Just a suggestion Parker. If you put the name of the unit in your title you will probably get a lot more views. I've searched these specific units to find reviews and installs on them before. And someone not necessarily aware of your channel may become aware through interest in this specific brand. God Bless

I personally have the s8 version and I love it, I can do a bunch of stuff on it and it's got alot of customization options.

I got a headunit like that from dasaita and it has a built in DSP..and they have options for some vehicles that have the factory trim pieces so when you install it it still looks factory..so now my 2015 corolla S has a 10inch touch screen in the dash and it looks factory still...I really really like it..Its like having a tablet in my car I can download games and Netflix and all the regular apps a tablet can get..its pretty bad ass honestly

whats wrong with wire nuts? as long as you get the right size it shouldnt be a problem. only down side i could see is the bulkiness. I would say wire nuts are a better connection than those solder heat shrinks you used. There are videos of them being cut open and you can see the solder doesnt flow through the wire strands like a traditional solder iron would do. I personally solder all my connection with a solder iron but I would still use wire nuts before those hot air solder heat shrink things

I got the Dual 10” head unit with CarPlay and android auto, I was deciding between this one and the Dual and chose dual due to looks and the fact that it has an actual volume knob, but also was only $210. So far it’s been good and has 3 or 4 pre amp outputs too

I'm going to run Kenwood myself. About 379 for the Kenwood or about 500 for a touchscreen I was looking at a lot of units but Kenwood has good pre outs and front rear and sub. I was also looking at a sony unit because Sony has unbelievable sound processing equipment inside of their units for 3d Atmos and just awesome sound so that's why I was looking into Sony I also want to get an old school CD changer hehehe cause I still buy and love CDs but yeah

I just bought one of those screens for $200 for my Subaru, has a built in DSP which is surprisingly impressive. That actually fit and looks really good in that truck. Thanx for the vid

I been using Atoto since they came out. Amazing units. I actually just picked up the S7 8". Love how clean it sounds.

Still have my kenwood kdcx996 single din in my truck. Love the multi line display which is non-existent these days for a single plus it has a great dsp. i have a kenwood double din in my other vehicle. I've heard a lot of good things on that Atoto. Thievery is so outrageous in my entire state that i'll probably leave the o'l kenwood in for a good while yet. Great vid, man! This series is awesome.

Got I into car audio 5 years and and do a lot of builds now love this channel

I've run one of these for about a year and honestly I want to go back to a high quality 1 din, I run a Sony DSX-GS80 in my other car and I wish i could find another. If i need screen/nav i can just use my phone.

Following this build for sure with great interest. I definitely want to see how that head unit holds up with bass in the truck. It looks like a good inexpensive option compared to the rest that I could try in my vehicle if it holds.

I did a budget setup for my nephew with the ATOTO F7 XE (7" double din) and I think it was great for the price ($140 refurb). It has wireless CarPlay/AudroidAuto, it's hard to beat at that price. Sure, it's no Excelon but it gets the job done and the built in mic is convenient. It's the source for a Jensen XDA92RB and a Kicker CXA800.1, the internal amp's rear channels are hooked to his stock rears for rear fill but everything else is amped.

Definitely for clean RCA output you can't go wrong with a Kenwood excelon, they have 5v preamp output.

For everyone who’s new🤣🤣 I been here for 4 years I’m happy to see you are still making videos 🔥

This actually looks perfect for my usage. I have an 08 Scion XD that i just use a BT to aux adapter for and its frustratingly limited. I think this is probably gonna be the way i end up going if i decide to start upgrading my audio system. Thanks!!! Good content!

These have been reviewed by a lot of people. All good or great reviews. I’m thinking of going this route for my build. I think they have a S8. Think that’s the one I’m going with

I've had bad experiences with off brand decks, so I tend to stick with brands that I know will put out quality. That being said, this actually doesn't look bad, and it seems to have more than enough features to get the job done. 😎👍

I bought the Alpine iLX w650 when it first came out for $299 plus shipping. Not they are asking crazy prices for them. They are a great head unit at the $300 Mark if you can find one but they are mostly used at the orice now. It is a 7 inch screen but I bought it because of the sound quality and the ability to just use thumb drives for my music. I carry around tons of drives. The 4 volt pre-outs comes in handy for my amps as well.

