems syncing my trigger unit with my 2 flashes (all Godox) and after fruitlessly watching countless videos not eh subject I came across your lifesaving video. It seems I had all the setting right but one-I was missing the ID settings. You saved the day. THANKS!!! Cheers, Bob.

I spent 3 hours watching other useless videos then your video was the best that explained the id and Chanel setup

Oh, hell yes! Thanks for taking the time to help me and so many others out with this same setup. Keep on living, my friend.

Quick & easy to understand! Got a realestate job in 20 minutes and the trigger just came in the mail, so cheers for this!

I’ve watched six videos from other bloggers and all of them are garbage only yours helped me thank you so much!!!!❤❤❤❤

30 mins wasted reading the manuals for both trigger and flash, 30 secs into this video I am sorted thanks

went through 10 videos before watching this on, and this one helped me str8 away....thx

Thanks so much for this video, I’m out in Costa Rica doing macro photography among other things, and for the life of me I couldn’t get my flash and trigger to cooperate. A Quick Look at your video and boom, sorted! Thanks man, subscribed and grateful 🙏🏼📸

Thank you! I must have had some interference because I originally had everything set to channel 1, it worked for a day, and it suddenly stopped working the next day. I watched your video, used the scan, found a better channel (in my case, 21) and suddenly everything started working again!

Thank you so much for sharing your knowledge! It helped me to setup X2T with V1C godox. Simple and easy to follow. Thanks again!

Thank you!! All I was missing was connecting with RX! Thanks so so much!

Oh, thanks for this tutorial. Saved a lot of trouble in pairing flash with Xpro.

I've tried everything here with both the XPro-N Trigger and V1N but unfortunately cannot get these to communicate with each other to wirelessly trigger the flash :(

Glad this came up in my search, just picked up the reciever and researching to sync

This one really helps a lot! I got my V1 connected to the trigger easy after this video. Thank you!

Thank you for this super super helpful video! Now that I have all my groups set I hope I don’t ever have to do it again because I won’t remember on the spot 😂

Very helpful video! An incorrect ID setting was preventing me from syncing the flash. Thanks for taking the time to make this video!

Was having a MELTDOWN! thank you thank you thank you!

You’re a life saver, thank you so much. Subscribed

Thanks for this video. I recently got mine and I have to be honest the build quality is fantastic and the prices also great but man if this isn’t the worst menu system I’ve ever used. The buttons seems more contextually based which only would make sense if it was a touch screen device where they can change. Navigation is also confusing and not very intuitive. I might exchange this for the Profoto system even though I’m reluctant to pay their prices.

This was straight to the point... all the other vidoes just wasted my time and or confused me

finally someone is clear about things. Thank you

Thanks for your vid. It really helped me regarding the identity setting. For reasons I wasn't aware of I had managed to accidently set ID=3 on my V1 flash. This effectively meant I was unable to use with my controller, which had it's ID unchanged and set to 'off'. With the ID off on my controller and being unaware of the ID dimension, I had only varied channels and groups successfully controlling multiple AD200s. Up until now everything worked as expected except for my V1, even when set to the correct channel and group. Frustratingly, all I could do with the V1 was use on camera or in slave mode. Now understanding 'ID dimensions' I can alter this successfully too, albeit it's really overkill for my use cases - but good to know it's there. I just now need to 'hack around' in my AD200 menus to see if ID exists there too (I never noticed). I guess the general answer to this and many similar types of problems is that old adage of just RTFM

Haha " you don't need to smash the like button, just press it ... it will still work "

you helped me 2times with this ID Information for Godox ;-) Thank you

Thank you so much! I was really having trouble with that. Your advise got mine working.

Thank you. I have a question. I am a m43 shooter but also own some Nikon DSLRs. I have an xpro o trigger. Do I still need to buy a v1 o flash or just any type of v1 will be triggered by my Xpro o? Essentially, am asking if any xpro trigger can trigger any V1 flash on any camera model?

Perfect! Set up really easily thanks to your video! Thank you!

Awesome instructions man. You saved me a headache trying to sync this. I had the ID set to #2. I changed it to OFF and voila! 🤙🏼

Very helpful video. Thanks

Best Video ever. Thank you very much.

Thank you so much, for your clear explaination ! you saved my tomorrow shoot !!! thanks thanks !!!

The only video that really helped me! Many thanks to you!

Very good, followed through as I watching this.

