Рет қаралды 115,060
After using my homemade band saw for a year, I’ve decided I should make some improvements. Back when I built it I used teflon to make the blade guides, but I don’t think this material is hard enough for this purpose.
I’ve also noticed the table is bent because of all the tension it has withstood due to it being made with two plywood pieces glued together and a HPL sheet.
Blog Article: bit.ly/33mXsDG
Band Saw Plans: bit.ly/2JisRjf
Band Saw Playlist: bit.ly/3wYcz5c
Where to obtain the tools that I've used:
Modular Workbech Plans: bit.ly/2V1VzaS
X-Motion DIY Portable Mortiser Plans: bit.ly/3fT7lQE
Band Saw Plans: bit.ly/2JisRjf
Multi-Function Workbench Plans: bit.ly/39eKtrr
Saw Blade & Router Bits Sharpener Plans: bit.ly/2V4YSy7
T-shirts and Stickers: bit.ly/2RMYDET
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#bandsaw #improvements #hpl #bladeguides