Part 1 - How to Build a DIY Rear Tire Carrier (Hitch Mounted)

Part 1 - How to Build a DIY Rear Tire Carrier (Hitch Mounted) - Anti-Wobble

Рет қаралды 77,770

Күн бұрын

Version 1 (V1) Tire Carrier Build Plans (inches & metric units): rathasochenda.com/product/gen...
Or here via Etsy:
www.etsy.com/listing/11957233...
Or
Get our NEW and improved design "'Versions 2 (V2) Build Plans and consider purchasing our Universal Tire Carrier Ultimate build-it-yourself kit. It makes the build a snap! Click here to check it out.
rathasochenda.com/product/gen...
In this video, I'll show you How to Build a DIY Rear Tire Carrier (Hitch Mounted) - Part 1 - Anti-Wobble. I'll take you through my DIY process from designing to planning.
Video Chapters
0:00 - Intro
0:40 - Challenges and Goals.
1:50 - Researching Tire Carrier Options
2:49 - Anti -Wobble Concept - How it Works
3:38 - Measurements off the 4Runner
4:00 - Building a wood mockup of the tire swingout
6:05 - How the Swing-Out Works
11:35 - Building the Anti-Wobble Hitch System
16:25 - Testing the Anti-Wobble on the hitch of the 4runner
17:38 - Outro
Links of products/tools used when building the Spare Tire Carrier Swingout:
Weld-On Hitch Reciever: amzn.to/3ugItHZ
Swingout Latch: amzn.to/3L8BiZr
Swingout Lock Pin: amzn.to/3N8wViE
License Plate Light: amzn.to/37Io3Qt
License Plate Rubber Frame Trim: amzn.to/3wndf4I
Trailer Wiring: amzn.to/37CzpWb
Read more about my PC Setup that I use for SolidWorks and video editing: rathasochenda.com/pc-build-2019/
Do you like the music in this video? It's all from the Epidemic Sound library. Use my link to get your first 30 days for free: www.epidemicsound.com/referra...
Follow my projects on Instagram: / ratha.soche. .
Instagram: / ratha.sochenda
Kit: kit.co/ratha.sochenda
LinkedIn: / rathasoch. .
Behance: www.behance.net/rathasochenda
DISCLAIMER:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you 🙏
Due to factors out of my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Be safe!
#tirecarrier #4runner #offroad #rathasochenda #metalfabrication #diy

Пікірлер: 203

@charlesshanefelter233 2 ай бұрын

the anti-wobble device is a game changer

@Esquilax90 2 жыл бұрын

I think it’s great that you’re sharing this info with DIYers when you could easily keep it to yourself and sell the product instead. The video also really spoke to me because you described all the options you considered for carrying your full size spare tire; it’s an issue I’m currently dealing with as well. Keep up the good work!

@RathaSochenda 2 жыл бұрын

Just doing my part to pay it forward! 🤙🏾

@edwinperalta8977 Жыл бұрын

@@RathaSochendahow are you man I would like to buy one if you make me one for my Honda pilot

@RathaSochenda Жыл бұрын

@@edwinperalta8977 Unfortunately I just offer kits. I just don’t have the logistics or space to handle full on welded tire carriers. (maybe one day when I get a a dedicated bigger shop) One other option you may want to consider would be to get the kit and ask local fabricators to weld this up. It should cost somewhere $300-$500 in labor. Others that have purchase the kit and don’t have the tools have gone that this path.

@therealsolo23 3 ай бұрын

Love the wheels and color choices.

@bradleytuckwell4854 2 жыл бұрын

I dig watching you design your builds and than seeing you bring it all together. As always great content thanks for sharing

@RathaSochenda 2 жыл бұрын

Your welcome 🙏🏽 🤙🏾

@tdmallet 2 жыл бұрын

Bro, so simple and humble. Love your content.

@RathaSochenda 2 жыл бұрын

Thank you!

@jasonpelletier3824 2 жыл бұрын

Best channel I've seen hands down. Quality content man, keep it up.

