No video
Detailing 101 - How To Do A Maintenance Wash On A Ceramic Coated Car!
Рет қаралды 100,052
Күн бұрынDetailing 101 - How To Do A Maintenance Wash On A Ceramic Coated Car! In this video, I demonstrate how to care for your ceramic coated car. Ceramic coatings are a great form of paint protection, but still need proper care and maintenance at least once every 2 to 3 months.
✅ Click here to purchase on Amazon: amzn.to/4bIwOXz
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - @PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Gtechniq W4 Citrus Foam: bit.ly/3ooS68J
Gtechniq W3 Ceramic Gwash: bit.ly/3Vru9IR
Gtechniq W1 GWash: bit.ly/3Oze41j
Gtechniq W6 Iron & Fallout Remover: bit.ly/45t2CfW
Gtechniq W9 Water Spot Remover: bit.ly/43ni1fL
Gtechniq C2 Ceramic Sealant: bit.ly/3MRJ9Oz
Gtechniq G6 Perfect Glass: bit.ly/3MS8t71
Gtechniq T1 Durable Tire Gel: bit.ly/3EBycvh
Gtechniq T2 Tire Dressing: bit.ly/3pYmtTI
Gtechniq Crystal Serum Light coating: bit.ly/3BUBqsR
Gtechniq EXO v5 top coat: bit.ly/43oND4v
Gtechniq CSL + EXO v5 kit: bit.ly/3Wx3r3h
Gtechniq wash mitt: amzn.to/421e5A9
Gtechniq drying towel: bit.ly/3MWU6yy
Aluminum work platform: amzn.to/3OAzRI4
Foaming pump sprayer: amzn.to/3IKw5YP
Foam cannon: bit.ly/3MWkvfP
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Mosmatic gun and wand solution: bit.ly/3ovIcPA
Vyper Chair: bit.ly/3B43xVF
Gtechniq products on Amazon USA: amzn.to/3OB65Tv
🇨🇦 For people in Canada:
Gtechniq W4 Citrus Foam: bit.ly/42ZYimL
Gtechniq W3 Ceramic Gwash: bit.ly/41Y4j1H
Gtechniq W1 GWash: bit.ly/422Bamb
Gtechniq W6 Iron & Fallout Remover: bit.ly/3BSC4Hg
Gtechniq W9 Water Spot Remover: bit.ly/3MRHEQx
Gtechniq C2 Ceramic Sealant: bit.ly/3IDeu5b
Gtechniq G6 Perfect Glass: bit.ly/3BSzDog
Gtechniq T1 Durable Tire Gel: bit.ly/3Wutwjc
Gtechniq T2 Tire Dressing: bit.ly/43oOxhp
Gtechniq Crystal Serum Light coating: bit.ly/3WyzaB8
Gtechniq EXO v5 top coat: bit.ly/45MzP5W
Gtechniq wash mitt: bit.ly/3MYYJIp
Aluminum work platform: amzn.to/3qcuR2h
Foaming pump sprayer: amzn.to/3MDQtvQ
Foam cannon: bit.ly/3ChOGaN
Vyper chair: bit.ly/3OP79TF
🇬🇧 For people in the UK:
Gtechniq W4 Citrus Foam: bit.ly/3q5TxJI
Gtechniq W3 Ceramic Gwash: bit.ly/3BRgZgh
Gtechniq W1 GWash: bit.ly/43F92qD
Gtechniq W6 Iron & Fallout Remover: bit.ly/3IBsHzt
Gtechniq W9 Water Spot Remover: bit.ly/430qTbf
Gtechniq C2 Ceramic Sealant: bit.ly/3OAX9h5
Gtechniq G6 Perfect Glass: bit.ly/4398jOA
Gtechniq T1 Durable Tyre Gel: bit.ly/3MzeEvo
Gtechniq T2 Tyre Dressing: bit.ly/433KAPz
Gtechniq CSL ceramic coating: bit.ly/43eREc4
Gtechniq EXO v5 top coat: bit.ly/3MvMeCH
Gtechniq wash mitt: bit.ly/3OE6nZF
Gtechniq drying towel: bit.ly/3BSmYSb
Glass towel: bit.ly/3N3Ylbs
Tire dressing applicator: bit.ly/3N0IUkm
Gtechniq products on Amazon UK: amzn.to/3optqgc
🇫🇷 For people in France:
Gtechniq W4 Citrus Foam: c3po.link/Qhc5...
Gtechniq W3 Ceramic Gwash: c3po.link/Qh6A...
Gtechniq W1 GWash: c3po.link/Qxy7...
Gtechniq W6 Iron & Fallout Remover: c3po.link/QCyU...
Gtechniq C2 Ceramic Sealant: c3po.link/QCk8...
Gtechniq G6 Perfect Glass: c3po.link/QJAs...
Gtechniq T1 Durable Tyre Gel: c3po.link/QyXw...
Gtechniq T2 Tyre Dressing: c3po.link/QhVM...
Gtechniq Crystal Serum Light coating: c3po.link/QxyN...
Gtechniq EXO v4 top coat: c3po.link/QhCv...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
Watch more of my videos:
✅ Gtechniq products brand review: • GTECHNIQ detailing pro...
✅ Application of Gtechniq CSL + EXO ceramic coatings: • ULTIMATE DETAILING OF ...
✅ New Gtechniq EXO v5 ceramic top coat: • NEW Gtechniq EXO v5 Ce...
For more information on the products, visit the official @GtechniqUK website: www.gtechniq.c...
👕 My merchandise store: pantheorganize...
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganize...
🎶 Intro music by Hurley Mower
/ hurleymower
#CeramicCoating #Maintenance #Wash #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing
@PanTheOrganizer Жыл бұрын
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: Gtechniq W4 Citrus Foam: bit.ly/3ooS68J Gtechniq W3 Ceramic Gwash: bit.ly/3Vru9IR Gtechniq W1 GWash: bit.ly/3Oze41j Gtechniq W6 Iron & Fallout Remover: bit.ly/45t2CfW Gtechniq W9 Water Spot Remover: bit.ly/43ni1fL Gtechniq C2 Ceramic Sealant: bit.ly/3MRJ9Oz Gtechniq G6 Perfect Glass: bit.ly/3MS8t71 Gtechniq T1 Durable Tire Gel: bit.ly/3EBycvh Gtechniq T2 Tire Dressing: bit.ly/3pYmtTI Gtechniq Crystal Serum Light coating: bit.ly/3BUBqsR Gtechniq EXO v5 top coat: bit.ly/43oND4v Gtechniq CSL + EXO v5 kit: bit.ly/3Wx3r3h Gtechniq wash mitt: amzn.to/421e5A9 Gtechniq drying towel: bit.ly/3MWU6yy Aluminum work platform: amzn.to/3OAzRI4 Foaming pump sprayer: amzn.to/3IKw5YP Foam cannon: bit.ly/3MWkvfP Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Mosmatic gun and wand solution: bit.ly/3ovIcPA Gtechniq products on Amazon USA: amzn.to/3OB65Tv 🇨🇦 For people in Canada: Gtechniq W4 Citrus Foam: bit.ly/42ZYimL Gtechniq W3 Ceramic Gwash: bit.ly/41Y4j1H Gtechniq W1 GWash: bit.ly/422Bamb Gtechniq W6 Iron & Fallout Remover: bit.ly/3BSC4Hg Gtechniq W9 Water Spot Remover: bit.ly/3MRHEQx Gtechniq C2 Ceramic Sealant: bit.ly/3IDeu5b Gtechniq G6 Perfect Glass: bit.ly/3BSzDog Gtechniq T1 Durable Tire Gel: bit.ly/3Wutwjc Gtechniq T2 Tire Dressing: bit.ly/43oOxhp Gtechniq Crystal Serum Light coating: bit.ly/3WyzaB8 Gtechniq EXO v5 top coat: bit.ly/45MzP5W Gtechniq wash mitt: bit.ly/3MYYJIp Aluminum work platform: amzn.to/3qcuR2h Foaming pump sprayer: amzn.to/3MDQtvQ Foam cannon: bit.ly/3ChOGaN 🇬🇧 For people in the UK: Gtechniq W4 Citrus Foam: bit.ly/3q5TxJI Gtechniq W3 Ceramic Gwash: bit.ly/3BRgZgh Gtechniq W1 GWash: bit.ly/43F92qD Gtechniq W6 Iron & Fallout Remover: bit.ly/3IBsHzt Gtechniq W9 Water Spot Remover: bit.ly/430qTbf Gtechniq C2 Ceramic Sealant: bit.ly/3OAX9h5 Gtechniq G6 Perfect Glass: bit.ly/4398jOA Gtechniq T1 Durable Tyre Gel: bit.ly/3MzeEvo Gtechniq T2 Tyre Dressing: bit.ly/433KAPz Gtechniq CSL ceramic coating: bit.ly/43eREc4 Gtechniq EXO v5 top coat: bit.ly/3MvMeCH Gtechniq wash mitt: bit.ly/3OE6nZF Gtechniq drying towel: bit.ly/3BSmYSb Glass towel: bit.ly/3N3Ylbs Tire dressing applicator: bit.ly/3N0IUkm Gtechniq products on Amazon UK: amzn.to/3optqgc 🇫🇷 For people in France: Gtechniq W4 Citrus Foam: c3po.link/Qhc5H9NWqH Gtechniq W3 Ceramic Gwash: c3po.link/Qh6AbVmV3K Gtechniq W1 GWash: c3po.link/Qxy788fDqf Gtechniq W6 Iron & Fallout Remover: c3po.link/QCyU2wHBRZ Gtechniq C2 Ceramic Sealant: c3po.link/QCk8cUEMCa Gtechniq G6 Perfect Glass: c3po.link/QJAsPmhCCJ Gtechniq T1 Durable Tyre Gel: c3po.link/QyXw3QmfnK Gtechniq T2 Tyre Dressing: c3po.link/QhVMYSNdge Gtechniq Crystal Serum Light coating: c3po.link/QxyNVgzjhs Gtechniq EXO v4 top coat: c3po.link/QhCvTRdWNe
@chrissimmons9969 Жыл бұрын
Awesome timing for this video. I just now am having my new FL5 Civic Type R professionally ceramic coated. Pan does it again……gets us the information and technics we need to properly maintain our paint.
