basement wall, now like never happened :)

Thanks please subscribe

Chinese Engineering for the cheapest price possible 😁 If you want designed and made in Germany you can purchase Bosch Professional Line drill hammers, These are still built in country. About 30 minutes from where I live. Probably going to get the Parkside for the times my GSR 12V-35 FC can't handle the task. No point in spending big money on a unit if I only need it twice a year.

@@5Komma5 I got the parkside 2000 watt demolition hammer and me and my neighbor did a joint project. I used my parkside hammer and he used his new €690 bosch hammer. His Bosch stopped working and he had to take to be repaired or replaced as it was still on warranty and we ended up using my cheap park side till project was finished. Don't know if this was a freak event but it certainly made me happy to have bought this tool

This thing is sold by a german grocery store - From tools sold like this you usually can't expect much and you really want to avoid these ;) But this one is surprisingly good. Enough for domestic use.

Βλεπω το σχόλιο σου είναι πριν 2 χρόνια. Δουλευει ακόμα,, γιατί το σκέφτομαι να το πάρω...

Should have a safety clutch, low enough rpm, so why not...

You welcome:)

Hammer action only goes towards the wall, the other side is you pushing against it, so if you want to make stg like an oscillating saw, then likely not. The flat chisel attachment is your masonry "saw".

Most probably some wire got disconnected. But lidl has 2 or 3 year guarantee so check that out before attempting to repair it

@@charlescarabott7692 I got it sorted since, the speed control switch was the problem so I joined wires and it’s working fine now only on top speed which is fine for a hammer drill once I start slow. Thanks for the help though 👍🏻

@@peteracronin OK glad you solved the problem

@@peteracronin also possible to replace the electronic components, once you have opened it anyway...

Could but maybe try a hammer action core at that size (also better for the wall), as this is rated for 32 mm. Any chance you got it and can report how it held up?

parkside is not for professional use

@@dushk0 I used it to drill a 2inch hole through concrete Nd smash walls, tiles etc. It's good value for money. We had one had work for over 2 years so I decided to buy one for my private work. Im a plumber, so I drill a lot of holes.

موجود بالعراق بغداد

4,7kg

@@dainiusm thanks.

no i am good to fix things :)

@@TechGuruAndrew i need the price of this item

69eur, atleast in lithuania

59.99 greece

9:57, 10:53