Always majorly saving my life motivational.... Love replacement for my double din radio for my Cummins dually tow pig I'm building here.... salute, blessings to everyone grind and Motivations

Thats a nice looking head unit 👌 . I cant wait to hear your setup. Great stuff Parker

You should've got the s8 premium. It has separate 16 band eq's for front and rear and crossover for front and rear. It has time alignment. The only thing it doesn't have is db octave adjustment. It has almost everything that Pioneer has for the audio adjustment, and all it needs is an Audiocontrol Matrix.

That radio u removed and said is useless I'd love to have that radio I've been a subscriber for a very long time and would keep that head unit forever and put it to good use . My head unit was recently stolen and with supporting taking care of my family I cannot afford a new head unit so I'm driving to work with no music . Thanks parker for the awesome video.

Man I hope to see you there I’ve been planning to go as well

gonna check the "pre-outs" with a oscilliscope? that might be interesting

So, being out from the dash a bit, how much does it bounce around when driving?

Great subject matter. Enjoyed your presentation.

I take back what I said about the s8 premium. It has a flimsy data ribbon cable. The unit is not made to be reinstalled multiple times. I can almost guarantee you that something will mess up. You need to run all of everything that you plug into the back the first time because it will break. My unit powers up, but the touchscreen doesn't work anymore. I don't even want a replacement. I'm thinking about getting the F7, but I might just spend money on an Alpine f511? The s8 seemed fine at first, but I took it out to run rca's and the touchscreen stopped working. The F7 data ribbon cable is stationary, but it is loose on the s8.

Nice radio bro

Great video as always Parker

Hey Parker how is that head unit holding up??

I've never used that brand of radio before Don't know how well it is with android auto but this is what I have in my ride and a lot of people tell me I'm crazy for it In Dodge ram 2015 single cab (4) skar TX 6×9 (2) 3.5" TX skar (1) ix 10" sub (1)mico 5ch amp and a Kenwood dnr1007xr head unit

Just bought 1 for my 73 Blazer should be sick af once it's in 💯

I have an Extrons.. bout the same.. I love it.

love this series

Head units are a personal preference but I just perfer something more physical like volume knobs and buttons with a simplistic design but I can see why people want more tech and accessories built into the hu.

How is the atoto holding up ?

Looking forward to see which black brick subs you went with. I’m pretty hype you went 15’s too man, it’s going to slam

I'm here a little earlier than normal, awesome 👌🏾

I have a double din ATOTO in dash unit, and the thing that might hit you with your unit is that ATOTO does not keep time correctly, and I know I wired it up right. Something to watch out for.

Mirror link is super dope

How did you connect the mirror link because I can't connect I have to move it to the iPhone settings

I have this sitting in my garage.. had a internal short, killed my battery. While it worked, it worked well but had to be reset about once a week due to freeze up

That pioneer radio more powerful then that Android radio

Dang, that's a good deal!

In the future, if you get that glare in reflection, just put up a towel in the window

That screen looks pretty cool. You think the bass will have any negative effect on it?

Hi, Can you please do a full review of [10" QLED] ATOTO S8G1104AIO? I am basically interested in internal AMP performance and quality. It promises 4x75W RMS. I'm also keen about touch sensitivity and responsiveness.

I think a volume knob would be a must. But other than that looks pretty solid.👌🏼

Holly crap! The 80’s called and they want their clicky buttons back! Lol.. I mean there is clicky then their is those.. that’s super loud 🤣🤣

I would love to do a big display but I have ac/heat vents right above the head unit. Afraid the heat will affect the display

Personally, I am very interested in the latest Joying headunits. They have many styles and sizes. They were one of the few to have SPDIF digital outputs. Their 2022 units have also included digital coaxial outputs. Thats a game changer since it can control volume. There are lots of DSP's on the market using SPDIF inputs and a lot even have coaxial inputs. They have powerful processors and lots of RAM. You can even upgrade for more RAM and storage space. They also have units that are full touchscreen, have physical buttons or a volume knob plus physical buttons. Their prices are not much more at $300-$440. They even have a similar 10" with single DIN mount with volume knob for $420. They have add-on kits if you want access to OBD2, TPMS, DVR, etc... I've not seen anything comparable.