@PanTheOrganizer Жыл бұрын
Thanks Chris! What coating was applied to your car?
@chrissimmons9969 Жыл бұрын
@@PanTheOrganizer I had a full frontal xpel paint protection fiim along with xpel fusion plus ceramic coating. I have done my own ceramic coating in the past, but chose to have the Type R professionally done.
@streetready Жыл бұрын
clean ride
@Paul-mf1vj Жыл бұрын
After watching this, I used fallout/iron remover on a car bodywork (used other similar products only on wheels)for the first time ever. Literally though, I had a purple bonnet. Brought back coating in ways I never expected. Keep up the good work
@PanTheOrganizer Жыл бұрын
Thanks for sharing! And in spring, you can do an even more in depth deep clean for your coating. See how I do it in this video: kzfaq.info/get/bejne/pbqReaiQ1Zizcas.html
@Kurtis922 10 ай бұрын
I’m blown away by how many products and steps there are to maintaining something that was suppose to make things easier
@PanTheOrganizer 10 ай бұрын
It's actually quite simple when you do the steps in real life. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 940,000 subscribers and we have over 124 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@isaacsow 10 ай бұрын
Thank you for making this video! I’ve done this on both of my ceramic coated vehicles. This completely rejuvenated the coating. The finish is slick and beading like crazy again.
@PanTheOrganizer 10 ай бұрын
Glad it helped! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 940,000 subscribers and we have over 124 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@SilveryFoxster Ай бұрын
I recently had a ceramic coating applied to my car, this video is a great help on how to maintain the coat. Thanks Pan 👍
@PanTheOrganizer Ай бұрын
Great to hear! What exact coating was applied to your car? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@whitsundaydreaming Жыл бұрын
Lubricity… I like that. Looks like a great, comprehensive line. I didn’t know that clay was too abrasive for these applications.
@PanTheOrganizer Жыл бұрын
Polishing a coating isn't recommended, as you would damage and strip the coating. Mechanical abrasion and friction will remove the coating. Chemical decon steps are always preferred on coated cars. I would recommend the following steps: 1) Wash the car with a decon shampoo like CarPro Descale. It's slightly acidic pH will help remove minerals and water spots. 2) Rinse it, then use a tar remover if you have tar deposits. 3) Rinse it, then use an iron remover to remove brake dust and industrial fallout. 4) Rinse and dry the vehicle. 5) Then use the water spot remover, which will also help to remove any minerals left on the coating that perhaps are masking its properties. Rinse, and wash the car again. The coating's properties should be restored at this point, assuming the coating is in good shape and was applied properly and is still within its claimed durability. Also, clay bars are abrasive by nature, and again, not recommended on coatings as you would damage the coating and potentially add some marring to the paint. If maintained properly, you shouldn't have much embedded contamination. In some rare cases where you might find some contamination left after all the chemical decon steps, like a bit of grit in the clear coat, you could use a synthetic clay towel (that uses a different clay media compared to traditional clay bars) and lots of clay lube, in order to lightly clay the surface. A clay towel like this one: bit.ly/43nrfce Or this one: bit.ly/43y0Mss But test on an inconspicuous area first!
@matthewstuart2054 5 ай бұрын
I educated myself using your videos to detail and do a cut and polish on my 4 year old car before selling it. It looked better than it did when it was brand new. Sold it within a couple of hours of posting it online. Even though I don’t have a car now, I still watch and love your videos.
@PanTheOrganizer 5 ай бұрын
Cool! Thanks Matthew!
@darylh100 Жыл бұрын
Since the discussion is focused on GTechniq , the products i have tried and like are G1 glass coating and the Smart Fabric protectant. Easy to apply and seem to perform well.
@PanTheOrganizer Жыл бұрын
Thanks for sharing!
@KonstaNykanen Жыл бұрын
Gtechniq makes some quality products👌🏻. Maintenance is key when it comes to ceramic coatings. By following your amazing instructions maintaining a coating is so easy and fun! Fantastic video Pan👍🏻
@PanTheOrganizer Жыл бұрын
You got it!! 😁👍🏻
@KonstaNykanen Жыл бұрын
@@PanTheOrganizer 👍🏻❤️
@streetready Жыл бұрын
Gtechniq is indeed great!
@jfraz6246 Жыл бұрын
Just did a full turtle wax hybrid ceramic treatment to my truck, so this video comes just in time for future maintenance!
@PanTheOrganizer Жыл бұрын
Thanks for watching!
@colinbonnar2302 4 ай бұрын
Thanks Pan. I took the coating plunge and applied Avalon King to my wife's car and Mohs and Skin to my vehicle. Used all your pre application videos did a full polish on both vehicles prior to application. These maintenance tips are appreciated. Eagerly awaiting first wash on both vehicles. Thanks again!
@PanTheOrganizer 4 ай бұрын
Great to hear! Remember to wait at least one week before washing the vehicles. Ideally I’d wait two fulk weeks. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 995,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@carsgonewrong746 Жыл бұрын
Got w6 iron remover for my birthday and cant wait to use before i ceramic spray my car - the packaging is beautiful imo
@PanTheOrganizer Жыл бұрын
👍🏻
@TheCarDetailingChannel Жыл бұрын
This video is jam packed with knowledge. Thanks Pan
@PanTheOrganizer Жыл бұрын
Thanks! I always like to give as much information to my viewers as possible. Knowledge is power.
@TheCarDetailingChannel Жыл бұрын
@@PanTheOrganizerYou’re killing it brother. Can’t wait to see you crack the million mark. Drinks on me if we ever meet haha
@PanTheOrganizer Жыл бұрын
Hehehe thanks man! I can't even believe that goal of 1 million subs is quickly approaching! What a dream this entire thing has been since I started my channel in April 2016. By the end of 2024, we should surpass that million mark if I still have the energy to produce videos. It's super demanding to produce content for KZfaq. One video can take 10-15 hours to produce, and I often film twice as I restart everything in French. Nobody else does this in the detailing world on KZfaq. And since I started my channel, I have never skipped a single week of uploads. Iron man medal someone please? :)
@joshraines Жыл бұрын
Great video! Never would have thought to use an iron remover...would have thought it would degrade your coating.