@RathaSochenda 2 жыл бұрын

Thanks Jason!

@yeeeeyee 7 ай бұрын

Ordering a kit soon! I will probably throw some tac welds on just because I don't plan on it coming off any time soon

@jamesgehris757 2 жыл бұрын

New subscriber after the first two minutes. Your delivery and in depth explanation is outstanding. Thank you for this info. I am going to use this info on my own build. Thank you!!

@RathaSochenda 2 жыл бұрын

Thanks man! I’m glad it helped

@kaleintheclouds Жыл бұрын

For someone who has zero background and knowledge in this kind of stuff, it’s extremely interesting to watch you explain it all. Love these videos 🙌🏽

@customcraftnadventure 2 жыл бұрын

Impressive build. I like the anti wobble intelligence. Also I like the idea using wood as a draft piece. I did learn a few things from you.

@RathaSochenda 2 жыл бұрын

Glad you picked up on a few things. 👍

@brandonadams75 Жыл бұрын

Thanks for sharing. Awesome video and great in depth on what and how you did things. Much appreciated

@RathaSochenda Жыл бұрын

🙏

@henrypolo2597 Жыл бұрын

Young man, you are going places. Kudos to you!

@RathaSochenda Жыл бұрын

🙏🏽

@NFAT_Life 2 жыл бұрын

Awesome videos man, I love how in depth you go on your design and prototyping. Video edits are awesome keep posting new stuff. I’m a 4runner guy so started watching your videos because of that but I could watch you build a shoe box your that good 😂

@RathaSochenda 2 жыл бұрын

I appreciate it! 🙏🏽

@tomahawk8754 2 жыл бұрын

Mad skills and props! Keep that content coming.

@RathaSochenda 2 жыл бұрын

Thanks Tom!

@jasonarvizu5296 2 жыл бұрын

Phenomenal job, Ratha! Keep it up, dude!

@RathaSochenda 2 жыл бұрын

🙏🏽

@Mark-ks9jj 6 ай бұрын

Mate I love how you prototyped this build using the wooden model with adjustments, well done. Your easy skill in explaining the process was both informative & entertaining to watch. It also (along with the other parts to this video) show me why the commercial versions of this style of tire carrier are all over $1K, given the fabrication involved, although I suspect your version is way better thought through & built.

@kammoperformance 2 жыл бұрын

Yo! Great lunch break I got in a while! Love the content man. Keep the 🔥🔥 coming

@RathaSochenda 2 жыл бұрын

Thanks Yo!

@Ritebowl Жыл бұрын

Dude your a genius. I love that locking/anti wobble system. I’ll be making that for every hitch I have now. You should get a patent on it. Reese is going to steal that immediately if they haven’t already.

@RathaSochenda Жыл бұрын

Thanks appreciate it! I’m just glad to share it and make it open source.

@williamlanphar630 2 жыл бұрын

Another well thought out, cool project !

@RathaSochenda 2 жыл бұрын

Appreciate it!

@ny6983 2 жыл бұрын

A great video on an awesome build. Keep it up!!!

@RathaSochenda 2 жыл бұрын

🙏🏽

@nickdubois8218 2 жыл бұрын

Great design and love the videos man. Again, the laid back and soothing approach to your video editing is dope. Much better than super loud audio and distracting music in the background and choppy editing. I know that takes effort to do and wanted to let you know it's appreciated! Keep it up man

@RathaSochenda 2 жыл бұрын

Thanks Nick! Yeah I trying to do the multi-camera A-roll technique while speaking in the front of the camera. It’s something new I think I may of overdid it in the beginning. Just trying to mix things up 🤙🏾

@nickdubois8218 2 жыл бұрын

@@RathaSochenda Oh my bad I wasn't comparing this video edits to your older videos, but other people's videos in general :) I've liked all your content so far and look forward to more!

