This is one of the best videos on how to do something because there’s more working instead of talking

I built my home in Mexico 35 years ago and after wetting my cement blocks I used the same air gun that used to spray a textured ceiling to spray stucco directly on the block . It’s been this long and my outside walls here in this area of Baja California Mexico is still in great condition.😊

These guys are good, I’ve been doing stucco since 1992 and now days no one wets the block first with is “very important” and yes it’s ok to use a go devil on block but not lath, and that’s exactly right, it’s all about moisture and layers not one shot, THE ROD is the only way to do smooth or float finishes and see how he finishes it side ways?! that is knowledge...Great job!!!

The cleanliness and professionalism at the job site is 🙌🏻, more contractors need to be like clea. And not dirty their surroundings

Please wear a mask I'm 68 and can't breathe I have concrete in my lungs love your work master mason

Miguel makes it look so easy.

So Miguel wears a white shirt and after the job is done his shirt is still white... must be great to work with someone so competent. Good professional video too, thanks!

Oh plus all the names of the tools your using! Closeup of wall was excellent to see the consistency of the mix on the wall, what it should look like! 👍👍keep up the great work & videos! thank you

You guys do quality work. I’ve learned a few tips from you that I’m going to tweak on my own projects

Excellent video. The commentator is professional with a little swag. Love it

Very impressive. Definitely a professional. Great job.👍

Please protect your lungs from cement and silica dust when mixing your mortar.

I knew from when you said wet your walls you had this under control! Made it very easy with your routine.

Great job! I've been doing this kind of work for many many years.

Looking forward to part two. Nice!

Working men👍! A very fine line between a hoddie and a baker,!!!!

True craftsman, very talented. They make it look easy, definitely not easy,

Love how you explain everything & why you do all the extra steps. Excellent youtube video! Subscribed! & don’t regret it. 👍

Very nice, professional work!

Definitely more an "art" than a science. Good job.

Good job! From a stucco company in northern idaho

Love your work , we are watching from the UK cheers from building with Budd 👍

That miguel es chingon!

Excellent video. A lot of good information here.

This was great. You guys not only did an awesome job, but you made the video be enjoyable to watch. Thank you!

Is like tape and float with cement.. respect ✊

These guys are artists.

skilled artists... awesome video

Well done video. Found the music very relaxing.

Miguel makes that looks super easy he got good technique

Great videos man!

THANK YOU For letting people know to properly Pre-Wet the Cinder-Block wall…

Talk about privacy, that is high and looks 👍👍💪, CHINGON!

I liked that applying material technique I wonder if I could use that technique in cement rendering here in Australia as well

Very informative, thank you!

Excellent work nice job

Fantastic job. So many contractors spray and say looks good.

75 Stucco finishers who did not like this video for letting us know how to do it ourselves!

We call the go devil tool the money maker 😂 good vid

So much 2 learn....thanks guys !! 🖒

70’s had grooves! True that!

Believe me he is making it look fairly easy but it’s way harder than you think they did an amazing job

Miguel is the man!

Good job guys !! 👍👍

Es todo mis chingones, keep it up .

I am did same like this plaster when I am doing I feeling so much enjoying,, I will tell you for drying issue use a brush and throw some water on face plaster before shaping... Also sometimes I want to do plaster some kind of mans after making hammering on his face,, I wanted learn how to do decors from concrete then painting I like to amazing architect design,, I love this construction job,,

Thanks for the knowledge

Bout to do it. Dope thank you brother

Yeah, looks easy. Takes a lot of experience. Even pushing the wheel barrow full of mud takes some skill.

Nice Work. Yes, masks when mixing.

Nice video, appreciate your time, peace!

thanks for showing the way.

Nice thanks for sharing 👍

Chingon el Miguelon! Awesome

Nice work.

Is that like 2 parts sand to 1 part concrete? I'm in the midwest we get 100F in summer and - 10F in winter. looking for a mix that will handle the extremes. Thanks for the help.

Great video

a true plasterer can take the mud off the front of the hawk ..most wont bother to use a rod on a wall....or wet the block.. so good job !!!!!

Looks good. If the bid allows add rib lath to the wall and attach with shot pins. That ensures you never see grout lines bleed through.

beautiful ❤

Lol Miguel is doing everything, I just was passing by and decided to recorde !!!! 😂😂😂😂😂😂😂😂

I’m glad I work for myself, because after a day like this, I would need two days off to rest.

does stucco help with water protection? my outside wall is starting to get coerced. Do I sand them down first?

Do you use wire brush or brush wheel to clean off previous paint on cinder block in order to prep for stucco ?

Hi panda, try using masonry sand instead of plaster sand over masonry walls. You wont regret it. Ken from nor cal

Los maestros!

Is it possible to stucco directly on hardy board? If yes, is the process different?

You make it look easy! I have paint on my cinder block wall, do I need to pressure wash all the paint off first?

What form of magic do you use to get it to ignore gravity. I tried it a few times. I put it on the wall it falls off. Works great on the ground.

Buen trabajo 👍🏼👍🏼👍🏼

Very Good workers

I been a stucco mason on the east coast for over 20 years. California seems to be behind the curve just a tad. We use vinyl beads and Jmolds etc. Glad to see you guys using rods too. Atleast you guys arent hacking it up like that Kirk Giordano guy, that guy is the worst I've seen.

Chingo compa!

Nice work ! Hope you make a million bucks but no I'll leave mine to the professionals !!

Miguel has skills!

Can I use type S mortar for this? I have extra bags from the block wall job.

Yeah... Imma jus call Miguel cause he look like he know EXACTLY what he's doing.. LOL

The “ Zen “of plaster. ☮️

I’m waiting on part 2 to finish my wall lol

Ese miguel es chingon.

Same process here in fla over block ,float finish or texture 👍

Looks pretty good but would it be possible to use something more fine grained like how spackle is for drywalls? I'm guessing it will be much easier to work with and much finer finish. just a matter of using very fine sand?

I’m in Austin Texas and had someone do our foundation facing! Wish I had seen this video before we had someone work on it😫! We didn’t know any better so the people that worked on it made a disastrous job of it! They used different types of cement, so our facing has different shades of grey on it!

Can you apply that over a red brick chimney?

Goat Devil :D

Love your videos forever I am making money

A good helper is key

How is the stucco finished at the top? Is it only the facia or is it finished there too?

Did you have to seal the wall first? Or after the stucco is applied?

Professional

nice work cowboys

Thanks for the vid... Mucho squats...

Have you ever had marble sand together with white cement, it's a miracle so beautifully white when it dries, you don't even need to paint it, we use it smooth or thrown rough, rough can be used when a wall is crooked and abnormal.

Is there a product to apply to the wall before adding cement instead of just watering or wetting the wall?

Miguel is so good he can wear a white shrt n blue jeans to a construction job and not even get dirty

Hi Migual,what's the dimensions of the devil board,might make one out of alloy?

can you do this over regular brick wall?

How different yous do it compared to us in Ireland... we do a scud coat first at 2to 1 which is like a splashed on coat.. then scratch coat at 4 or 5 to 1.. then a finish coat at 4 or 5 to1... one coat you usually see every block through it

Nice

Great video! I have a couple of questions. 1. How did you nail the corner bead without blowing out the block? 2. I started to stucco a small courtyard cmu wall in my backyard. I put the whole 1/2” coat in one shot. A big chunk fell off the middle and I noticed a lot of sag on the bottom of the wall. Would you recommend two 1/4” passes to avoid this problem? Thanks for the great videos and your advice! 👍🏼