@PanTheOrganizer Жыл бұрын
Thanks Josh. Yeah using chemical decon is actually recommended to help remove brake dust, embedded contamination, or things like water spots or tar deposits that can mask the coating's properties. And the coating brands always develop chemicals that are compatible with their coatings and won't hurt them.
@joshraines Жыл бұрын
@Pan The Organizer makes total sense! I have Adam's Graphene on my truck...so will pick up some of their iron remover now! Keep up the great videos!
@PanTheOrganizer Жыл бұрын
The Adam's Iron Remover isn't that great. Get an iron remover from a reputable coating brand like Gtechniq, CarPro or Gyeon in my opinion. Here are those three options: Gtechniq: bit.ly/3Na9cAz CarPro: bit.ly/43mzcyj Gyeon: bit.ly/3WPLKM9
@joshraines Жыл бұрын
@Pan The Organizer I have really been liking Gyeon...especially their rim coating...so may have to try their iron remover.
@dashcam2417 Жыл бұрын
I am a great fan of gtechniq . Wheel armour and trim restoration products are amazing .Also Exo is such an easy product to use.
@PanTheOrganizer Жыл бұрын
😁👍🏻
@NITO-zr7ni Жыл бұрын
Thanks again for the knowledge, tips and tricks. Also great work and great job on your videos
@PanTheOrganizer Жыл бұрын
I appreciate it! I put a lot of time and energy into making these videos, so it's always nice to see my efforts don't go unnoticed by my viewers. :)
@NITO-zr7ni Жыл бұрын
@Pan The Organizer for me personally they don't
@PanTheOrganizer Жыл бұрын
Hey, what's your favourite video on my channel so far by the way?
@RafaelMaxwel Жыл бұрын
Thanks for all the knowledge you're sharing. Terrific video! Greetings from Brazil.
@PanTheOrganizer Жыл бұрын
Thanks Rafael! Have a great weekend.
@lemonjames4880 Жыл бұрын
This is going to be good. I just ceramic coated both of my cars :p
@PanTheOrganizer Жыл бұрын
Thanks for watching! Which coating did you apply on your cars?
@lemonjames4880 Жыл бұрын
@@PanTheOrganizer Crystal Serum Light on one and Gyeon One on the other. Both garage queens 👍
@PanTheOrganizer Жыл бұрын
😁👍🏻
@rajfar7 Жыл бұрын
Great, information Pan I have a purchased my dream car and I want to maintain its beauty as long as possible. Finding your channel was a god send and after watching a few of your videos I subscribe immediately. I have also told others about your channel. Keep'em coming my friend and thanks for the reply on ceramic coating my seats. 1 million subscribers..if anyone can Pan can!
@PanTheOrganizer Жыл бұрын
Hehe thank you for the kind words and for your support! It means a lot. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. How did you discover my channel by the way? And what car did you buy?
@denzeljackson6505 Жыл бұрын
@@PanTheOrganizer his content is amazing literally after two videos I subscribed he replies to your questions from videos that he did four years ago you never ever see any content creator do things like that you can just see her as a passion for it more than other guys sorry to say just do it for the money with regards to the KZfaq channels
@denzeljackson6505 Жыл бұрын
@@PanTheOrganizer his content is amazing literally after two videos I subscribed he replies to your questions from videos that he did four years ago you never ever see any content creator do things like that you can just see he has a passion for it more than other guys sorry to say just do it for the money with regards to their KZfaq channels
@PanTheOrganizer Жыл бұрын
Thanks for the kind words and for your support Denzel. I appreciate it!!
@rajfar7 Жыл бұрын
@@PanTheOrganizer I found the channel looking for a good spray cannon and came across your content when you compared several spray cannons. I bought a 2023 Corvette.
@kimnewling5728 Жыл бұрын
Gtechniq makes really cool stuff. I particularly enjoy Ceramic Sealant. Its a bit better then the big names in its class. Thanks Pan.
@PanTheOrganizer Жыл бұрын
Thanks for sharing your thoughts.
@GtechniqNorthAmerica Жыл бұрын
Thanks for the kind words Kim!
@jimwhalen6769 Жыл бұрын
Thank you for explaining the foam soap pre wash process! I did not allow it to do it’s job when I used it. I sprayed it on and started washing and just thought it was a hassle! I was just doing it wrong! Wished you were closer to me, I would love to have you do my wife’s Tahoe! Thanks again and always learn something from each video! Keep up the great work!
@vfigueroa62 Жыл бұрын
I learned everything from you and this channel. Those products sound amazing. 🙌🏼🔥🔥🙌🏼
@PanTheOrganizer Жыл бұрын
Thanks for the feedback. I’m always happy to hear that my viewers are learning by watching my videos. 😁👍🏻
@ShineYourLightDetailing Жыл бұрын
Love the straightforwardness, Pan. Always enjoy your videos. Have a fantastic week ahead!! 👍🏼👍🏼
@PanTheOrganizer Жыл бұрын
Thank you! I always appreciate your support. Have a great week! I think I saw pictures of you at the SDC am I right? 😁
@ShineYourLightDetailing Жыл бұрын
@@PanTheOrganizer Yes, that was me in the royal blue shirt (PapaSmurf918 also had a royal blue shirt on 😊). Absolutely fantastic day with all of them from the first moment to the last moment. Such a wonderful group of people. 👍🏼👍🏼
@PanTheOrganizer Жыл бұрын
They sure are!
@theredscourge Жыл бұрын
Hello again to the hardest working detailer on KZfaq! I'm a novice compared to you, but I'm wondering whether your washing regimen, and that of most of the KZfaq detailer folks, might be a bit excessive, at least for coated cars. Let me know what you think if you can. I bought a brand new car this year with black paint which came with a synthetic sealant. I wanted a ceramic coat, but would have to strip the sealant, so after a great deal of research I decided to just apply the Turtle Wax Hybrid Solutions Graphene spray 2-3x per year since it gives ceramic properties and can be layered on top of other coatings or itself. I applied it after a car wash in mid-April, it's now early June, and I haven't done a proper contact wash or been back to the car wash since! While I don't drive a lot and it doesn't rain much here, I park outside and Calgary is very dusty, so the car gets covered in dust in under a week, yet a pump sprayer pre-soak followed by a waterless wash is all I've needed since mid-April. I do 1-2 washes per week (~30min each time), it's still easy to clean, and hasn't lost its hydrophobic properties! Also I just use tap water and CarPro ECH2O and air dry, and even if I use the very hard water at my parents place I never get water spots. I just don't wash in direct sunlight or else the chemical leaves minor streaks. I'm not sure if my results are due to my chemicals, my wash frequency, or just dumb luck (maybe I'll have problems once I drive through some mud puddles), but so far I'm not seeing any reason I'd need to use foam cannons, pressure washers, the car wash, or even a sponge and bucket until the winter road salt returns.
@PanTheOrganizer Жыл бұрын
The Turtle Wax Graphene Flex Wax is very good, and on its own, I typically see 9-10 months durability in our harsh conditions. Some viewers in gentle climates have reported 10-12 months. So yes it's a very good paint protectant, especially for such a low price. But you still need to reapply more often than a full blown ceramic or graphene coating in a glass bottle. Those typically last 2+ years, many new offerings are now 3-5 years+. They offer even more performance compared to spray products. True coatings have better self-cleaning properties, better hydrophobics, more gloss and slickness, more chemical resistance, etc. But they cost more, and take more prep and time to apply. So it all boils down to your personal preference, experience level and budget. There's nothing wrong with a spray alternative, as long as you stay on top of reapplying when needed.
@just.a.simplejoe 11 ай бұрын
Another great one Pan - hey any chance this same in depth maintenance wash could be done but as a sponsored carpro video or just carpro only products?! I love using things like lift or descale but a proper brake down of their line up in a maintenance scenario would be appreciated!
@Riverguide33 Жыл бұрын
Great vid, Pan. Chock full of info, and the thorough process of surface care. 👍
@PanTheOrganizer Жыл бұрын
Thank you!
@shawnyanak1684 Жыл бұрын
Great Video Pan!!!
@PanTheOrganizer Жыл бұрын
Thanks Shawn!