Did you had to get a specific kind of wire harness for your truck ? I have a Chevy Tahoe 07

Atoto is the biggest bang for the buck!

i have the a6 the s8 line is way more responsive tho, s8 actually has time alignment, they do EVERYTHING tho way more then ull ever need.

Just got the 8” one. Not too bad. Mirror link lags but it works eventually lol

Always awesome videos! This dude said buttons are “clicky” and wow is he right lol

I have a android double din unit and its really cool.

I wanna see how much its going to flex from the bass and if it breaks lol

Just like always Parker keeping the videos interesting..thanks for sharing kee bassing on!! 🙂👍👍

You run your DVD player to those audio video ins

I have a pretty big build in my suv but I’m wondering how it’ll hold up to vibration. Everything is sound deadened except the floor and behind the dash which is too much of an hassle to do. I’m assuming you still have the radio installed with subs, how is it holding up being over a year now?

yes its a cheap head unit but its doing what u need it to do , it a good start up head unit ,like the adjustments for the screen... but if i have the money i would go sony

In mirror link can you use Netflix, Hulu, Disney or any of the other apps like that?

I bought it.... A1... but the clock doesn't keep time, but you can tinker with it in settings

I was thinking about buying one myself is it possible can your factory reverse camera be hooked up

Bro I definitely would love to get this looks awesome !!! Keep the awesomeness brother

Can you show us how to adjust those eq settings and stuff in that sort

Do you have to buy the wiring harness with it? Or does it come with it?

I want to send in my jvc bt-25 so you can hear the difference. 200$ vs that 500$. 2.5v pre out

Is it possible to use a source for music, or whatever, such as USB input or SXM WHILE an app such as weather radar or maps is on the screen from the iPhone.

Definitely reminds me of my Sony xav 8000

have a jvc unit no car play no android auto, but has sirius xm looking for this unit as i want to run maps off phone and hook up my backup cam. but want one with dsp and eq so i might get the a6 instead

Which processor does it have? I think there is a new one with installed DAB+ but i can't find info about the processor. Thank you

You need a relay to power 3 amps remote turn on

I have the same head-unit (F7-XE) but doesn’t have the boost Logo setting. Why not? It’s not in my settings

Nice!

Awesome buddy keep up the good work

I personally prefer a traditional brand name. Mainly for quality and ease of use. Also I haven't had to but I'm sure the support from a reputable brand should be better but not always the case.

Another great video keep them coming

Fitted Atoto 7 to Ducato van,now speado flashing, any suggestions how to fix?

In dash gps has saved my bacon more than once!

Been using these Amazon head units for a while now, my only suggestion is dont apply too much pressure on the screen, the screen cracks super easy.

Need a knob version

Can you show us a 12in speaker budget one and then show us a 12in speaker high-end Ellis why does it make it high end are 15 in subwoofer

The ATOTO head unit looked nice. The only hesitation I would have with that unit is the buttons. They sounded super clicky. I've always preferred volume knobs with a rubbery feel. They don't seem to make those anymore. I believe Kenwood still makes one.

You might need to brace the screen when you get the bass in but we will see it's dope tho

Did radio come with cameras

can you post a link to those connectors I can't find them on Amazon thanks!

do u use the RCA’s or sub outputs on this head unit

Yo bro I have a F7XEDAB plus but I can’t find the subwoofer menu. It looks exactly the same as yours.

I have a joying android unit, extremely good would recommend

Sony gsx 280 is my choice it's 100 watts a channel and is very loud and clear good bass head radio

In my opinion if wire nuts are used correctly they work perfectly fine in that application lol

Can't hurt to try it out bro 👊

Lmaoo im Hispanic and when the name on the display popped up i just had to laugh😂😂😂 love your videos man

Can I install in my grand caravan 2009

I’m lazy.. I don’t wire head-units anymore. I just buy them from crutchfield and pay the extra $21 for them to wire it up so it’s just plug and play for me lol.. Those connectors are cool though. I’ve always used regular bell connectors which is the standard in all low voltage commercial electrical work..

Put an adapter on your heat gun and it cuts the time in half

Should of got the kenwood 10.1