@dolfan78 Жыл бұрын

I was looking for a way to add a rear wheel to my WJ Jeep Cherokee and came across your video. As soon as I saw you designed it using Solidworks it really got my attention. I'm a designer that uses Solidworks at my job. I may have to make one now. Great job on this project!

@RathaSochenda Жыл бұрын

Appreciate it

@jlmknight 2 жыл бұрын

Hey Ratha, you are blowing up. Keep up the quailty content!

@RathaSochenda 2 жыл бұрын

Thanks appreciate it! I’ll do by best

@driftless1870 8 ай бұрын

Phenomenal video. Sub’d out of sheer admiration of your skills. Great craftsmanship.

@RathaSochenda 8 ай бұрын

Appreciate it!

@tich-tuongle9302 2 жыл бұрын

Sup Ratha! This is exactly what I was looking for. I found your video and thought this guy looks familiar. Dude, you installed car alarms for me back in the days. Love your video man.

@RathaSochenda 2 жыл бұрын

Haha yo wassup man!

@chrisurfer83 Жыл бұрын

Dude the wedge lock, well done man!

@RathaSochenda Жыл бұрын

Thanks! Glad you liked it!

@chuggicide836 2 жыл бұрын

Not sure what else to say, this is just awesome man.

@RathaSochenda 2 жыл бұрын

Glad you liked it🤙🏾

@aztecahernandez6539 8 ай бұрын

Wow. Thank you for the knowledge.

@RathaSochenda 8 ай бұрын

Your welcome!

@charliehex Жыл бұрын

I just started tinkering with the idea of building one of these myself a few days ago. Looks like the leg work is done. Just have to decide on your kit or just the plans. Thanks so much, bro.

@RathaSochenda Жыл бұрын

Anytime brotha! If you have any questions feel free to reach out to me.

@RamsesTorresLifevantageIndDist 2 жыл бұрын

Fantastic. Keep up the great content

@RathaSochenda 2 жыл бұрын

Thanks! Rames

@henron22 2 жыл бұрын

Sick!!! bro videos always helpful.

@RathaSochenda 2 жыл бұрын

Thanks Henry

@ostosix 7 ай бұрын

Nice thinking

@CatCityDesign 2 жыл бұрын

Anti-wobble! Love it.

@RathaSochenda 2 жыл бұрын

Thanks! It was great to figure it out and move on to the next part of the build

@SebastianDaniec Жыл бұрын

Great video series, you have inspired me to build my own. I have a background in welding but now work with CAD in the car industry so this fits me like a glove. P.S I like the Anti-Wobble system and where you took your inspiration from!

@RathaSochenda Жыл бұрын

🦾

@narongsakthongkaew9112 Жыл бұрын

Many thanks I prepare this project for my Triton 2012.

@RathaSochenda Жыл бұрын

your welcome!

@narongsakthongkaew9112 Жыл бұрын

@@RathaSochenda already buy your PLAN drawing.

@RathaSochenda Жыл бұрын

@@narongsakthongkaew9112 Thanks hope it helps!

@RxMuscleStrength Жыл бұрын

Great find.

@RathaSochenda Жыл бұрын

Thanks

@GoGoOpie Жыл бұрын

Nice job!

@RathaSochenda Жыл бұрын

Thanks!

@danielelliott5726 Жыл бұрын

Thanks

@RathaSochenda Жыл бұрын

Your welcome 🙏🏽

@chingon_grandpa 2 жыл бұрын

Brilliant 👏 👏 👏

@deerslayer767 Жыл бұрын

Dude that nice!

@RathaSochenda Жыл бұрын

Thansk

@phillippearce9680 2 жыл бұрын

Awesome!👍

@RathaSochenda 2 жыл бұрын

🙏🏽

@davidhines4716 2 жыл бұрын

I’ve always hated that wobble! Now I know how to fix it on any of my hitches!

@RathaSochenda 2 жыл бұрын

I know right. Wobble = Suck. Glad this video helped stay tuned for the next one!