@ThisOldDetailingDude Жыл бұрын
Just another awesome Pan tutorial! Thank you for all your insights/professional perspective. Wish you were here at SDC. Great time. Met a ton a SUPER people.
@PanTheOrganizer Жыл бұрын
Thanks Tim! A few of my friends are at the SDC. Brian (Apex), Brian (FAB Automotive), Phil (Miranda Detail) and Papa Smurf!
@ThisOldDetailingDude Жыл бұрын
@@PanTheOrganizer met all of them. THEY could not be nicer! Just super super great people
@J1Z06 Жыл бұрын
Definitely a helpful video on preserving coatings. The only coating I've used is the csl/exo combo. Very long lasting and glossy as can be! GTECHNIQ makes fine quality materials. Ceramic GWash looks interesting. I'll pick up a bottle and try it out. Pan, Thanks! And enjoy the weekend.
@PanTheOrganizer Жыл бұрын
Thanks Jay! Have a great weekend too bud!
@J1Z06 Жыл бұрын
@@PanTheOrganizer Thank You very much! Polishing and Coating My best bud's 1990 1LE Lingenfelter IROC Z. It's a monster!
@PanTheOrganizer Жыл бұрын
Rock n Roll baby!!
@duaneconger2910 Жыл бұрын
I just subscribed to your channel and I find your videos to have informative qualities and very knowledgeable about how to get started on how to take care of your car or truck, I would like to see one of you doing a truck and how to go about how to get a quality good detail. Nice Job Pan!
@PanTheOrganizer Жыл бұрын
Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. Here's a video I made about detailing a Chevy Silverado Z71 truck: kzfaq.info/get/bejne/nZh2g8yB0K2YfX0.htmlsi=25sB5agQIjHlmL5u Also, I highly recommend that you watch my Detailing 101 series for beginners, where I explain different steps like iron removers, clay bar, polishing, protection, etc. It's super simple once you understand the basics, and your car will look and feel 100x better! Part 1: how to properly wash your car: kzfaq.info/get/bejne/bbGfnZibl6vXZYk.html Part 2: how to clean wheels and tires: kzfaq.info/get/bejne/pdOnlrGUuL_Hg2w.html Part 3: chemical decontamination (iron and tar removal): kzfaq.info/get/bejne/jcWTrKurmL7Xo4k.html Part 4: clay bar: kzfaq.info/get/bejne/jqhoiMSFqL7ZfJs.html Part 5: machine polishing (paint correction): kzfaq.info/get/bejne/q9mkh6iHrLOzhH0.html Part 6A: how to wax your car kzfaq.info/get/bejne/gcCanLOU2LamonU.html Part 6B: how to apply a ceramic coating: kzfaq.info/get/bejne/qdeBjLmb3azVe2Q.html Part 7: Differences between waxes, paint sealants and coatings: kzfaq.info/get/bejne/asuambN5xtSXm2g.html Part 8: How to clean your car’s interior like a pro: kzfaq.info/get/bejne/jt6Pn6uJrb_UfKM.html
@rubio90r Жыл бұрын
Great job explaining everything pan.
@PanTheOrganizer Жыл бұрын
Thanks Ramon! I appreciate it.
@neilwalker5041 Жыл бұрын
Great looking results as Gtechnique makes strong products. The new EVO looks really glossy and slick which should make a lot of people happy. For those worried about the drying aid just use the drying aid when the vehicle is wet and dry. Then reapply the topper when the paint is dry. Sadly I just ran out of their bug remover as the product always worked. I do have a idea for future videos as the use of a primer polish before applying a ceramic coating has been going through my head a lot. Then again this could be a rabbit hole too. Thank you for another educational video full of tips and tricks!
@PanTheOrganizer Жыл бұрын
Thanks Neil. I think you meant EXO right? EVO is in the Gyeon line of coatings. ;) For primer polishes, there is still much debate on that. Some like using them, some prefer to just IPA wipe, and then apply the coating. However, having visited Dr Beasley's headquarters recently, and having talked with Jim, owner and chemist, he had an interesting take on his primer polishes and his explanation made total sense. I have been testing the NSP line and I'm quite please so far! Here's that interview: kzfaq.info/get/bejne/f96RlrCjq6usmac.html
@neilwalker5041 Жыл бұрын
@@PanTheOrganizer your correct Pan on EXO. I must have been thinking about eating tacos! I ann still ignorant on the bindings of the ceramic to the paint. I can see the primer polish filling in the crevices of the paint which then gives the coating a better grasp. I know when I am over my head and this is one of those moments. The Dr. Beasleys video got my attention along with Miranda’s videos about the polish too. Thank you for thinking about this.
@PanTheOrganizer Жыл бұрын
😁👍🏻
@pappyboyington9489 Жыл бұрын
Gtechniq ont de très bons produits merci pour cette vidéo et les explications sont top !! même si on regarde ta vidéo en anglais on comprend très bien. Merci pan !!
@PanTheOrganizer Жыл бұрын
Merci!
@stevejordan9567 Жыл бұрын
I bought the duraslic HG for my vehicle. Can’t wait to get it on the vehicle.
@PanTheOrganizer Жыл бұрын
Good pick! 😁👍🏻
@anthonycastle9042 Жыл бұрын
Great video on some great products. I have my vehicle coated with CSU and EXO which maintain with only GTechniq products. Always enjoy your informative videos.
@PanTheOrganizer Жыл бұрын
Thanks Anthony! I appreciate the positive feedback!
@the_jnlt_channel Жыл бұрын
Thanks for sharing, i have a Porsche coming soon that is coated and wants me to do a maintenance wash on it 👍
@PanTheOrganizer Жыл бұрын
😁👍🏻
@mcflotty 2 ай бұрын
Thanks!
@PanTheOrganizer 2 ай бұрын
Thanks for helping to support my channel! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@Eric-de7ph 4 ай бұрын
Hi Pan: I watch your videos regularly to learn auto detailing as DIYer. Question for you: Is a ceramic coating that is more than 5 years old be refreshed / decontaminated / reapplied best done indoors or by mobile service? If mobile, can quality results be achieved in only 5 or 6 hours? What price range should I expect to pay for this job? I'm in California. Any advice is greatly appreciated!
@sylvainvachon8095 Жыл бұрын
Bonjour Pan, j'ai fait tout le processus pour installer une céramique sur mon véhicule, la fin de semaine passée. Je suis satisfait a 80 % de mon travail. Dans le garage ou j'ai travaillé, la lumière n'était pas super bonne et j'ai laissé des quelques tourbillons dans les étapes de polissage qui apparaisse au soleil. Malgré ça ma voiture est super belle, mais pas parfaite . C'était ma première expérience et pour un débutant je m'en suis bien sorti. Si c'était a refaire je ferai une coupe plus agressive au début du polissage. Merci pour les tutoriels, ils m'ont beaucoup aidé. Cette semaine le curage a eu lieu au gros soleil, d'après moi la céramique a bien durci. J'ai triché et j'ai relavé après 6 jours et demi.
@PanTheOrganizer Жыл бұрын
Hehe il faut être patient avec les céramiques. Idéalement on attend même deux semaines après l’installation avant de laver sa voiture. Mais bon ça devrait pas être si mal dans ton cas. Quelle céramique as-tu appliqué?
@sylvainvachon8095 Жыл бұрын
@@PanTheOrganizer CQUARTZ UK 3.0 comme céramique avec des produits de Carpro pour le nettoyage et la décontamination Pour le polissage et les tampon j'ai opté pour les produits chemical guys
@sylvainvachon8095 Жыл бұрын
Mettons que l'an prochain je décide de le refaire avec un bon pollisage et des lampes pour voir les tourbillons je pourrais enlever la céramique ?
@AlexDetails Жыл бұрын
Hi PAN, love all of the videos, tips and tricks!! Is there a difference between C2V3 and the Gtechniq QD or at least distinct use cases for each? I have both but really don't see the use for the QD if C2V3 is recommended as a drying aid, top coat, and potentially stand alone product. C2V3 seems like it would be the go-to product as it seems to be a higher level of protection.
@GtechniqNorthAmerica Жыл бұрын
Hey Alex! C2V3 is great for maintenance on a coating or a drying aid! Quick detailer is best used in situations such as a quick wipe off at a car show! Hope that helps!