I wasn't able to get my Nikon d780 to pair. You explain it so well and I followed all the steps and still can't seem to get it to work. Maybe I have a setting on that is causing this. Is there a way we could discuss this further?

Thank you very much. This helped greatly.

Thank you this just saved me hours of searching snd reading this silly manual!

Great tutorial!! What I was looking for. Thanks.

Thank you bro 😫❤️❤️ my problem because the ID was different

Thank you. This was the only video tutorial I found easy to follow. Can you do a video on how to set to change each separate speedlite from the trigger control. Eg a main light and a full light in studio. I’ve successfully set up both to trigger but when I change one they all change.

The video I was looking for. Thank you.

Great video!! Tired to follow dat manual 🤷🏽‍♂️🤦🏽‍♂️…. Thanks 🙏🏽 lad!!

Thank u I had the ID off n that fixed my problem

That was great, thank you! I didn’t know about the id so i was having problems setting up the trigger 👍🏻

That was some good knowledge to spread . tHANK YOU SO MUCH

great Tutorial!!!! Thank you

Awesome tutorial. Thank you so much.

Thank you for this. So simple!

any reason why the camera says RX not slave? Your viceo helped me to synch with trigger, but why does it not say slave? Is that a new flash thing?

Helpful video..... thank you

It doesn't matter how many times I try and do this, it never works. Im starting to think my unit is faulty

Thankyou, that was perfect in getting me set up

Hi great video. Could you show how to set up two or more v1 speed lights I mean actually have a second unit in the video.

Thank you for the help, this is what I needed.

I agree, thank you for posting! Can you share what setting you are using while on your camera? Also, why can’t you change your shutter speed when trigger is on the camera?

very helpful thank you sir good job

This all seems quite straightforward until the part about using Group. There isn't a group of flashes here but only one flash. The "Group" setting seems to used to preprogram the flash to function in a specific mode/power setting. Also it seems essential that in manual mode both trigger and flash must have the same power output selected or can that just be dialed in and adjusted by the trigger?

Thank you, thank you, thank you!!

I don't connect on "B". My trigger connect everything only on "A".? Can you show me how to connect 2 flashes? On A and B.

thank you for this video!!! Btw: same for cullmann trigger kit 500s and cullmann fr 36 !!! Great!

via godox x-pro you don't adjust the zoom of the V1 flash and you don't adjust the intensity of the flash

It helped me alot. 🎉 thanks

Thank you very much!

Very neat! Thank you mate! 🙌

What I mean is say having three units Setting one to 1/1 one to 1/2 and the other to 1/4.

you push and through your finger I can't see what you press. I can not change the CH. It stays on CH1

My Godux V1 is showing only I-TTL and after following the directions twice through- my trigger is not working or connecting with my V1 :(

Watched this and it worked then tried to add my ad400 pro and now neither of them work🤦‍♀️

Thank you so much sir

Nice clear instructions 👌 👍

Thank you so much ❤️

thank but im having trouble updating software even though it pair with my flash godox launcher not working on windows in downloads but logo looks just like blank piece of paper

I know this is a year old -- but when I turn on my V1C and try to get to the "orange" screen -- I am only able to see the screen say "slave." I am not able to get it to say RX. Beyond that -- I've got the same ID, same channel -- but I cannot get the Xpro to trigger the flash. Help -- what am I missing? Please and thank you!

Thank you so much for this tutorial!

Thank you so much ❤

Hi, we try to connected the Godox V1(s) and the Godox Xpro(s) like your video; but by us; we never find out how to make the connection between both. Can someone help us?

Hi. I want to ask if you know some solution for my problem. I have nikon z6 1 and v1 godox. I have bought xpro and it didn't work. I have tried everything.. is there another trigger for z6 and v1 that will work? Thanks

I have just received the X Pro and 2 X1R for nikon SB 800 but there is no way to get them going, I have seen dozens of tutorials but no one has been able to give me a satisfactory answer, do you have any advice? Thank you!

thank you very much, your video helped me a lot, very well explain, top..👍

Helpful , thanks

Thank you so much

Fab video thanks

thank you so much! how do I connect my other flash? I need to trigger 2 flashes? thank you!

Perfect, thank you!

Obrigada por nos ajudar a solucionar o problema de pareamento!

Thank you 🙏

Thank you for sharing....can you tell my why automic go to TTL...i want to shoot manual flash,please?

Thanks, very good.

Awesome thanks lad

Thank u sm u help me a lot

Not working at 2:12. Not able to change the channel

Thanks man😊

Thanks dude