So nice of you! thanks a lot

Thanks a lot, Please be with me.

@@OilandGas-inspection-soumen Sir I have a Welding Engineering Master's degree from NIT, but my experience is mainly in bridge fabrication. Can you suggest any way so that I can transition from there to piping/oil&gas/refinery line of work..

@@ThatGuy-vp3un Thanks for the Comment. Since you have welding Engineering related Qualification, It does not matter, You are in which field- Basic Welding is the same everywhere. You can start applying for OIl & Gas field Job. You might need to Get some certification of AWS or CSWIP if you like to work as a welding Inspector. If you like. to stay in the field of COnstruction as a site engineer, Then You only need to appear for the interview, If you can prove your knowledge of Welding, You can get a job for sure.

@@OilandGas-inspection-soumen Thank you sir for your feedback, I have been preparing for CSWIP 3.1, will definitely give exam within 6 months period..

Thanks a lot for the compliment- yes I am trying my best

thank you

Thank You

Sure, I am trying to cover all aspects. As you are fabrication , You can go ahead with the Welding Inspector training and course, Also Painting Qc training and course applicable.

100 %, Please allow me some time, it takes a lot of effort to make a video.

I do not have any kind of research- these all my site experience and my work for my employers- I am purely worked for different construction MNC, who are constructing plants and pipelines

ACTUALLY MOST OF the materials is recollected from my experience, [previous project and google. I want actually almost of all the inspection related things for pipeline in this channel-f or anybody to follow and use. Thanks for your nice comments. But I do not have any single PDF for any video.

Your line service is sour? In that case impact is required and all supplementary variables will be essential

So electrode classification will also be essential

A53 is group1, A106 is group 1 or 2, if same group no issues, but different group for sour service needs separate PQR

Group no is essential variables as per sec9 if it required by design or construction code then only can be applied for low temperature service 😅

Thanks for your interest, to decide type of electrode we need to have some basic knowledge, if the the material is special and not a common one, the best option is manufacturer product books. You can also ask some of the Manufacturer - what are the electrodes they are manufacturing to weld your parent matal. Size of the electrodes are limited from 2.5 mm to 5mm will be used for most of our construction wps. 2.5 is for root and thinner material filling. 3.2 mm is the widely used size for filling capping.

Welders are the best source to share their experience and suggest the best size for any specific welding

@soumen dey thank you sir your response.

The format of a WPS is part of all international standard. The basis content are all the same, Only the limits of essential variables are being changes a bit- based on the design code, service and International or local code requirements

Please let me know what type of hep fro you need? Preparing WPS by your own, needs a lot of practical exposure plus knowledge of the design and qualification code.

soumendeyy@gmail.com

please CHECK welding playlist- i have detailed videos for welding

www.linkedin.com/in/soumen-dey-09971a35/?lipi=urn%3Ali%3Apage%3Ad_flagship3_feed%3BdFkkwfiwQGq8QENFZ4GfZA%3D%3D

This is my linked in ID. You can Txt me.