@PanTheOrganizer Жыл бұрын
Thanks Alex! The guys at Gtechniq gave you the right answer.
@ayalar007 Жыл бұрын
Pan Thank you sooooo much for this absolutely detailed video. I just had my new car coated with the nano diamonds you showcased on your channel and I love it. My question is, what would you recommend to care for nano diamond? Would these products be safe for that or do these products work better with Gtechniq???
@PanTheOrganizer Жыл бұрын
You can use which ever brand of products you want, as long as they're made to be used on ceramic coated cars (or graphene coated, same applies). This includes being able to use Gtechniq products on your coating. You can also use your specific brand's maintenance products should you want to. It's your choice.
@ayalar007 Жыл бұрын
@@PanTheOrganizer thank you. Yeah I got the Diamond Pro tech. My other car had the Carpro ceramic coat. I think I like this better. I’ve seen so many of the products you suggest for maintaining and washing with a car with ceramic coating and it’s extensive and I love washing my car and doing it correctly. So I appreciate everything you put out there and for clarifying.
@PanTheOrganizer Жыл бұрын
Thanks man! I want to share my knowledge and passion with my viewers, so when I read comments like yours, it shows me that I'm doing things right! :)
@ayalar007 Жыл бұрын
@@PanTheOrganizer you sure are. Keep them coming!!! You passion is infectious.
@bjimsondetailing Жыл бұрын
always wonderful and educative videos I don't think you can finish all the products in your garage you need to send some to me
@PanTheOrganizer Жыл бұрын
Hehe thanks!
@ecobritefl2884 3 ай бұрын
I would like to see another video with a other company product line
@PanTheOrganizer 3 ай бұрын
Here’s another ceramic coating maintenance tutorial I made: kzfaq.info/get/bejne/pbqReaiQ1Zizcas.htmlsi=XQMobHt3RjHi4n2E And another one: kzfaq.info/get/bejne/r7KZmLOCt7Oqk2w.htmlsi=EJhWRXqGePPFOHW7
@rivakhoffman4825 Жыл бұрын
Great tutorial for Ceramic coating maintenance! Always a confusing subject for me, as I fear doing too much cleansing will diminish the ceramic coating's Longevity. Pan, is it OK to mix Gtechniq products with my Gyeon Mohs Ceramic coating? Hey! Where is Superstar ANDY today !!!???
@PanTheOrganizer Жыл бұрын
Yes you can use Gtechniq products to maintain your Gyeon coating. No problem. The opposite is also true. You can use Gyeon products to maintain your Gtechniq coating.
@mikebonge7206 Жыл бұрын
Sorry to be a pain but u give two different application pads for ceramic coating One from rag a round white puck Somehow I lost information on second applicator appreciate ur help For the hilly dilly 😊
@johnjohnston2409 Жыл бұрын
Great relaxing video!! Surprised you didn’t mention their Bug Remover. Lol
@PanTheOrganizer Жыл бұрын
Thanks John. The pre-wash snow foam used here has great bug removing capabilities, so it was like a 2-in-1 product. But yes for sure, for those who use other snow foams, and have bug guts, a good bug remover is always a good thing too. Gtechniq has one of my favourite bug removers, here's a link: bit.ly/3OVWs24
@Sergio-pb5bb 4 ай бұрын
Hi pan thank you for another great video with a ton of information. Would you recommend ceramic sealant C2 or Gyeon Q²M Wet Coat for maintenance on your ceramic coating? Or anything else you think would be a good maintenance topper?
@koreywilliams4570 Жыл бұрын
I need to fix some hail damage, replace my windshield and my side mirrors and a couple scratches before I can do a ceramic coating on my car and feel good about it. I also want to paint my stock rims.
@stephengohlke8456 Жыл бұрын
The platform ladder you are standing on to access vehicle roof - can you advise size/make and pros/cons? TYVM...BTW, your vehicle care videos are some of the most informative I've viewed. Keep up the good work.
@PanTheOrganizer Жыл бұрын
I made a video about it here: kzfaq.info/get/bejne/qMlda81hy7HUaY0.html
@josephdefreitas56 Жыл бұрын
one word......beautiful!!!!
@PanTheOrganizer Жыл бұрын
Thank you! Cheers!
@bmm760036 11 ай бұрын
Great straight forward vid, you have a new subscriber.
@PanTheOrganizer 11 ай бұрын
Thanks! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@bmm760036 11 ай бұрын
@@PanTheOrganizer I searched for gtechniq maintenance clean and after watching a couple of different channels I found your channel to be outstanding. Clear instructions, well presented and to the point.
@en3rgy187 Жыл бұрын
I love Gyeon but you've shown with all those bottles there, like $1500 usd! Gyeon is so expensive. I love Gyeon anyway. Thanks so much Pan! Maybe you can make another new video covering the same topic that is not sponsored?
@PanTheOrganizer Жыл бұрын
Gyeon? This video showcased Gtechniq products... I think you are confused lol. I have another ceramic coating maintenance tutorial I made a few years ago, if you want some alternatives, here: kzfaq.info/get/bejne/r7KZmLOCt7Oqk2w.html And also, regardless if a video is sponsored or not, I only showcase products that I like, from brands I love and trust. I have made that very clear over the years on my channel.
@en3rgy187 Жыл бұрын
@@PanTheOrganizer Yikes! Im sorry brother! You're 100% right! I'll chalk it up as a glitch in my matrix lol! Anyway, superior content as always, thank you SO much. You're a terrific person and so darn great at making these videos. I've learned a lot from you.
@Valadcm500 Жыл бұрын
1M lets go!
@PanTheOrganizer Жыл бұрын
😁😁👍🏻👍🏻🤜🏻🤛🏻
@davidmaldonadocastillejos3179 Жыл бұрын
Nice products!
@PanTheOrganizer Жыл бұрын
Thanks for watching David
@Amor1990 Жыл бұрын
I was watching your videos on pump sprayers & I was wondering if you could go into greater depth about the wet/dry/intermediate foam? What products to use with the wet foam. What products to use for the dry foam & what ones to use for the intermediate? All I got was you using wet foam for the tires and wheel wells. What about exterior & interior? What for an alkaline/acidic pre wash or an iron remover. A rinseless wash. The carpet, dash, plastics. Door jambs, etc Really go over what kind of foam for each one. Thx.
@PanTheOrganizer Жыл бұрын
I just use the stock tips that come on them and don’t bother swapping. Takes the guesswork out of it hehe.
@Amor1990 Жыл бұрын
@@PanTheOrganizerWith all due respect that doesn’t answer my question. Which products do you use for each task? What foams good what doesn’t? Product waste or no?
@dmitrireavis1729 Жыл бұрын
I always wonder how they can claim a certain a product lasts for years and months when people are constantly applying other coatings on top. If a product says it has 6 months of durability, shouldn't it last six months without any maintenance?
@GtechniqNorthAmerica Жыл бұрын
Although C2v3 is recommended, it is not required to maintain any of our coatings. We suggest a good wash once a month and a decontamination wash once a year!
@JeffSmith-eq3kc 9 ай бұрын
@@jacobheinz8236I put a DIY detail ceramic coating on my car a few months ago. It is a multi year coating. I just wash my car every two weeks and every other wash I use their ceramic gloss. I'm barely halfway through the $14 bottle of ceramic gloss after almost 4 months and it's an SUV. I just use it to add gloss to the car really. Couple sprays per panel on a wet car after washing and dry. Costs me a couple dollars a month. For most people you coat your car so you DONT have to do this stuff. I think it's just fun for people to add tons of products. Maybe once a year I decontaminate a coated car and it's also just for looks.
@0-60STYLE 7 ай бұрын
Nothing lasts outside man. Coatings are not magic, you can remove it with finishing cream and a very soft pad.
@MrAjmal2010 5 ай бұрын
Fact, even graphene coat does the same but it has durability.
@petersmith7126 4 ай бұрын
It might last 6 months over the summer with very little to no washing and your car is kept in a garage ..... Leave it outdoors in the rain and inclement weather and have to wash it every week and you will degrade it slightly however the better the quality of the coating the longer you should get out of it
@randomstoragespace 11 ай бұрын
Thanks! Great video and very informative
@PanTheOrganizer 11 ай бұрын
Glad it was helpful! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@streetready Жыл бұрын
Very informative and detailed video!