@davidhines4716 2 жыл бұрын

After thinking about it a few minutes, I’m really liking this design, can’t wait for you to post the rest! A few suggestions: 1. Patent this use. 2. Reverse the weld from welded stud, to welded nut, then carry the bolt all the way through like the bike did. That way it can be tightened, or removed from the opposite side (exterior of the car vs underneath). 3. Cut the bolt head off and weld on a locking lug nut head. This will lock your unit on as well.

@dipolautomotive9253 2 жыл бұрын

Awesome !

@RathaSochenda 2 жыл бұрын

Thanks 🤙🏾

@orbelgalvarado 2 жыл бұрын

Dude am doing the same right now for solid works except I am doing a 45 at the tow and 45 on the carrier to make it 90. Edit: that anti wobble is best explain here with that animation. May have to incorporate it now. Thanks man

@jamesbingham4538 2 жыл бұрын

Don't forget tires are stinky when placed inside the vehicle, not to mention space hogs. The wood mockup is a very cool idea.

@RathaSochenda 2 жыл бұрын

🤣

@nenook1000 Жыл бұрын

Awesome work thumbs up from t(e UK

@RathaSochenda Жыл бұрын

Thanks!

@DeadmanR68 2 жыл бұрын

That's so slick 👊

@RathaSochenda 2 жыл бұрын

Thanks!

@DeadmanR68 2 жыл бұрын

@@RathaSochenda if that doesnt already have a patent you should patent it yourself quickly

@RathaSochenda 2 жыл бұрын

I thought about it but there’s a lot of hoops to patent stuff. I guess I’m going for that open source type of approach.

@eqlibrium854 2 жыл бұрын

Solid. 👍

@RathaSochenda 2 жыл бұрын

Thanks 🤙🏾

@marcgonsalves8532 Жыл бұрын

Not sure how many designs there is for something like that. But maybe you can patent that design. Love all the videos.

@noelirabagon6499 2 жыл бұрын

Im also about to build my tire swing im trying to choose among the diff anti wobble .tnx for this info.

@RathaSochenda 2 жыл бұрын

Your welcome!

@keokiheller4351 6 ай бұрын

Dude! GREAT vid! Please patent then mass produce these & put a $149 ($199 shipped) price tag on it! (Built) I’m certain you’ll sell tons or better yet, license it out! I bet there’s a way to make it viable for that. Cheers from Hawaii!🤙🏾🏝️😎

@NFAT_Life 2 жыл бұрын

Also I’ve built one of those before and I know what a pain it is to get everything lined up correctly I wish I would’ve done the wood prototype that would’ve saved me some headache and some steel 😂 🤘

@RathaSochenda 2 жыл бұрын

Fun times 🤙🏾

@randybuerge6348 2 жыл бұрын

Take my money!

@slixxster5118 2 жыл бұрын

Very informative and up close detail on the anti wobble. You plan to build them and sell them if one wanted it? You've gained a new subscriber!

@RathaSochenda 2 жыл бұрын

Thanks you! Possibly.... for now I'm just happy to share what I know and hope to inspire others to build there own or at the very least tried to make it entertaining for others to watch

@slixxster5118 2 жыл бұрын

@@RathaSochenda You most def did. I think it was very useful and informative. Keep it up.

@RathaSochenda 2 жыл бұрын

@@slixxster5118 Thanks I really appreciate it. I'll keep doing my best

@dragade101 2 жыл бұрын

Nice design! You may want to lock the arm to the car with some kind of lock. Maybe theft isnt a huge concern and your default is to have the tyre off unless you are travelling far.

@RathaSochenda 2 жыл бұрын

Thanks! Yup that’s the plan to have a lock when I have it on. I’ll was meaning to show it in part 3 of the tire carrier series where I wrap up all the little details

@Headon89 2 жыл бұрын

Soo good man! Where did you get the model of the Fuel Shok wheel? I run them on my Ranger and I would love to get them into CAD for some product mockups!

@RathaSochenda 2 жыл бұрын

Thanks. I model up the wheel myself.