@PanTheOrganizer Жыл бұрын
Thanks! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@streetready Жыл бұрын
@@PanTheOrganizer Pan I've been watching you for a very long time! As a matter of fact you served as a huge inspiration for the business I currently operate today and support my local community with. I know people sometimes don't pass on the credit but I like to, because if it wasn't for detailers like yourself I wouldn't be here. Thanks man! 🤙🏼
@PanTheOrganizer Жыл бұрын
That’s awesome! Thanks for the kind words. Glad to know I can be an inspiration to my viewers. What state/country do you operate your business from?
@streetready Жыл бұрын
@@PanTheOrganizer I'm in the Dallas Fort Worth area in Texas!
@PanTheOrganizer Жыл бұрын
👍🏻
@7yrsbadluck 4 ай бұрын
Hey Pan! Great video! Watched a few minutes and saved to finish it later! Question... My wife's SUV was ceramic coated with a 4 year from Ceramic Pro. It also has PPF on the whole frontend. I wash both of our cars on a weekly basis (even in the winter) and after 13 months, the frontend and trunk seems like the water sticks and there is zero hydrophobic properties. I have been washing it with Optimum No Rinse and every so often Mr. Pink from CMG. Yesterday I finally washed it with CarPro Reset, it helped the lower panels a bit, but, the frontend and trunk are still clinging on to the water, as if there was zero protection. Was I too naive to think that washing weekly would extend the need for a decon on the ceramic coating? I have IronX on the way, to see if that will help before paying the detailer to do their maintenance wash, which I believe is the same (or almost) process as I am doing. And, something tells me I should have gone with a different company for the coating lol...
@PanTheOrganizer 4 ай бұрын
It depends if the coatings is actually dead, or just clogged with minerals, limescale and other contaminants. To find out, watch my ultimate spring coating rejuvenation tutorial here: kzfaq.info/get/bejne/pbqReaiQ1Zizcas.htmlsi=rkcv0aGqg0qIWIRr
@mcflotty 2 ай бұрын
Hi Pan, Just a very quick question. Would I be doing the Iron remover after the pre-wash stage, or after a contact wash? Though you did it after the contact wash in this video, it doesn't mean that's actuall when you did it, and just my brain is telling be I should be doing is after pre wash but before contact wash. Thank you very much for the post.
@jimsgaragetoys Жыл бұрын
Pan, you use a lot of brands that I've never heard of so it's neat to see them. I've used R1 Ceramic Coating for my cars for years with great results. I then use Griot's Garage 3-in-1 Ceramic Spray Wax which I know you really like, it's great stuff. The ceramic Gwash that you used in this video reminds me of the Griot's Garage Ceramic Wash & Coat. Have you tried that product? It's also a low suds formula and I use it on my ceramic coated cars. Thanks for the great videos.
@PanTheOrganizer Жыл бұрын
I have not tried that yet.
@jimsgaragetoys Жыл бұрын
@@PanTheOrganizer Well now you have something new to try out!
@filippofavaro9002 Жыл бұрын
Hey Pan, as always great video. Have you tried recently Labocosmetica products? I think they improved a lot during the last year. They also add new products. Hope that we will see those upgraded and new product on your channel!
@PanTheOrganizer Жыл бұрын
I haven’t, as I don’t see much interest from my viewers as of recently for that brand.
@mitheshpanchal6156 4 ай бұрын
Hi. I wonder if you answer a question, as I watch most of your videos and trust your judgment. I recently had my truck ceramic coated with Gtechniq. However some of the panels don’t bead and I was told that it is due to the fact the panels are plastic and or painted over after leaving the factory. Is this true as I don’t feel they have coated the vehicle correctly. Thanks
@bouchikhimohamed9416 Жыл бұрын
Thanks again Mr Pan, i wold like to filming the ceramic pro if you can
@PanTheOrganizer Жыл бұрын
Thanks for watching!
@ingvarjohanngubergsson1181 Жыл бұрын
Been waiting on this for long
@PanTheOrganizer Жыл бұрын
I hope you enjoyed the video! 😁
@matsudakodo 10 ай бұрын
I did an iron removal step on my new car (built by Mazda in 2023 in Hiroshima and shipped across the Pacific then trucked to the midwest) and I never saw any purple on the car, therefore I don't think it was needed. Doesn't hurt to do it to be sure, though.
@PanTheOrganizer 10 ай бұрын
Exactly. Better safe and go through the motions. A new car is never new until it's properly detailed. - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzfaq.info/get/bejne/h82frNV0kpunfZc.html So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers: Mercedes S 580: kzfaq.info/get/bejne/jNePp8mU3Njdhn0.htmlsi=whord2_UEFSg28UW Aston Martin Vantage: kzfaq.info/get/bejne/hbGXlJaqv7y4oaM.html Volvo XC60: kzfaq.info/get/bejne/qtx0daWW0869dnU.html Tesla Model Y: kzfaq.info/get/bejne/ndWYntZp3baZfo0.html Porsche 911 Carrera: kzfaq.info/get/bejne/aMmbnMynx6zVo2g.html Mercedes AMG GT63S matte black: kzfaq.info/get/bejne/m7torcpi0b7aiI0.htmlsi=oGxoCp8PWt7gTncV Audi Q7: kzfaq.info/get/bejne/qp14dqWEu9TNqoE.html BMW M6 Gran Coupe: kzfaq.info/get/bejne/ZtJzbNiqsL7XaIU.html BMW M340i: kzfaq.info/get/bejne/m9qIm61_xqyUdXk.html Audi RS3: kzfaq.info/get/bejne/bJphoKR7y7GofIE.html Golf R: kzfaq.info/get/bejne/oNhhbMpltb2uo58.html
@DJMEDIC671 2 ай бұрын
Pan ,can you blow dry after you apply the ceramic spray? Or is it recommended to actually wipe it down? And then can I use bead maker or other drying aide’s for exterior wash’s after I do the maintenance wash on a ceramic coated vehicle. As we know these products are costly and not meant for every wash as a business.
@GlacierDetail Жыл бұрын
Great video pan!
@PanTheOrganizer Жыл бұрын
Thank you!
@meryem3270 Жыл бұрын
Question to you !! Why not start with Iron an follout remover first on the entire car and then W4
@GtechniqNorthAmerica Жыл бұрын
Sometimes dirt is trapping the fallout under the surface! W4 helps to pull the contaminants off the surface first!
@PanTheOrganizer Жыл бұрын
Iron fallout removers do one thing: remove iron particles. To do their job best, they need to focus on that task. So pre-cleaning the vehicle is a must in my opinion. That way, the iron remover doesn't have to fight through other dirt and grime before getting to iron particles, that can potentially also be masked by dirt sitting on top. So wash your car, then use chemical decon. Same applies to water spot removers, tar removers, etc.
@meryem3270 Жыл бұрын
@@PanTheOrganizer ok Thanks
@meryem3270 Жыл бұрын
@@GtechniqNorthAmerica Thanks
@meryem3270 Жыл бұрын
My concern is that I have water on the paint and the Iron Fallout remover may not be able to work properly
@manjurahamadmomin6261 Ай бұрын
Thank you so much for Gteqniq ceramic- I would like to know what’s more care need to take with very dusty environment with 38 to 42 degree…… my car gets washed every day with heavy water (contact wash).
@manjurahamadmomin6261 Ай бұрын
My car coated with Getechniq Serum and Exo 5 ….. around 6 months ago
@PanTheOrganizer Ай бұрын
I don't understand your question.
@daveb7999 Жыл бұрын
Hi Pan, Fir tree pitch/ pollen and excessive dust from a nearby sawmill has ruined previous cars we've had. Just got a new Subaru and the dealer applied a ceramic coat. In addition to washing, what do you recommend to protect from pitch/ pollen, and what is best for removing the pitch? Thank You - BTW, appreciate your videos!
@cotto22 Ай бұрын
Hey Pan, once you do the GTechniq 8-step maintenance wash on the car, can you simply do a minor wash in-between the 8-step maintenance wash? And what steps would you recommend for the minor in-between wash?
@PanTheOrganizer Ай бұрын
Yes this maintenance wash you'd do once every 2-3 months. For regular weekly washes, all you need is a pH neutral car shampoo. See how I wash my car weekly here: kzfaq.info/get/bejne/jpadptSW1OCocok.htmlsi=vqU6arE6N17anBFM
@FastRedPonyCar Жыл бұрын
I think this is probably the 12th or so video of your's that I've watched but I'm making sure I do my research here because we're taking my wife's new car to a local professional to get a correction and ceramic coating done (Gtechniq Crystal Serum Ultra/EXO). Here is what I'm planning to get and use in the following order so let me know if anything is wrong or should be done differently or in a different order All done under our pop up canopy (which I've done for years) so no direct sun and no direct Alabama heat. - Wash the wheels and tires with Gtechniq W4 (is this sufficient for tires or do I NEED something like Carpro Retyre?) - Foam the car with W4 and power wash clean - 3 bucket the W3 ceramic wash (I have the buckets and Carpro's wool mitt already) - Spray Gtechniq W6 iron remover and wash (I don't have this yet. Just finished up a bottle of Adam's iron remover though so I know the stuff is essential) - Spray Gyeon Wet Coat (already have as I mentioned on your Wet Coat video) and rinse off - Blower dry the car (optional?) - Apply Gyeon Cure or Shine Supply Clutch (already have both and I believe they both do the same thing) drying the car with microfiber rags in the process - Apply 1 or 2 coats of T2 tire gel Applying Cure/Clutch spray is the only part I'm not really 100% sure on. I own both of them and would like to use them but if I'm already using Gyeon wet coat, are they actually needed or is it just more protection I'm adding? Thanks for all your informative videos though. Definitely helping keep me out of this rabbit hole.
@PanTheOrganizer Жыл бұрын
I would use a tire cleaner like CarPro Retyre for the tires for sure. As far as the rest of your wash procedure is concerned, I'm assuming this will be your MAINTENANCE wash right? AFTER the coating was applied. (Wait 2 weeks after a coating is applied before you start washing your car again). Because if this is the wash you want to perform before a coating is applied, I would say no, as you wouldn't use a shampoo with ceramic protection in it, or sealants like WetCoat, etc. But yes if this will be your maintenance wash procedure that is fine. Good choice on getting a better iron remover, as the Adam's is below average. Once you are done applying the WetCoat, ideally yes you would blow dry the car if you have a blower, it's the fastest way and also 100% contactless drying so zero chances of marring the paint. And after that, you go over the paint a final time with a microfiber towel and your choice of detail spray or silica spray sealant to pick up any residual water droplets (there always are) and boost the existing protection, and gloss/slickness. Or, after having dried the vehicle, if you're satisfied with the finish, no need to add the final spray. WetCoat does the job of protection.
@FastRedPonyCar Жыл бұрын
@@PanTheOrganizer Yep this will be the proposed maintenance wash. Whatever coating is on there next week when we drop it off at the detailed will get removed as they do clay, 1~2 stages of machine correction depending on the condition then a machine polishing and whatever other prep is needed before ceramic. They also keep the car 24~36 hours so the ceramic can cure in their cold/clean room. Not sure how all that works but all 3 major detailers have a cold clean room with UV lamps and air purifiers for ceramics.
@l.f.4603 Жыл бұрын
Hey, Pan. I have been watching your videos since Feb of this year and a recent subscriber. You have helped me keep my cars looking new! Thank you so much! I have been using the Turtle Wax Hybrid Solutions line with great results. However, I haven't found any videos in regards to caring for chrome. I have chrome bumpers and "chrome" plastic trim (emblems, grille, etc) on my truck. Is there anything special I need to do? Thanks again and you have the best car detailing channel on KZfaq!
@PanTheOrganizer Жыл бұрын
Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. For chrome, there isn't anything special to do, assuming it's in good condition. You can typically apply the same paint protection on chrome as well. Chrome plating shouldn't oxidize or rust. It can rust when damaged in an accident for example, or start to be dull over the years. You can use a chrome polish at that point, to help restore it.
@l.f.4603 Жыл бұрын
Thanks, Pan. When my TWHS stock is depleted, I'm going to try out some of the other products you recommend. Keep up the good work. For those of us who are just getting started on auto detailing, we appreciate your knowledge and expertise. 👍
@PanTheOrganizer Жыл бұрын
Thanks for the kind words! What’s your favourite video on my channel so far?
@l.f.4603 Жыл бұрын
I enjoy the Detailing 101 series. A tremendous help!
@antoniograbovac6823 6 ай бұрын
Thanks for a great video. What are your thoughts on the drying towel MF4 if compared to a twist loop towel, for example Dhydrate from CarPro.
@PanTheOrganizer 6 ай бұрын
I prefer twisted loop microfiber drying towels. See my drying towel battle video here: kzfaq.info/get/bejne/e5dghs2etNbXZ3k.htmlsi=t5M34990PEA0opzy
@torofpv420 Жыл бұрын
What can I use or recommend as a quick detailer for in between washes for a ceramic coated car?
@GtechniqNorthAmerica Жыл бұрын
Give our Quick Detailer a shot! Specifically formulated to create a lubricated surface between contaminates and the clear coat.
@PanTheOrganizer Жыл бұрын
You can use the Gtechniq quick detailer for regular washes. Link: bit.ly/3MTVv7P Or any drying aid of your choice, as long as it's compatible with ceramic coatings. I made a video about my favourite drying aids here: kzfaq.info/get/bejne/hLWEgciVlZrciXk.html
@amirchar Жыл бұрын
Love the channel... I have a new 2023 white 4runner (2 months old, garage kept) that I am planning on doing a ceramic coating. Do I need to use iron remover? Also, with a new car, do I need to polish (there are no swirls or holograming). If a polish is a must, what gentle polish would I use?
@PanTheOrganizer Жыл бұрын
Thank you! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. Congrats on getting your new 4Runner! However, a new car is never new until it's properly detailed. - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzfaq.info/get/bejne/h82frNV0kpunfZc.html So you can better visualize the new car prep process, here are the steps I perform on a brand new car from two of my customers: Tesla Model Y: kzfaq.info/get/bejne/ndWYntZp3baZfo0.html Porsche 911 Carrera: kzfaq.info/get/bejne/aMmbnMynx6zVo2g.html Audi Q7: kzfaq.info/get/bejne/qp14dqWEu9TNqoE.html
@immnico 6 ай бұрын
Is there specific chemicals for tree sap/ resin ?? Thank you!
@ZupE891 7 ай бұрын
You didn't mention an APC, which should be used to get off bugs and grime if the car is very dirty
@muradomar5649 Жыл бұрын
MURAD form Toronto 🇨🇦👋👌
@PanTheOrganizer Жыл бұрын
Cheers Murad!
@bobsilva6222 Жыл бұрын
This was a great video. Thank you. Have you heard of problems with ceramic interfering with windshield cameras on Tesla?
@PanTheOrganizer Жыл бұрын
I haven’t.
@bobsilva6222 Жыл бұрын
@@PanTheOrganizer Thank you very much.
@alanhefter4659 Жыл бұрын
Great video. Perfect timing. I have a to a maint wash on a ceramic coated white truck that has rust spots likely from the brake pads. Sounds like iron remover will remove them?
@PanTheOrganizer Жыл бұрын
Hi Alan. The rust spots are most likely brake dust (ferrous particles) that embedded themselves into the clear coat, oxidized/rusted and hence why you see those. Yes an iron remover is meant to help dissolve those. You would proceed exactly as per this tutorial. Depending on how bad they are, a second round of iron remover might be necessary. Wash the car, rinse it, apply the iron remover, let it dwell for the recommended amount of time (don't let it dry on the surface, and don't apply in direct sunlight) then rinse and dry the paint. Look at the results. If there are still specs left, reapply the iron remover on dry paint this time, and gently work it in with a microfiber towel, and rinse. That should do it.
@alanhefter4659 Жыл бұрын
@@PanTheOrganizer thank you very much for the detailed reply 👍I was hoping that would work. Didn't want to have to use my clay towel to remove those especially on a ceramic coating.