@snicklefritzd3612 2 жыл бұрын

Dude, I am a Washington guy too....Crock life!!! And showing off all your money by mocking up with 2x4'$ is a baller move. JK, great video man

@RathaSochenda 2 жыл бұрын

Croc life is all I know 😂

@ohsnapsitzjustin 10 ай бұрын

Hey man, love this idea! I saw you ship the v2 out of wa state. I live here too but have no skill in welding. Do you have an option of pick up a complete welded swing out?

@RathaSochenda 10 ай бұрын

Thanks. Unfortunately at this moment I just ship out kits. Maybe you can pick up a kit and can ask around to see if someone can weld one up for you.

@CamaroKid68 2 жыл бұрын

more info on your belt sander? did you make it? I like the videos keep it up

@RathaSochenda 2 жыл бұрын

Look up housemade industrial

@cb__az Жыл бұрын

Hey Ratha, I am following the plans right now in my build. Where did you get the bolts for the build?

@RathaSochenda Жыл бұрын

McMastercarr is good place to start

@fixitric1676 2 жыл бұрын

Awesome build! Are you able to provide your build sheet without the pricing?

@fixitric1676 2 жыл бұрын

So what size square inner tube did you use for the wedge?

@Mr.Mikey.Holiday Жыл бұрын

Saw this same plan on etsy, accept the plan is way more money then you listed yours for.

@RathaSochenda Жыл бұрын

Not quite sure I understand what you mean. Is there a duplicate or copy of someone listing the same plans as I am?

@NickWhite630 2 жыл бұрын

Interesting idea with the wobble system. Did you consider at all using a longer bolt out the front so that it could be tightened without going under the truck?

@RathaSochenda 2 жыл бұрын

Thanks I sort did… the issue is the safety pin gets in the way when you go through the front. And also I’m not a big fan on running a long extension through the receiver and trying to get the proper bolt torque (100ftlbs. Also longer bolt means stretch in the bolt make it weaker unless you compensate with a larger OD bolt. The advantage of fastening it from the back is that as you tighten the nut it removes also the slack of the safety pin which makes everything even tighter. Hope that makes sense 🤙🏾

@NickWhite630 2 жыл бұрын

@@RathaSochenda Ahhhh good call, I wasn't even thinking of the safety pin. I have just had trucks where the back of the receiver is capped which is what made me think of it.

@RathaSochenda 2 жыл бұрын

@@NickWhite630 oh never thought about rigs that had a capped hitch. Good to know.

@edwardhorn4815 Жыл бұрын

I have a 2013 Suzuki SX4. Do you have any ideas how the wheel carriage and Jerry cans can be mounted on the back?

@RathaSochenda Жыл бұрын

Not sure

@jamesmac7040 Жыл бұрын

Really nice calm style to the build. Subscribed. If the car hitch was closed and you could not access the anti wobble bolt from that end, how would you design it? My car has a closed end hitch.

@RathaSochenda 11 ай бұрын

I would cut open the close end.

@jamesmac7040 11 ай бұрын

@RathaSochenda can't modify that tow bar legally in Australia without engineering (insurance wont pay out). Might try and fuse the bolt on the closed end and run the nyloc on the open end from the back of the car

@matthewnoblin9209 2 жыл бұрын

Can you post the links for the parts used for the swing out hinge?

@RathaSochenda 2 жыл бұрын

All that can be found in the link for the build plans.

@dreday4612 Жыл бұрын

Hello, do you have build plans that will work for a 4th gen ram 2500?

@RathaSochenda Жыл бұрын

Should work. You will just need to adjust a few parameters I mention in the video series

@danieljean5419 Жыл бұрын

Can you make one for my 2007 Jeep Grand Cherokee limited and how much it would cost?

@RathaSochenda Жыл бұрын

I just did this one for fun

@morahim5178 Жыл бұрын

Great job.Is it possible to Mount a spare wear tire on tailgate of my Tiguan 2008?thanks

@RathaSochenda Жыл бұрын

If it has a 2” hitch receiver then your 👍

@morahim5178 Жыл бұрын

Thank you very much Ratha,have a nice day.

@RathaSochenda Жыл бұрын

Anytime 🤙🏾

@army3151 Жыл бұрын

What size bushings and bolt did you use?

@RathaSochenda Жыл бұрын

See the link in the description

@walterhassard8257 8 күн бұрын

Is that 1/4" or 3/16?

@tannerhull7192 Жыл бұрын

3”x1.5” square tubing is not a common size near me so would have to order in an entire 20’ft piece which that alone would cost me $150. So just make sure everything is available before deciding on building lol

@RathaSochenda Жыл бұрын

I’m sorry that you don’t have it in your area. Have you tried searching online. There should be a few places you can order a small amount. Or you can also get to make 2x2 work as well.

@TrucknRods Жыл бұрын

hows things man. currently doing the same type of work as yourself. im just curious as to what would you charge or estimate its value if i was to fabricate one for a customer

@RathaSochenda Жыл бұрын

I think you should charge whatever fair to you and client. Not much really I can say because everyone charges differently

@kingbetong8741 Ай бұрын

Hi where do you buy the washer/ bushing for hindge assembly?(what do you call it or parts number)I need to change mine,thanks

@RathaSochenda Ай бұрын

ISOSTATIC, OILUBE OIL IMPREGNATED BRONZE FLANGE BEARING

@kingbetong8741 Ай бұрын

I found some on amazon, one more thing sir, whats size? Im going to order it(i just wanna make sure its the right one) thanks. I already look on your website but your not selling just that one?! Your selling the whole kit for the tire swing. Thanks you sir

@RathaSochenda Ай бұрын

@@kingbetong8741 depends what size tube are you using? From there you should be able to spec out the correct busing

@jefferydoty5141 5 ай бұрын

Can this be modified for a Chevy truck? It looks like it can be.

@RathaSochenda 5 ай бұрын

Yes if should be able to

@myYotarunner Жыл бұрын

Great video!! Are you planning on selling built carriers? Thanks

@RathaSochenda Жыл бұрын

Thanks! Unfortunately not at the moment. I’m just selling the build plans for this for now

@myYotarunner Жыл бұрын

Thank you and keep on creating great content!!👍👍👍🍻

@RathaSochenda Жыл бұрын

Appreciate it🤙🏾

@abbbyt 2 жыл бұрын

Jacks cameo

@jakestephen508 5 ай бұрын

What modeling software did you use?

@RathaSochenda 5 ай бұрын

Solidworks

@kimmyyimmel2010 Жыл бұрын

do you have a version that can accommodate a hitch on the part that swings out?

@RathaSochenda Жыл бұрын

Nope but not sure why that would be useful? But then again it would be easy enough to weld on a receiver hitch to the swing arm portion.

@kimmyyimmel2010 Жыл бұрын

@@RathaSochenda well I want to be able to swing my bike rack out, because if I put the bike rack on the hitch extension already in the plan then I won't be able to swing out the arm or open my tailgate

@RathaSochenda Жыл бұрын

@@kimmyyimmel2010 maybe try just taking a piece a 2.5"x2.5".250" tube and weld it to the bottom side of the swing arm. Will that work for you?

@kimmyyimmel2010 Жыл бұрын

@@RathaSochenda maybe? i am looking to get in touch with a fabrication shop and will pitch the idea to them since i dont know how to weld or own half of the tools i need to make this by myself

@johnny51984 Жыл бұрын

Bro I need one of those so bad

@RathaSochenda Жыл бұрын

Check out my website rathasochenda.com/shop/

@johnny51984 Жыл бұрын

@@RathaSochenda that’s awesome man! I’ll definitely be looking into getting one of your kits here soon. If I had your skill set then I’d go all the way with this. Building overland trailers, bed racks, bumpers, sliders, etc

@RathaSochenda Жыл бұрын

@@johnny51984 right on brotha!