@mariopaez8011 Ай бұрын
Im sure this has been answered before but do you rinse off snow foam before contact wash or do you leave snow foam on the car to lubricate contact wash?
@PanTheOrganizer Ай бұрын
Always rinse the snow foam before the contact wash. After you did the initial foam and rinse, you have the option to re-foam and hand wash, for even more lubrication, or go directly to the contact wash. The purpose of the initial foam and rinse, is to get rid of 80-85% of the loose dirt and grit. That way you minimize the dirt left for the contact wash, and also minimize the chances of swirls and scratches.
@chrisginoc 5 ай бұрын
What are your thoughts on using Carpro Reset as the pre-wash foam and then using Gtechniq ceramic wash in my bucket to go over the car with my contact wash with my mitt? Would this be a good combo?
@PanTheOrganizer 5 ай бұрын
Yes absolutely. Or you could use CarPro Lift as your pre-wash snow foam.
@finitolowpez Жыл бұрын
Hi Pan! Thank you for your helpful videos! What's your favorite drying towel?
@PanTheOrganizer Жыл бұрын
Thanks! I made a video highlighting my favourite drying towels here: kzfaq.info/get/bejne/e5dghs2etNbXZ3k.html
@finitolowpez Жыл бұрын
@Pan The Organizer will che it out, thanks Pan for the prompt feedback.
@PanTheOrganizer Жыл бұрын
My pleasure!
@brantschenkrealtor 8 ай бұрын
Love this video!
@PanTheOrganizer 8 ай бұрын
Thanks! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@adampetten1009 Жыл бұрын
I was curious about decontamination. I have graphene cermamic on all my vehicles and im 2 years and bit in on my wifes daily. I noticed the slickness is going or at least a few days later its gone. A few times i was close to getting a clay bar but i should try iron remover. Ive used carpro lift as a wash and reset.
@PanTheOrganizer Жыл бұрын
Now you know. ;)
@BK-oc6lb 3 ай бұрын
Great vids- Subbed! Any product changes since this posted?
@PanTheOrganizer 3 ай бұрын
Thanks! This is still valid and current. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
@BK-oc6lb 3 ай бұрын
I’m getting my ‘25 X5 and ‘24 X3 ceramic coated soon and searched for post-coating care tips… Appreciate the links as well- Gotta step up my cleaning game!
@PanTheOrganizer 3 ай бұрын
🙌🏻
@LuisAvila-mi7xe 3 ай бұрын
Hello Pan. From Panama city, Panama. Great content. I just to heard detailers talk about maintenance wash and know the meaning. Question on the decontamination stage, we could apply tar remover? And if so, how would you add that step on the decontamination. Also, by any change do you have a maintenance wash video using another brand of products? (Sorry but I am not in the US) need some options.
@LuisAvila-mi7xe 3 ай бұрын
Also another question. Which pre wash foam soap from car pro is the safest for car with ceramic coating?
@PanTheOrganizer 3 ай бұрын
Here's another ceramic coating maintenance wash tutorial using different products: kzfaq.info/get/bejne/r7KZmLOCt7Oqk2w.htmlsi=slxvp18k0ea-hb3U
@PanTheOrganizer 3 ай бұрын
Any of the ones in my video here: kzfaq.info/get/bejne/iqmBi8mJqqnWZYU.htmlsi=imexeptDF_aBxfcm
@mrsosa1898 Жыл бұрын
Paaannn 🎉 Got question for you, wich 2 brand should you take ? Gyeon Gtechniq Koch chemie Car pro As a Detailer. ! Ps nice vid!
@PanTheOrganizer Жыл бұрын
All the ones you listed are top tier. You can’t go wrong. Pick the one easiest for you to get, or what ever is less expensive where you live.
@mrsosa1898 Жыл бұрын
@@PanTheOrganizer thanks Paaan for tips! 🥰
@PanTheOrganizer Жыл бұрын
👍🏻
@christaylor8022 Жыл бұрын
Pan, great video! What is your recommendation to wash a ceramic coated car, or any car for that matter, for a person who lives in an apartment? I don't have access to a water hose, etc. So I have to go to a carwash. Needless to say, I never use a tunnel wash or drive through wash. Thanks!
@PanTheOrganizer Жыл бұрын
You could use the rinseless wash method. See my video here: kzfaq.info/get/bejne/pptojJiit8qXf4k.html
@VIDEOHEREBOB Жыл бұрын
Appreciated
@PanTheOrganizer Жыл бұрын
Thanks for watching!! I hope you'll have a great week.
@VIDEOHEREBOB Жыл бұрын
@@PanTheOrganizer You too Buddy
@bobsilva6222 Жыл бұрын
Love gtechniq!
@PanTheOrganizer Жыл бұрын
Thanks for watching Bob!
@bn4241 Жыл бұрын
How is the G2 maintenance spray compared to the Kamikaze Overcoat & Polish Angel High Gloss?
@jasonnlarkin Жыл бұрын
Super informative video as always! I’m planning on ceramic coating a new car next but I can’t store it inside. Can I use a car cover overnight to keep the morning dew off the coating whilst it cures? (I never use a cover but wondering if I should make an exception here).
@PanTheOrganizer Жыл бұрын
Yes you can.
@jasonnlarkin Жыл бұрын
@@PanTheOrganizer Thanks for taking the time to answer. Best start looking for one.
@PanTheOrganizer Жыл бұрын
👍🏻
@Sharma72 Жыл бұрын
This is really interesting. Since my coating I’m not getting any foam or dwell time on the car. It’s like it repels the foam! It’s the same canon you’re using and foam with same dilution I have used countless times before. But as soon as it hits the car, it looks like it’s already been on for a minute or two. The only thing I’ve done differently last wash was to apply Wet Coat. Could that be the problem??
@PanTheOrganizer Жыл бұрын
It's not really a problem if your coating is super hydrophobic and repels stuff, hehe. It's actually a good thing. Also, I don't know what snow foam you are using, and what coating you have. Many variables can influence how runny or "clingy/thick" a snow foam is. Not all snow foams have the same characteristics. Also, do you work outdoors or indoors? I have a much longer dwell time indoors, compared to outdoors that's for sure. Wind and the sun greatly reduce dwell time. You don't want to let the snow foam dry on the surface.
@Sharma72 Жыл бұрын
@@PanTheOrganizer Thanks for the info. I’ve been using ValetPro PH Neutral snow foam which is not the ‘foamiest’ but works for me as my car is never that dirty. The coating is CSL and two coats of EXO V5. I always follow a wash with Wet Coat and final wipe with Cure. That probably explains the lack of foam! Washed outside in a shady protected area. Interestingly, I ‘lightly’ hand polished with CarPro Reflect last time and it has completely brought back the lustre and shine while still remaining very hydrophobic. I think these spray on / top up coatings are great but they do gradually seem to mask some of the depth and shine of the paint.
@joenace6473 Жыл бұрын
Hey Pan, Great Video. Is it okay to use Iron Remover on a ceramic coated car every once in while? thx
@PanTheOrganizer Жыл бұрын
Yes as shown in this video. It’s actually recommended to use iron removers on coated cars once every 3-4 months or as needed depending on your levels of iron contamination.
@michaellee7841 Жыл бұрын
Sometimes I wonder is it really worth putting a coating when you have to maintenance the coating after. Might be about the same work to put some easy to apply wax or seal the car every once in a while when you wash your car.
@PanTheOrganizer Жыл бұрын
I'd much rather have a multi-year coating, to maintain with a spray product every few months, than have to do a monthly or bi-monthly reapplication of a wax, or apply a sealant by hand every 4 to 6 months. Also, coatings have much greater chemical resistance, offer much higher self-cleaning properties, and insane hydrophobics, among other qualities. But it really depends on your personal taste. Some people love to reapply a wax by hand every month, as it's a soothing experience for them. I totally get that. To each their own. As long as people take care of their car, I'm all for it. :)
@luv4life1 Жыл бұрын
Very nice!
@PanTheOrganizer Жыл бұрын
Thank you! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.
Pan The Organizer
Рет қаралды 805 М.
Pan The Organizer
Рет қаралды 278 М.
Cars With Keav
Рет қаралды 16 М.
The Detail Doc
Рет қаралды 52 М.