@DESSLOK17327 Жыл бұрын

Where can I buy one!

@RathaSochenda Жыл бұрын

rathasochenda.com/shop/

@xlazyjaysx 2 жыл бұрын

Maybe you could built 1 for my 2021 tundra 😉

@RathaSochenda 2 жыл бұрын

Next time 🤙🏾

@xlazyjaysx 2 жыл бұрын

@@RathaSochenda let me know how much willing to pay for you on this build 😉

@RathaSochenda 2 жыл бұрын

😅

@Hateraz101 Жыл бұрын

do you have any for sale?

@RathaSochenda Жыл бұрын

Unfortunately I do not at the moment but maybe one day

@Hateraz101 Жыл бұрын

@@RathaSochenda Just sell them with a no finish option and a powdercoat option :) I am shopping for one and for a comparable to this, its above $1500

@slim3time Жыл бұрын

🖐🏻Dummy here…I purchased your plans but the bar and tube stock used doesn’t specify the steel type.

@RathaSochenda Жыл бұрын

Cold roll and/or hot roll steel will suffice

@RathaSochenda 2 жыл бұрын

Purchase the Build Plans Here: Version 1 (V1) Tire Carrier Build Plans (inches & metric units): rathasochenda.com/product/gen-1-tire-carrier-build-plans/ Or here via Etsy: www.etsy.com/listing/1195723390/diy-rear-tire-carrier-hitch-mounted?click_key=0b7e9cf9a6d19a7e4f6097c17658f266d01ee91a%3A1195723390&click_sum=f4b6adf7&ref=shop_home_feat_3 Or Get our NEW and improved design "'Versions 2 (V2) Build Plans and consider purchasing our Universal Tire Carrier Ultimate build-it-yourself kit. It makes the build a snap! Click here to check it out. rathasochenda.com/product/generation-2-swingout-5th-tire-rack-build-bundle/ In this video, I'll show you How to Build a DIY Rear Tire Carrier (Hitch Mounted) - Part 1 - Anti-Wobble. I'll take you through my DIY process from designing to planning. Video Chapters 0:00 - Intro 0:40 - Challenges and Goals. 1:50 - Researching Tire Carrier Options 2:49 - Anti -Wobble Concept - How it Works 3:38 - Measurements off the 4Runner 4:00 - Building a wood mockup of the tire swingout 6:05 - How the Swing-Out Works 11:35 - Building the Anti-Wobble Hitch System 16:25 - Testing the Anti-Wobble on the hitch

@novertfrancisco6546 2 жыл бұрын

Hi idol are you filipino american.thanks

@RathaSochenda 2 жыл бұрын

Cambodian

@jorgegordillo7078 2 жыл бұрын

You should patent your anti wobble.

@SRMendezJr 4 ай бұрын

Do you sell them?

@RathaSochenda 4 ай бұрын

I sell a kit check out my website for more info

@arachnopsycho3984 Жыл бұрын

Can I purchase this one from you? How much?

@RathaSochenda Жыл бұрын

I make a built it yourself kit is the closes thing I have to one. More info on it here rathasochenda.com/shop/

@jorgegordillo7078 2 жыл бұрын

The cat 🐈

@RathaSochenda 2 жыл бұрын

🤫

@MC2RD 2 жыл бұрын

They make an anti wobble hitch bracket. It's like 15 dollars

@RathaSochenda 2 жыл бұрын

Yeah and it sucks

@MC2RD 2 жыл бұрын

@@RathaSochenda I like your design better anyway. I've got one but it's for a bike rack. Not a s heavy duty as a spare carrier

@Kusgan4x4 2 жыл бұрын

aye just a business idea.. this may go against the yota gang but!!! a lot of people that own the new 3rd gen frontier would like more aftermarket support which there's is not much. could be $$$ on that etsy account!!!

@RathaSochenda 2 жыл бұрын

Thanks I’ll look into it